Abstract:In order to ensure that dual-axis rotational inertial navigation systems (RINSs) maintain a high level of accuracy over the long term, there is a demand for periodic calibration during their service life. Traditional calibration methods for inertial measurement units (IMUs) involve removing the IMU from the equipment, which is a laborious and time-consuming process. Reinstalling the IMU after calibration may introduce new installation errors. This paper focuses on dual-axis rotational inertial navigation systems and presents a system-level self-calibration method based on invariant errors, enabling high-precision automated calibration without the need for equipment disassembly. First, navigation parameter errors in the inertial frame are expressed as invariant errors. This allows the corresponding error models to estimate initial attitude even more rapidly and accurately in cases of extreme misalignment, eliminating the need for coarse alignment. Next, by utilizing the output of a gimbal mechanism, angular velocity constraint equations are established, and the backtracking navigation is introduced to reuse sensor data, thereby reducing the calibration time. Finally, a rotation scheme for the IMU is designed to ensure that all errors are observable. The observability of the system is analyzed based on a piecewise constant system method and singular value decomposition (SVD) observability analysis. The simulation and experimental results demonstrate that this method can effectively estimate IMU errors and installation errors related to the rotation axis within 12 min, and the estimated error is less than 4%. After using this method to compensate for the calibration error, the velocity and position accuracies of a RINS are significantly improved.

A New Systematic Calibration Method for SINS

An Improved Fast Self-Calibration Method for Hybrid Inertial Navigation System under Stationary Condition

A Decoupling Three-Position Calibration Method Based on Observability Analysis for SINS/CNS Integrated Navigation

A New Norm-Observed Calibration Method Based on Improved Differential Evolution Algorithm for SINS

All-Parameter System-Level Calibration for SINS/CNS based on global observability analysis

A Parameter Self-Calibration Method for GNSS/INS Deeply Coupled Navigation Systems in Highly Dynamic Environments

Simultaneous Intrinsic And Extrinsic Calibration Of A Visual-Odometric Sensor System

Calibration for Strapdown Micro Inertial Navigation System

Calibration method of strapdown inertial measurement unit based on two-axis turntable

A Robust Online Calibration Method for SINS/LDV Integrated Navigation System Based on Position Observation

A Fast Self-Calibration Method for Dual-Axis Rotational Inertial Navigation Systems Based on Invariant Errors

A Novel Network Calibration Method for Inertial Measurement Units

A Systematic Calibration Modeling Method for Redundant INS with Multi-Sensors Non-Orthogonal Configuration

A Calibration Method for Misalignment Angle of Vehicle-mounted IMU

A self-calibration method in single-axis rotational inertial navigation system with rotating mechanism

A System-Level Self-Calibration Method for Installation Errors in A Dual-Axis Rotational Inertial Navigation System

Research on Innovative Self-Calibration Strategy for Error Parameters of Dual-Axis RINS

Extrinsic Parameter Calibration Method for a Visual/Inertial Integrated System with a Predefined Mechanical Interface

An On-Line Full-Parameters Calibration Method for SINS/DVL Integrated Navigation System

Research on Calibration of SINS by Kalman Filter

Accelerometer Bias and Star Sensor Installation Error Joint Calibration for the SINS/CNS Integrated Navigation System Using Attitude Maneuver