Abstract:CO2 storage in deep geological structures is considered to be a promising method for the mitigation of CO2 emission. Estimation of the capacity of a geological reservoir is of great importance. Core level study of CO2 storage mechanism and estimation of CO2 storage capacity at laboratory scale have shown to be great helpful for CO2 geological storage studies.This paper is proposed against the background of long term and safe storage of CO2 in deep saline aquifers. Experiments for CO2 storage in glass beads bed were inducted at laboratory scale. Quartz beads were filled and packed tightly in the imaging vessel. Gaseous CO2 was then injected into the sample at a constant flow rate and saturated water was driven out. Two CO2 injection directions in the vessel were chose, namely upwards and downwards to observe the effect of buoyancy. Three dimensional scans were carried out using a micro focus X-ray CT system to investigate the distribution of CO2 in sandstone cores.Digital cores of those samples were obtained after a series of imaging processing of media filtering, rescaling, and thresholding. Then a maximal ball (MB) algorithm was used to extract the equivalent pore networks. The parameters of the pore networks, such as coordination number, size distributions and shape factors of pore and throat were computed. Gas channeling phenomena was obviously found in water saturated beads bed while CO2 was injected upwards during displacement experiments. A short breakthrough time resulted in low sweep coefficient and only about 10% of saturated water was displaced. Nevertheless, about 80% of saturated water could be driven out and displaced by CO2 while it was injected downwards. Storage capacity of residual trapping was enhanced while CO2 was injected downwards along the beads bed. X-ray micro CT was proved to be an effective technique for the investigation of CO2 storage in core sample and a novel method for the estimation of CO2 storage capacity. (c) 2013 The Authors. Published by Elsevier Ltd.

Application of computed tomography (CT) in geologic CO<sub>2</sub> utilization and storage research: A critical review

Application of computed tomography (CT) in geologic CO2 utilization and storage research: A critical review

Application of Computerized Tomography on Geotechnical Engineering Study

Application and Development of CT Scanning Technology in Coal Sector

Ct Technique And Its Applications In Engineering Geology

Application of X-ray Computed Tomography in Natural Gas Hydrate Research

The Applications of Industrial CT NDT Technology in Geological Research

Applications of Computed Tomography (CT) in Environmental Soil and Plant Sciences

Application of CT Technology in Petroleum Exploration and Development

Application of Automated Mineralogy in Petroleum Geology and Development and CO2 Sequestration: A Review

A review of high-resolution X-ray computed tomography applied to petroleum geology and a case study

Detailed Description of Hancheng Coal Reservoirs Based on the X-CT Technology

Application of X‐Ray Computed Tomography Technology in Gas Hydrate

A Visualization Study On The Influence Of Flow Rates And Pore Structure On Co2 Saturation In Porous Media

Application of nuclear magnetic resonance technology to carbon capture, utilization and storage: A review

Review of application of molecular dynamics simulations in geological sequestration of carbon dioxide

Application of X-ray CT investigation of CO 2 –brine flow in porous media

Estimation of CO2 Storage Capacity in Porous Media by Using X-ray Micro-Ct

Application of X-ray CT in the research of geotechnical materials microstructure

Determination of Swelling Effect in Co2-Brine Systems Using Microfocus X-Ray Ct

THE APPLICATION OF INDUSTRIAL COMPUTATION TOMOGRAPHY (CT) TO THE ANALYSIS OF CORE SAMPLE POROSITY