Abstract:Latent heat thermal energy storage (LHTES) systems based on phase change materials (PCMs) offer a reliable way to address the intermittency of renewable energy sources. The low thermal conductivity of PCMs, however, limits the practical use of LHTES systems. This work aims to investigate the effect of mixing graphene (Gr) and copper (Cu) nanoparticles at volume fractions varying from 0 % to 5 % with a PCM on the single charging/discharging performance of a cascaded packed bed LHTES system. The effect of the charge inlet temperature on the cyclic performance is also investigated by considering three cascaded configurations with encapsulated copper-nanoparticle-enhanced PCMs (Cu-NEPCMs) and six inlet temperatures ranging from 390 °C to 440 °C. A concentric-dispersion numerical model is developed to evaluate thermal performance. Synthetic PCMs with melting temperatures in the range of 320°C–380 °C are adopted as the heat storage medium, and molten salt is used as the heat transfer fluid. As the volume fraction of the Cu and Gr nanoparticles increases from 0 % to 5 %, the cascaded Cu-NEPCM and Gr-NEPCM storage systems exhibit decreases in the melting time by 14.4 % and 5.6 % and in the solidification time by 13.9 % and 6.5 %, respectively. As the inlet temperature increases from 390 °C to 440 °C, the optimal cascaded packed bed configuration among the three shows enhancements in the total energy storage in the bed, energy recovered by the salt from the bed, capacity ratio, and total utilization ratio by 82.2 %, 85.6 %, 20.3 %, and 50.5 %, respectively. This work provides insights into the design and operation of LHTES systems with enhanced performance.

Thermodynamic Investigation of Cascaded Latent Heat Storage System Based on a Dynamic Heat Transfer Model and DE Algorithm

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Thermodynamic Analysis and Improvement of Cascaded Latent Heat Storage System Using Temperature-Enthalpy Diagram

Thermodynamic Analysis and Optimization of Cascaded Latent Heat Storage System for Energy Efficient Utilization

Thermal Performance of Cascaded Thermal Storage with Phase-Change Materials (pcms). Part I: Steady Cases

Thermal performance analysis and optimization of cascaded packed bed latent heat storage tank

Experimental Study on the Thermodynamic Performance of Cascaded Latent Heat Storage in the Heat Charging Process

Thermal Performance Analysis of Latent Heat Thermal Energy Storage with Cascaded Phase Change Materials Capsules under Varying Inlet Temperature

An experimental investigation on the heat transfer characteristics of cascaded thermal storage units based on multichannel flat tubes

Thermal Efficiency Analysis of the Cascaded Latent Heat/Cold Storage with Multi-Stage Heat Engine Model

Performance Study of Phase Change Charging/discharging Processes of Condensing Heat Storage in Cold Regions Based on a Mathematical Model

CFD Analysis of Latent Heat Energy Storage System with Different Geometric Configurations and Flow Conditions

Studies on performance enhancement of heat storage system with multiple phase change materials

Experimental study on thermophysical parameters of a solar assisted cascaded latent heat thermal energy storage (CLHTES) system

Thermal Performance Analysis and Optimization of Multiple Stage Latent Heat Storage Unit Based on Entransy Theory

Thermodynamic performance of cascaded latent heat storage systems for building heating

A critical review on phase change material energy storage systems with cascaded configurations

Multi-objective Optimization of a Latent Thermal Energy Storage Unit with Compound Enhancement Method

Numerical Study on the Performance of Shell-and-tube Thermal Energy Storage Using Multiple PCMs and Gradient Copper Foam

Performance investigation on the cascaded packed bed thermal energy storage system with encapsulated nano-enhanced phase change materials for high-temperature applications

STUDY ON THE CHARACTERISTICS OF CASCADE HEAT STORAGE BASED ON SERIES COMPOSITE PHASE CHANGE MATERIALS