Abstract:Lithium is a vital aspect of the strategic development of the alternative energy and nuclear industries, and the demand for this metal is currently increasing rapidly. China possesses significant lithium resources, nearly 80 % of which are situated in salt lake brine. Solvent extraction is a viable means of extracting lithium ions from brine that has high magnesium-to-lithium ratio, and provides high selectivity along with ready scale-up to industrial production levels. The most common extraction technology for such scenarios is the tributyl phosphate (TBP)-FeCl3-kerosene system. However, this system tends to lose Fe3+ during the extraction process and the concurrent use of acid and alkali can seriously affect the stability of the organic phase. The present work demonstrates a new extraction process employing TBP as the main extractant, sodium tetraphenyl boron as a co-extractant and phenethyl isobutyrate as a diluent. Optimization of the relative amounts of these components along with the phase ratio provided a single-stage lithium ion extraction efficiency of 85.70 % together with a separation factor of lithium to magnesium ions of 1175. The organic phase was washed with a LiCl + NaCl solution to remove impurity ions then stripped five times with a NaHCO3 solution, with a Li+ stripping efficiency >99 %. During ten replicate extractions, the Li+ extraction efficiency remained stable at approximately 84 %, demonstrating good stability. NMR spectra verified that the binding strength of metal cations to TBP decreased in the order of Li+ > Na+ ≫ Mg2+, indicating selectivity for the extraction of Li+. This single step NaHCO3 method was adopted to simplify the extraction process. The overall strategy avoids the use of strong acids or bases that otherwise corrode equipment and provides greatly improved long-term stability of the organic phase.

Boron extraction from lithium-rich brine using mixed alcohols

Progress in Extractants for Boron Recovery from Salt-Lake Brine

Boron extraction by aliphatic mono- and di-hydroxy alcohols from a representative continental brine

Extraction of boron from salt lake brine using 2-ethylhexanol

Extraction of Lithium from Brine with Neutral Organophosphorous Solvents

Selective extraction of lithium ions from salt lake brines using a tributyl phosphate-sodium tetraphenyl boron-phenethyl isobutyrate system

Efficient Step-by-Step Desorption to Reduce Boron in Brine Lithium Extraction

A rational strategy for synchronous extraction of lithium and boron from salt lake brines

Extraction of lithium from salt lake brine containing boron using multistage centrifuge extractors

Extraction of lithium from salt lake brine containing borate anion and high concentration of magnesium

Simultaneous Recovery of Lithium and Boron from Brine by the Collaborative Adsorption of Lithium-Ion Sieves and Boron Chelating Resins

Equilibrium Behavior of Boric Acid Extracted by Aliphatic 1,3-Diols

Solvent extraction of lithium from brines with high magnesium/lithium ratios: investigation on parameter interactions

Selective Lithium Recovery from Lithium Precipitation Mother Liquor by Using a Diketone-Based Solvent

Liquid–liquid extraction of boron from continental brines by 2-butyl-1-octanol diluted in kerosene

Boron Recovery from Organic Solutions Used in Brine Treatment through a Water Stream

Recovery of boron from brines with high magnesium content by solvent extraction using aliphatic alcohol

A Study on the Coupling of Li+ and H3BO3 Extraction and Their Mutual Promotion Mechanism

Extraction of Lithium from Salt Lake Brine and Mechanism Research

Extraction of Lithium from Salt Lake Brine with Tributyl Phosphate and an Ionic Liquid

Lithium Extraction from Carbonate-Rich Salt Lake Brine Using HBTA/TBP System