Robust Light Coupling to Photonic Crystal Waveguide Using Integrated Metalens

Yahui Xiao,Zi Wang,Feifan Wang,Hwaseob Lee,Thomas Kananen,Tingyi Gu

DOI: https://doi.org/10.1364/cleo_at.2020.jth2b.20

2020-01-01

Abstract:We demonstrate robust and low loss coupling into photonic crystal waveguide by using a one-dimensional dielectric metalens.

What problem does this paper attempt to address?

Subwavelength-Confined Hybrid Surface Modes of Low Attenuation in Cylindrical Metallic-Dielectric Waveguides

Luojia Wang,Ying Gu,Xiaoyong Hu,Baoqing Sun,Limin Tong,Qihuang Gong

DOI: https://doi.org/10.1209/0295-5075/96/37002

2011-01-01

Abstract:Subwavelength-confined hybrid surface modes of low attenuation were found in a cylindrical waveguide with a high-permittivity-dielectric nanocore nested in a metallic nanotube. When phase-matching conditions are met, mode transfer occurs, which is associated with a strong anti-crossing behavior. At the transfer radius, a hybrid mode with superior properties, namely low propagation attenuation and high light confinement, transforms into the other that has inferior properties. Thus, the superior mode with subwavelength confinement can be efficiently excited through this mode-transfer process when we taper the nested nanocore. This nanoscale cylindrical metallic-dielectric waveguide may have applications in high-density integrated photonic circuits, plasmonic sources, and biosensing techniques. Copyright (C) EPLA, 2011
Ring Resonator of Hollow-Core Photonic Crystal Fiber Based on Spatial Coupling Scheme

Wen Fan,Xuan She,Heliang Shen,Fei Huang,Ran Bi,Kan Chen,Xingfan Chen,Xiaowu Shu

DOI: https://doi.org/10.1109/jlt.2023.3263293

IF: 4.7

2023-01-01

Journal of Lightwave Technology

Abstract:In this article, we proposed a hollow-core photonic crystal fiber (HCPCF) ring resonator based on a spatial coupling method, and the component is only 22 × 30 × 6 mm 3 . When using a 7-core photonic crystal fiber with a mode field diameter of 10um, a ring resonator with the measured finesse of 18 can be built, indicating that the coupling loss is as low as 0.41 dB. Compact and low-loss closed resonator is accomplished using a highly integrated free space silicon optical bench manufactured by deep silicon etching and tiny optical lens package technology, which promotes the practicality of the HCPCF gyro. In addition, two important factors affecting the spatial optical coupling efficiency, the lens type and the fiber mode field size, are investigated in this article. The obtained results are instructive for all spatial optical coupling systems.
Engineering the light coupling between metalens and photonic crystal resonators for robust on-chip microsystems

Yahui Xiao,Zi Wang,Feifan Wang,Hwaseob Lee,Thomas Kananen,Tingyi Gu

DOI: https://doi.org/10.48550/arXiv.2103.05580

2021-03-10

Abstract:We designed an on-chip transformative optic system of a metalens-photonic crystal resonator metasystem on a foundry compatible silicon photonic platform. By adjusting the on-chip metalens' focusing length and mode dimension, the insertion loss between the metalens and the photonic crystal resonator and waveguide structures are minimized through mode-matching. The micro-system does not involve any single mode silicon nanowire waveguide, and thus mechanically robust without any oxide claddings. The proposed microsystem is ideal for miniaturized chemical and biosensors operating in air or solution environment.

Optics
Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Yi Song,Jing Wang,Qiang Li,Min Yan,Min Qiu

DOI: https://doi.org/10.1364/oe.18.013173

IF: 3.8

2010-01-01

Optics Express

Abstract:Efficient broadband coupling of light between a dielectric waveguide and a hybrid plasmonic waveguide is investigated theoretically. A plasmonic linear taper is used as a coupler which connects the two types of waveguides. Broadband coupling is realized by such a compact plasmonic taper with a length of only 0.4 microm, which achieves a coupling efficiency of 70% (1.5 dB) at the 1.55 microm telecommunication wavelength.
Efficient Waveguide Coupler Based on Metal Materials

Wenjun Wu,Junbo Yang,Shengli Chang,Jingjing Zhang,Huanyu Lu

DOI: https://doi.org/10.1117/12.2199481

2015-01-01

Abstract:Because of the diffraction limit of light, the scale of optical element stays in the order of wavelength, which makes the interface optics and nano-electronic components cannot be directly matched, thus the development of photonics technology encounters a bottleneck. In order to solve the problem that coupling of light into the subwavelength waveguide, this paper proposes a model of coupler based on metal materials. By using Surface Plasmon Polaritons (SPPs) wave, incident light can be efficiently coupled into waveguide of diameter less than 100 nm. This paper mainly aims at near infrared wave band, and tests a variety of the combination of metal materials, and by changing the structural parameters to get the maximum coupling efficiency. This structure splits the plane incident light with wavelength of 864 nm, the width of 600 nm into two uniform beams, and separately coupled into the waveguide layer whose width is only about 80 nm, and the highest coupling efficiency can reach above 95%. Using SPPs structure will be an effective method to break through the diffraction limit and implement photonics device high-performance miniaturization. We can further compress the light into small scale fiber or waveguide by using the metal coupler, and to save the space to hold more fiber or waveguide layer, so that we can greatly improve the capacity of optical communication. In addition, high-performance miniaturization of the optical transmission medium can improve the integration of optical devices, also provide a feasible solution for the photon computer research and development in the future.
Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

rakesh g mote,hongson chu,ping bai,erping li

DOI: https://doi.org/10.1016/j.optcom.2012.04.037

IF: 2.4

2012-01-01

Optics Communications

Abstract:A coupler is proposed to interface a hybrid dielectric-loaded plasmonic waveguide (HDLPW) with a silicon photonic slab waveguide. The HDLPW is firstly designed and optimized to attain the best tradeoff between the mode confinement and the propagation distance. The designed coupler is inspired from the taper configuration and numerically modeled through finite-difference time-domain (FDTD) simulation. The results demonstrate that a high confinement and low loss of the energy is achieved from a silicon photonic slab waveguide into the dielectric slot of area 50×200nm2 in the HDLPW. The transmission attained through the coupler with a compact size of 400nm is found to be as high as 80% (1dB). Further, the planar nature of taper configuration makes the coupler easy to fabricate using the state-of-the-art CMOS facilities. The proposed coupler is useful in enabling the integration between photonic and hybrid plasmonic waveguides and thus realizing on-chip hybrid integrated circuits.
Optomechanical coupling in photonic crystal supported nanomechanical waveguides

W.H.P. Pernice,Mo Li,Hong X. Tang

DOI: https://doi.org/10.1364/OE.17.012424

2009-06-02

Abstract:We report enhanced optomechanical coupling by embedding a nano-mechanical beam resonator within an optical race-track resonator. Precise control of the mechanical resonator is achieved by clamping the beam between two low-loss photonic crystal waveguide couplers. The low insertion loss and the rigid mechanical support provided by the couplers yield both high mechanical and optical Q-factors for improved signal quality.

Optics
Structurally-tolerant Vertical Directional Coupling Between Metal-Insulator-metal Plasmonic Waveguide and Silicon Dielectric Waveguide

Qiang Li,Min Qiu

DOI: https://doi.org/10.1364/oe.18.015531

IF: 3.8

2010-01-01

Optics Express

Abstract:Vertical directional coupling between a metal-insulator-metal (MIM) plasmonic waveguide and a conventional dielectric waveguide is investigated. The coupling length, extinction ratio, insertion loss and coupling efficiency of the hybrid coupler are analyzed. As an example, when the separation between the two waveguides is 250 nm, a maximum coupling efficiency of 73%, an insertion loss of -1.4 dB and an extinction ratio of 16 dB can be achieved at a coupling length of 4.5 microm at 1.55 microm wavelength. A particular feature of this hybrid coupler is that it is highly tolerant to the structural parameters of the plasmonic waveguide and the misalignment between the two waveguides. The performance of this hybrid coupler as a TM polarizer is also analyzed and a maximum extinction ratio of 44 dB and an insertion loss of -0.18 dB can be obtained. The application of this hybrid coupler includes the signal routing between plasmonic waveguides and dielectric waveguides in photonic integrated circuits and the polarization control between TE and TM modes. In addition, it provides an approach for efficiently exciting MIM plasmonic modes with conventional dielectric modes.
High-efficiency Coupling Structure for a Single-Line-defect Photonic-Crystal Waveguide.

DW Prather,J Murakowski,SY Shi,S Venkataraman,A Sharkawy,CH Chen,D Pustai

DOI: https://doi.org/10.1364/ol.27.001601

IF: 3.6

2002-01-01

Optics Letters

Abstract:We present the design and fabrication of a planar structure for coupling light from a multimode feed waveguide into a single-line-defect photonic-crystal waveguide. Finite-difference time-domain calculations predict a coupling efficiency of greater than 90%, and preliminary experimental results indicate successful coupling through a single-line-defect photonic-crystal waveguide. Device design, fabrication, and characterization are presented.
High Transmitting and Coupling Characteristics of Light at the Surface of A Photonic Crystal with A Triangular Lattice of Air Holes

Jun Zhang,Tianbao Yu,Nianhua Liu,Jianyi Yang,Qinghua Liao,Xiaoqing Jiang

DOI: https://doi.org/10.1364/josab.29.000748

2012-01-01

Abstract:We investigate and simulate the light transmitting and coupling characteristics of surface mode waveguides (SMWs) based on photonic crystals (PhCs) with a triangular lattice of air holes. We demonstrate that surface waves can be efficiently propagated and served as a new kind of high-efficiency single-SMW-based filter with broad bandwidth in the outer space of PhCs. We also explore the highly efficient coupling of hetero-SMWs constructed by cascading different truncated surfaces. The coupling efficiency is insensitive to the interface position. (C) 2012 Optical Society of America
Efficient Directional Coupler Based on Plasmonic Waveguide for Photonic Integrated Circuits

Qiang Li,Yi Song,Yiting Chen,Min Yan

DOI: https://doi.org/10.1049/cp.2010.1228

2010-01-01

Abstract:Two asymmetric directional couplers, including the dielectric-hybrid plasmonic coupler and the dielectric-metal insulator-metal plasmonic coupler, are investigated. The proposed hybrid coupler features short coupling length, high coupling efficiency and can be integrated into the silicon based platform. The applications of these hybrid couplers include the signal routing between plasmonic waveguides and dielectric waveguides in photonic integrated circuits and efficient excitation of plasmonic modes with conventional dielectric modes. Besides, a symmetric directional coupler based on silver nanowires is also demonstrated.
Optical Performance Of Single-Mode Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Components

hongson chu,erping li,ping bai,ravi s hegde

DOI: https://doi.org/10.1063/1.3437088

IF: 4

2010-01-01

Applied Physics Letters

Abstract:The single mode hybrid dielectric-loaded plasmonic waveguide is presented at the wavelength of 1.55 mu m. We show that this waveguiding structure, consisting of a low-index SiO2-stripe sandwiched between a high-index Si-nanowire and a silver film, achieves both long propagation length and strong field confinement with high power intensity. Components such as 90 degrees-circular and S-shaped bends, based on the proposed waveguide with an intensity confinement area of 50x200 nm(2), can obtain a total transmission efficiency exceeding 85% for various bend radii. Finally, we demonstrate that the efficient directional couplers can be developed using two coupled waveguides. In particular, we determine the typical coupling lengths and maximum transfer power for different structural parameters of the coupler. These investigations provide the foundations for the design of chip-scale integrated plasmonic circuitry. (C) 2010 American Institute of Physics. [doi: 10.1063/1.3437088]
Asymmetric Plasmonic-Dielectric Coupler with Short Coupling Length, High Extinction Ratio, and Low Insertion Loss.

Qiang Li,Yi Song,Gan Zhou,Yikai Su,Min Qiu

DOI: https://doi.org/10.1364/ol.35.003153

IF: 3.6

2010-01-01

Optics Letters

Abstract:Asymmetric directional coupling between a hybrid plasmonic waveguide with subwavelength field confinement and a conventional dielectric waveguide is investigated. The proposed hybrid coupler features short coupling length, high coupling efficiency, high extinction ratio, and low insertion loss; it can also be integrated into a silicon-based platform. This coupler can be potentially adopted for signal routing between plasmonic waveguides and dielectric waveguides in photonic integrated circuits. Furthermore, it can be exploited to efficiently excite hybrid plasmonic modes with conventional dielectric modes.
Robust and Broadband Optical Coupling by Topological Waveguide Arrays

Wange Song,Wenzhao Sun,Chen Chen,Qinghai Song,Shumin Xiao,Shining Zhu,Tao Li

DOI: https://doi.org/10.1002/lpor.201900193

2020-01-13

Abstract:<p>Photonic topological states have been exploited to give rise to robust optical behaviors that are quite insensitive to local defects or perturbations, which provide a promising solution for robust photonic integrations. Specifically, for example, optical coupling between waveguides is a universal function in integrated photonics. However, the coupling performance usually suffers from high structure‐sensitivity and challenges current manufacturing for massive production. Here, the topological edge state in a finite Su–Schriffer–Heeger modeled optical waveguide array is explored and robust optical coupling (e.g., directional coupling and beam splitting) is demonstrated, which is quite insensitive to structural variations. It is experimentally proved that even a large discrepancy (21–26% structural deviation) in silicon waveguides gaps has little influence on optical coupling (>90% performance), while conventional counterparts totally break down. Moreover, thanks to such a topological design, the devices show much broader working bandwidth (≈10 times performance improvement) than the conventional ones, greatly favoring the photonic integrations. This work would inspire new families of optical devices with robust and broadband properties that can excite more interesting and useful exploration in both fields, and possibly open a new avenue toward topological devices with unique properties and functionalities.</p>

physics, condensed matter,optics, applied
Actively tunable weak and strong couplings in epsilon-near-zero ultrathin film-based Weyl semimetallic photonic crystals

Mengran Sun,Liming Qian,Jingfei Ye,Gaige Zheng

DOI: https://doi.org/10.1088/2040-8986/acb8c8

IF: 2.1

2023-02-05

Journal of Optics

Abstract:Lithography-free layered dielectric media play an important role in photonic platforms and open up new possibilities in the design of devices with large-scale compatibilities. In this work, we propose a hybrid structure consisting of phononic thin layer and Weyl semimetallic photonic crystals (WSMPhCs). Manipulation of electromagnetic (EM) waves and the interactions between different optical modes are presented, which is highly demanded for both fundamental research and practical applications. The weak and strong coupling effects result in hybrid polariton modes, of which the dispersion can be quantitatively described by a coupled harmonic oscillator (CHO) model. In the Kretschmann coupling proposal, when the incident angle is smaller than the critical angle ( =25 ) of total internal reflection, a weak coupling is generated. However, when the incident angle is larger than , anticrossing resluts from strong coupling can be observed. We believe that the use of easily manufactured WSM elements and the tunable hybridization of multiple optical modes will enable the manipulation of light-matter interactions with more flexibility in the mid-infrared (MIR) range, and can significantly improve the functional properties of various devices.

optics
Terahertz metallic photonic crystals integrated with dielectric waveguides

Dejun Liu,Lin Chen,Feng Liu

DOI: https://doi.org/10.48550/arXiv.2003.00190

2020-02-29

Abstract:Compact and low-loss photonic crystal waveguides are critical in integrated terahertz (THz) applications. Compared with pure metal or dielectric photonic crystal waveguides, hybrid (metal-dielectric) integrated waveguides provide a simple way to further improve the field confinement and the propagation loss. In this work, we investigate a hybrid waveguide consisting of metallic photonic crystals and dielectric films in 0.1-1.0 THz. Photonic crystal waveguides based on metal pillar arrays (MPAs) support two resonance modes including the fundamental and high-order transverse magnetic (TM) modes and then form one apparent bandgap in 0.45-0.55 THz. The high-order TM-mode shows higher confinement than the fundamental mode and are thus sensitive to the dielectric film on the MPAs. The propagation loss and field confinement can be optimized by changing the dielectric film thickness and refractive index. The investigation shows that the lowest loss occurs at 0.68 THz because the high-order TM-mode THz waves are tightly confined inside the hybrid waveguide. This work proves that such hybrid waveguides based on metallic photonic crystals are promising to develop as a compact integrated terahertz device.

Optics
Hybrid unidirectional meta-coupler for vertical incidence to a high-refractive-index waveguide in telecom wavelength.

Chensheng Gong,Jianhao Zhang,Sailing He

DOI: https://doi.org/10.1364/OL.42.005098

IF: 3.6

2017-01-01

Optics Letters

Abstract:Unidirectional optical manipulation, especially the coupling from a vertical light beam to a waveguide unidirectionally, is desirable in photonic integration. We first propose a hybrid unidirectional meta-coupler for vertical incidence to a high-refractive-index waveguide in telecom wavelength, a periodic plasmonic metasurface composed of metal-insulator-metal unit cells is used for phase matching. Three designs are given for devices working around wavelengths 0.85, 1.31, and 1.55 mu m. The simulated coupling efficiencies are all around 70%, and the 1 dB coupling bandwidths are 29, 82, and 105 nm, respectively. Our approach paves the way for the applications of optical metasurfaces to planar lightwave circuits. (C) 2017 Optical Society of America
Low-loss Hybrid Plasmonic Modes Guided by Metal-Coated Dielectric Wedges for Subwavelength Light Confinement.

Yusheng Bian,Qihuang Gong

DOI: https://doi.org/10.1364/ao.52.005733

IF: 1.9

2013-01-01

Applied Optics

Abstract:The optical characteristics of a metal-coated dielectric wedge structure are investigated at a wavelength of 1550 nm. The effects of the metal/gap layers' thicknesses, as well as the dimension of the dielectric wedge on the guided modes' properties, are systematically analyzed. It is revealed that the characteristics of the fundamental quasi-TE and quasi-TM plasmonic modes supported by the configuration demonstrate similar trends against the variation of the metal layer thickness while exhibiting quite different behaviors with the change of the wedge size. By choosing appropriate physical dimensions, both modes could simultaneously achieve low modal loss and subwavelength field confinement, along with reasonable mode power inside the low-index gap region. Investigations on the directional coupling between adjacent identical waveguides indicate that ultralow crosstalk can be enabled by the quasi-TE mode, with the coupling length more than two orders of magnitude larger than that achieved by the plasmonic mode in conventional hybrid counterparts. The presented metal-coated dielectric wedge structures can be employed as important building blocks for a number of integrated nanophotonic components, and could also enable numerous applications at the subwavelength scale.
Photonic Crystal Fiber Metalens

Jingyi Yang,Indra Ghimire,Pin Chieh Wu,Sudip Gurung,Catherine Arndt,Din Ping Tsai,Ho Wai Howard Lee

DOI: https://doi.org/10.1515/nanoph-2018-0204

2019-03-27

Abstract:Optical fiber is a well-established efficient way to guide and manipulate light and allowing high bandwidth optical transmission for long distance communication with low attenuation. Although a dielectric optical waveguide is efficient for transmitting light, its functionality is limited by the dielectric properties of the materials of core and <a class="link-external link-http" href="http://cladding.The" rel="external noopener nofollow">this http URL</a> light coming out from optical fiber is typically diverging, and the numerical aperture is determined by the refractive index of the fiber materials. Thus, the light intensity decreases significantly upon exiting the fiber. The use of metasurfaces provides the opportunity to tailor light properties for advanced light manipulation and to develop novel optical applications that are flat. By producing a specific phase profile using spatially-varied nano-antenna elements, metasurfaces can control the wavefront of the transmitted, reflected, and scattered light, and enable novel ultrathin optical components such as flat lenses. Here, we report an ultrathin optical metalens cascaded on the facet of optical fiber that enables light focusing in the telecommunication regime. In-fiber metalenses with focal lengths of 28 and 40 um and maximum efficiency of ~16.4% at a wavelength of 1550 nm are demonstrated. The integration of an ultrathin metalens and optical fiber will open the path to revolutionary in-fiber optical devices for practical applications in optical imaging, sensing, and fiber laser.

Optics
Efficient Meta-couplers Squeezing Propagating Light into On-Chip Subwavelength Devices in a Controllable Way

Yizhen Chen,Xiaoying Zheng,Xiyue Zhang,Weikang Pan,Zhuo Wang,Shiqing Li,Shaohua Dong,Feifei Liu,Qiong He,Lei Zhou,Shulin Sun

DOI: https://doi.org/10.1021/acs.nanolett.3c00310

IF: 10.8

2023-04-09

Nano Letters

Abstract:On-chip photonic systems play crucial roles in nanoscience and nanoapplications, but coupling external light to these subwavelength devices is challenging due to a large mode mismatch. Here, we establish a new scheme for realizing highly miniaturized couplers for efficiently exciting on-chip photonic devices in a controllable way. Relying on both resonant and Pancharatnam-Berry mechanisms, our meta-device can couple circularly polarized light to a surface plasmon, which is then focused into a...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Robust Light Coupling to Photonic Crystal Waveguide Using Integrated Metalens

Subwavelength-Confined Hybrid Surface Modes of Low Attenuation in Cylindrical Metallic-Dielectric Waveguides

Ring Resonator of Hollow-Core Photonic Crystal Fiber Based on Spatial Coupling Scheme

Engineering the light coupling between metalens and photonic crystal resonators for robust on-chip microsystems

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Efficient Waveguide Coupler Based on Metal Materials

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Optomechanical coupling in photonic crystal supported nanomechanical waveguides

Structurally-tolerant Vertical Directional Coupling Between Metal-Insulator-metal Plasmonic Waveguide and Silicon Dielectric Waveguide

High-efficiency Coupling Structure for a Single-Line-defect Photonic-Crystal Waveguide.

High Transmitting and Coupling Characteristics of Light at the Surface of A Photonic Crystal with A Triangular Lattice of Air Holes

Efficient Directional Coupler Based on Plasmonic Waveguide for Photonic Integrated Circuits

Optical Performance Of Single-Mode Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Components

Asymmetric Plasmonic-Dielectric Coupler with Short Coupling Length, High Extinction Ratio, and Low Insertion Loss.

Robust and Broadband Optical Coupling by Topological Waveguide Arrays

Actively tunable weak and strong couplings in epsilon-near-zero ultrathin film-based Weyl semimetallic photonic crystals

Terahertz metallic photonic crystals integrated with dielectric waveguides

Hybrid unidirectional meta-coupler for vertical incidence to a high-refractive-index waveguide in telecom wavelength.

Low-loss Hybrid Plasmonic Modes Guided by Metal-Coated Dielectric Wedges for Subwavelength Light Confinement.

Photonic Crystal Fiber Metalens

Efficient Meta-couplers Squeezing Propagating Light into On-Chip Subwavelength Devices in a Controllable Way