Abstract:The off-design characteristics of an improved recompression supercritical carbon dioxide cycle integrated with a two-stage intercooled main compressor are investigated with a focus on the concentrated solar power application. An off-design model is established for each crucial component of the cycle system of 100-megawatt scale. Four cycle control schemes with different main compressor configurations or/and cycle maximum pressure modes are evaluated and compared. A sensitivity analysis is performed on the parameters related to the cycle thermal input and ambient condition to predict the off-design characteristics due to the plant dispatch and ambient condition change in a solar power plant. The off-design results regarding the cycle thermodynamic performance and operational issue prevention are presented. The effect of the design-point value of the main compressor inlet temperature on the off-design characteristics is evaluated with the comparison among the results at three design points. The results reveal that the compressor surge may occur to the main compressor with basic configuration as the main compressor inlet temperature decreases to a certain value beneath the corresponding design point. By contrast, the surge risk can be prevented with the modified main compressor configuration by activating the recirculation system and the cycle can thus operate normally in the entire off-design range of main compressor inlet temperature. The off-design change in thermal input has overall limited effects on the cycle system control. No operational compressor issues occur for the main compressor with either basic or modified configuration as the thermal input deviates from the design points and varies in the studied ranges. The cycle maximum pressure mode has slight effects on the cycle thermodynamic performance as the thermal input deviates from the design point. The flexible cycle maximum pressure mode has slightly lower sensitivity to the thermal input variation in net output power due to the counteraction of mass flowrate variation. The selection of the design-point value of the main compressor inlet temperature has significant effects on the off-design characteristics of the cycle. A low design-point value of the main compressor inlet temperature leads to less demanding control action for operational issue prevention whereas a high design-point main compressor inlet temperature results in overall more stable thermodynamic performance under off-design conditions. Among other schemes, the fixed maximum pressure mode with the modified main compressor configuration is found to be the most satisfactory one due to the consequent superior efficiency, steady net output power, and free of hazardous operating issues despite the relatively demanding task of compressor surge prevention. The developed control scheme can be further improved by implementing parametric optimization during the off-design operation.

Development and Comparison of Control Schemes for the Off-Design Operation of a Recompression Supercritical CO2 Cycle with an Intercooled Main Compressor

Investigation of Off‐design Characteristics of an Improved Recompression Supercritical Carbon Dioxide Cycle for Concentrated Solar Power Application

Development of Operation Strategy for Recompression Supercritical CO2 Cycle with Intercooled Main Compressor under Off-Design Condition

Off-design Performance and Control Strategies of Sco2 Recompression Power Systems Considering Compressor Operating Safety

Design Optimization and Off-Design Performance Analysis of One-Dimensional Supercritical CO2 Brayton Cycle

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

Research on Recompression Supercritical CO2 Power Cycle System Considering Performance and Stability of Main Compressor

Study on Performances of Supercritical CO2 Recompression Brayton Cycles with Multi-Objective Optimization

One-dimensional optimisation design and off-design operation strategy of centrifugal compressor for supercritical carbon dioxide Brayton cycle

Design and Performance Analysis of a Supercritical CO2 Centrifugal Compressor With Variable Geometry

Off-design Behavior Investigation of the Combined Supercritical CO2 and Organic Rankine Cycle

Optimization of Supercritical Carbon Dioxide Recompression Brayton Cycle Considering Anti-Condensation Design of Centrifugal Compressor

Multimode Operation Control Strategy for Improving Part-Load Performance of Supercritical CO2 Brayton Cycle

Preliminary design and part-load performance analysis of a recompression supercritical carbon dioxide cycle combined with a transcritical carbon dioxide cycle

Design and performance analysis of compressor and turbine in supercritical CO2 power cycle based on system-component coupled optimization

Multimode operation control strategy for improving part-load performance of supercritical CO 2 Brayton cycle

Off‐design performance of supercritical carbon dioxide cycle combined with organic Rankine cycle for maritime nuclear propulsion system under different control strategies

Thermodynamic Study of Main Compression Intercooling Effects on Supercritical CO2 Recompression Brayton Cycle

Effect of Inter-Stage Pressure on Performances of Two-Stage Transcritical CO2 Refrigeration Cycle with Dedicated Absorption Dual-Subcooling and Mechanical Recooling

Quantitative Assessment and Multi-Objective Optimization of Supercritical CO2 Cycles with Multiple Operating Parameters

Quantitative assessment and multi-objective optimization of supercritical CO 2 cycles with multiple operating parameters