Abstract:The long-term effects of SBS-modified binders and rejuvenators on the properties of high-RAP mixtures, especially the cracking resistance, have not been resolved. Therefore, this paper evaluates the cracking resistance of polymer-modified asphalt binders, mastics, fine aggregate matrices (FAMs) and mixtures containing RAP material and a rejuvenator. A series of laboratory tests is performed on different asphalt material scales, including a frequency sweep test; a BBR test for asphalt binders, mastics and FAM mixes; and a dynamic modulus test and the Illinois flexibility index test for asphalt mixtures. Short-term ageing and long-term ageing are also considered for different asphalt material scales. The results show that the asphalt binders and mixes containing RAP materials have similar Glover-Rowe (G-R) values and flexibility index (FI) values to those of the virgin binders and mixtures that are only subjected to short-term ageing. These results indicate that a rejuvenator can partially decrease the stiffness of the RAP material before long-term ageing; however, the cracking resistance of asphalt materials obviously decreases after long-term ageing. Asphalt materials containing RAP are more susceptible than virgin asphalt material to thermal cracking, and the rejuvenator does not improve the long-term cracking resistance of high-RAP material. The correlations between different laboratory ageing conditions for the asphalt binder, mastic, FAM and mixture are analysed. Binders subjected to PAV 20 h ageing present rheological properties equivalent to those of mixes subjected to the long-term oven ageing (LTOA) protocol for 5 d at 85°C. Binders subjected to PAV 40 h ageing present rheological properties equivalent to those of loose mixtures subjected to the LTOA protocol for 12 h at 135°C. The cracking resistance parameters of the binders, mastics and FAMs are also compared with the cracking resistance parameters of the mixture, and the results illustrate that the G-R parameters of asphalt binder, mastic and FAM are well correlated with the G-R parameter and FI parameter of the mixture. Moreover, the G-R parameter can predict the cracking performance of the asphalt mixture.

Influence Factors of Strength and Performance of Foamed Asphalt Cold Recycled Mixture

Effects of Air Void Content on Asphalt Mixture Performance

Factors affecting splitting strength of asphalt mixture

Study on the strength composition mechanism and interface microscopic characteristics of cold recycling asphalt mixture

Measurement of the Promoting Effect of Complex Conditions on the Adhesion Development in Curing Process of Cold Recycling Mixture with Emulsified Asphalt

Influencing Factors of Strength in CRAM Foamed Asphalt

EXPERIMENTAL ANALYSIS ON FATIGUE PERFORMANCE OF HOT RECYCLED ASPHALT MIXTUR OF WATER INSRUSION

The Influence of Recycled Materials on Cold Mix with Foamed Bitumen Properties

Influence of gradation on volume characteristics and engineering performance of asphalt mixture

Laboratory and Field Research on Using Cement and Polyester Fiber to Enhance the Performance of Emulsified Asphalt Cold Recycled Mixture

Investigating mechanical performance and interface characteristics of cold recycled mixture: Promoting sustainable utilization of reclaimed asphalt pavement

Study on the influencing factors of mechanical properties of anti-icing modified asphalt mortar

Analysis of Factors Influencing the Modulus of Hot-Recycled Asphalt Mixture with High RAP

Study on the Road Performance of Foamed Warm-Mixed Reclaimed Semi-Flexible Asphalt Pavement Material

Investigation of Fracture Failure and Water Damage Behavior of Asphalt Mixtures and Their Correlation with Asphalt-Aggregate Bonding Performance

Effect of Mechanical Properties on Performance of Cold Mix Asphalt with Recycled Aggregates Incorporating Filler Additives

Low- and intermediate-temperature behaviour of polymer-modified asphalt binders, mastics, fine aggregate matrices, and mixtures with Reclaimed Asphalt Pavement material

Effect of Coarse Recycled Aggregate on Failure Strength for Asphalt Mixture Using Experimental and DEM Method

Investigation of Moisture Dissipation of Water-Foamed Asphalt and Its Influence on the Viscosity

Fatigue resistance investigation of warm‐mix recycled asphalt binder, mastic, and fine aggregate matrix

Study on Road Performance of Polyurethane Cold-Recycled Mixture