Abstract:Due to their efficient renewable energy consumption performance, AC/DC hybrid microgrids have become an important development form for future power grids. However, the fault response will be more complex due to the interconnected structure of AC/DC hybrid microgrids, which may have a serious influence on the safe operation of the system. Based on an AC/DC hybrid microgrid with an integrated bidirectional power converter, research on the interaction impact of faults was carried out with the purpose of enhancing the safe operation capability of the microgrid. The typical fault types of the DC sub-grid were selected to analyze the transient processes of fault circuits. Then, AC current expressions under the consideration of system interconnection structure were derived and, on this basis, we obtained the response results of non-fault subnets under the fault process, in order to reveal the mechanism of DC fault propagation. Subsequently, a current limitation control strategy based on virtual impedance control is proposed to address the rapid increase in the DC fault current. On the basis of constant DC voltage control in AC/DC hybrid microgrids, a virtual impedance control link was added. The proposed control strategy only needs to activate the control based on the change rate of the DC current, without additional fault detection systems. During normal operations, virtual impedance has a relatively small impact on the steady-state characteristics of the system. In the case of a fault, the virtual impedance resistance value is automatically adjusted to limit the change rate and amplitude of the fault current. Finally, a DC fault model of the AC/DC hybrid microgrid was built on the RTDS platform. The simulation and experimental results show that the control strategy proposed in this paper can reduce the instantaneous change rate of the fault state current from 19.1 kA/s to 2.73 kA/s, and the error between the calculated results of equivalent modeling and simulation results was within 5%. The obtained results verify the accuracy of the mathematical equivalent model and the effectiveness of the proposed current limitation control strategy.

Analysis of Adaptive Re-closure in AC-DC Hybrid Power System

Overview of Adaptive Reclosing Technique and the Challenge Faced in AC/DC Hybrid Power Grid

A Recovery Method for HVDC Systems Following AC System Faults

A Strategy of Adaptive Reclosure for AC Lines on the Inverter Side of AC/DC Hybrid Grid

An Adaptive Reclosure Scheme for Parallel Transmission Lines with Shunt Reactors

Analysis and Simulation Research of Cascading Faults in AC/DC Hybrid Grid

New Algorithm for Single-phase Adaptive Reclosure of EHV Transmission Lines with Shunt Reactor

Single-phase Adaptive Reclosure Scheme Using Impedance Property of Fault Loop in Shunt-reactored Transmission Lines

A Review of Single-phase Adaptive Autorecloser

An Adaptive Reclosing Scheme Based on Phase Characteristics for MMC-HVDC Systems

Analysis of Beat Frequency Current Amplitude of Transmission Lines with Shunt Reactors

Reliability Evaluation of AC/DC Hybrid Power Grid Considering Transient Security Constraints

AC Fault Characteristic Analysis of AC-DC Hybrid Transmission Grid

Adaptive Sequential Reclosing Strategy for Hybrid HVDC Circuit Breakers in MMC‐based DC Grids

Simulation and analysis of cascading faults in hybrid AC/DC power grids

Influence of Single-phase Reclosing Sequence upon Transient Stability Margin of AC/DC Hybrid Transmission System

Performance Analysis of Phase Selector Device Based on Fault Component in AC-DC Hybrid Power Grid

Adaptive Single-Pole Auto-Reclosing Scheme for Hybrid MMC-HVDC Systems

An Adaptive Reclosing Scheme for Cross-Line Faults on Double-Circuit Wind Power Outgoing Lines with Shunt Reactors

Propagation Mechanism and Suppression Strategy of DC Faults in AC/DC Hybrid Microgrid

Fault Identification Scheme for Protection and Adaptive Reclosing in a Hybrid Multi-Terminal HVDC System