Abstract:Investigation of the hydro-mechanical effects on gas migration in saturated materials with low permeability is of great theoretical and practical significances in many engineering fields. The conventional two-phase flow (visco-capillary flow) theory, which regards the capillary pressure as the only controlling factor in gas migration processes, is commonly adopted to describe the gas flow in geo-materials. However, for materials with low permeability, the conventional two-phase flow theory cannot properly describe the gas migration. In this work, hydro-mechanical coupled gas injection tests were conducted. The volumetric variation of the liquid for applying the confining pressure in the specimen cell and the gas flow rate were monitored. Test results indicate that gas migration is influenced by the capillary pressure and the mechanical stress simultaneously. The two key parameters of the gas entry pressure Pentry and the gas induced-dilatancy pressure Pdilatancy are introduced for description of gas migration with respect to the capillary pressure and the mechanical stress effects, respectively. When the gas injection pressure is smaller than the Pentry and the Pdilatancy, the balance between the gas injection pressure and the confining pressure will lead to an intermittent gas flow. Sudden increase of gas flow rate could be observed once the gas injection pressure approaches the Pentry or the Pdilatancy. For higher gas injection pressures, the mechanical stress effects on gas migration could not be neglected. The sudden increase of gas flux under high gas injection pressures could be caused by the mechanical induced-dilatancy of channels, capillary pressure induced-continuous flow pathways, as well as the failure of sealing-efficiency. The failure of sealing-efficiency is closely related to the difference between the gas injection pressure and the confining pressure rather than the properties of the material tested. Monitoring the volume of liquid for applying confining pressure is helpful for detecting the failure of sealing efficiency and the mechanism of gas breakthrough.

INVERSE ANALYSIS TO OBTAIN THE PRESSURE-DEPENDENT PERMEABILITY OF MICRO/NANO POROUS MATERIALS

Inverse analysis on permeability of micro-nano porous materials based on two-dimensional seepage equation

Transient Experiment on the Permeability of Micro-nano Porous Materials

Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials

Inversion Calculation of Permeability Coefficient with the Multi-Scale Asymptotic Expansion Method

Study of Pressure Drop-Flow Rate and Flow Resistance Characteristics of Heated Porous Materials under Local Thermal Non-Equilibrium Conditions

Comparing the Permeability Calculation Between Different System Size of the Computational Gas Diffusion Layer Sample in PEMFC

Determination of the Anisotropic Permeability of a Carbon Cloth Gas Diffusion Layer Through X‐ray Computer Micro‐tomography and Single‐phase Lattice Boltzmann Simulation

Investigation of the Effect of the Gas Permeation Induced by Pressure Gradient on Transient Heat Transfer in Silica Aerogel

Investigation on Gas Migration in Saturated Materials with Low Permeability

Apparent Permeability Study of Rarefied Gas Transport Properties Through Ultra-Tight VORONOI Porous Media by Discrete Velocity Method

Characterization of the average pore diameter of nanoporous media by gas permeability measurement technique in transitional flow regime

Pore-scale simulation of flow and mass transfer characteristics of porous particle

Gas transport in fibrous media: Application to in-plane permeability measurement using transient flow

Intrinsic permeability of heterogeneous porous media

Numerical Study of Gas Flow in Super Nanoporous Materials Using the Direct Simulation Monte-Carlo Method

Prediction of the Permeability of Fibrous Porous Structures under the Full Flow Regimes

Improved Method for Measuring the Permeability of Nanoporous Material and Its Application to Shale Matrix with Ultra-Low Permeability.

Accurate measurement of micro gas flow rates for comprehensive evaluation of polymeric membranes applicable in gaseous separations

The direct Monte Carlo simulation of microchannel flows for a large Knudsen number range