Abstract:Due to the increasing demands for lightweight parts in various fields, such as bicycle, automotive, aircraft and aerospace industries, hydroforming processes have become popular in recent years. Since tubular materials during tube hydroforming are under a bi-axial even tri-axial stress state, which is different from that in the tensile test, it is necessary to test the mechanical properties of the material under bi-axial stress state. Tube bulging test is an advanced method for characterizing the mechanical properties of tubular materials under bi-axial stress state. But there are excessive physical quantities in the theoretical model of tube bulging test for testing the mechanical properties of tubes under bi-axial stress state which are difficult to be obtained during the experiment. In order to solve the problems, a method for directly testing the mechanical properties of tubes under bi-axial stress state was proposed in this work, which will be referred to as "one point method". Because of circular model is characterized by a dominant function expression, theoretical models of both the pole axial curvature radius and the pole thickness during bulging test are derived under supposing the geometrical models for bulging zone as circular. Thus, the mechanical properties of tubes under bi-axial stress state can be obtained only through measuring the bulging height at the pole point during the bulging test, which laid the foundation for the establishment of a simple and reliable method for testing the mechanical properties of the tube online. Based on the above proposed method, the extruded aluminum alloy tubes AA6061 were tested. The results showed that both the pole axial curvature radius and the pole thickness during bulging test can be expressed as display functions pertaining to the bulging height at the pole point. For the theoretical model of the pole axial curvature radius, as the bulging rate increases, the prediction accuracy increases at beginning, and decreases at the end when using circular as the theoretical geometrical models for bulging zone. The prediction accuracy is the highest as the bulging rate is about 13%, the prediction accuracy decreases after the bulging rate is more than 20%. Fortunately, the overall prediction error is small. The maximum error does not exceed +/-0.9%. The prediction accuracy of the pole thickness using the theoretical model is almost unaffected by the specimen geometry. When the ratios of length to diameter and diameter to thickness change, the difference is very small, the prediction error is not more than 0.8%. This is very helpful to ensure the accuracy of mechanical testing under bi-axial loading conditions. Using the "one point method", the stress and strain components along the circumferential and axial directions can be simultaneously measured, this laid the foundation for further analysis of the anisotropic property impacting on the flow and subsequent yield under complex stress state.

Investigation on Influence of Mandrel Shape on Shear Stress in Pure Shearing Test of Thin-Walled Aluminum Alloy Tubes

Optimizing Pure Shear Experiment to Properly Characterize the Shear Properties of Thin-Walled Aluminum Alloy Tubes

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Investigation on the influence of mandrel on the forming quality of thin-walled tube during free bending process

In-situ EBSD Observation of Texture Evolution and Lattice Rotation Behavior in Shear Deformation of Thin-Walled Aluminum Alloy Tubes

Experimental Verification of the Influence of Normal Stress on the Formability of Thin-Walled 5a02 Aluminum Alloy Tubes

Shear Hydro-Bending of 5a02 Aluminum Alloys Rectangular Tubes

Investigation on Thermo-Mechanical Behaviors of Shape Memory Thin-Walled Tube

Experimental investigations on extruded 6063 aluminium alloy tubes under complex tension-compression stress states

Influence of Tube Ends Constraint on Hydro-Bending of Thin-Walled Aluminum Tube

Investigation into Wrinkling Behavior of Thin-Walled 5a02 Aluminum Alloy Tubes under Internal and External Pressure

A New Method for Directly Testing the Mechanical Properties of Anisotropic Materials in Bi-Axial Stress State by Tube Bulging Test

Analysis of Bending Deformation and Stress of 6063-T5 Aluminum Alloy Multi-Cavity Tube Filled with Liquid

Identification of Anisotropic Coefficients in the Non-Principal Axis Directions of Tubular Materials Using Hole Bulging Test

Influence of Internal Pressure on Hydro-Bending of Thin-Walled Aluminum Alloy Tube

A new mandrel design with mandrel ball thickness variation for the bending process of aviation ultra-thin-walled tubes

Experimental and Numerical Investigation on Axial Hydro-Forging Sequence of 6063 Aluminum Alloy Tube

Study on the Influence of Mandrel Type on Copper Tube Rotary Draw Bending

Comparison of Critical Shear Strain Evaluations for Simple Shear Test

Push-bending Process of Stainless-Steel Tubes: Experiment and Simulation

Effect of Internal Pressure on Corner Radius and Thickness Distribution of Shear Hydro-Bending of 5a02 Aluminum Alloy Tube