Autonomous navigation and environment modeling for MAVs in 3-D enclosed industrial environments

LiQing,LiDa-Chuan,WuQin-Fan,TangLiang-Wen,HuoYan,ZhangYi-Xuan,ChengNong

IF: 10

2013-01-01

Computers in Industry

Abstract:In many applications, the industrial environments are typically 3-D indoor spaces enclosed by shell style structures, which are highly complex with known or unknown non-convex obstacles. GPS signal...

What problem does this paper attempt to address?

Autonomous navigation and environment modeling for MAVs in 3-D enclosed industrial environments

Qing Li,Da-Chuan Li,Qin-fan Wu,Liang-wen Tang,Yan Huo,Yi-xuan Zhang,Nong Cheng

DOI: https://doi.org/10.1016/j.compind.2013.06.010

IF: 10

2013-01-01

Computers in Industry

Abstract:In many applications, the industrial environments are typically 3-D indoor spaces enclosed by shell style structures, which are highly complex with known or unknown non-convex obstacles. GPS signal is unreliable or even unavailable inside, which poses significant technical challenges for the state estimation of micro aerial vehicles (MAVs) performing exploration and modeling tasks in such environments. In this paper, requirements and challenges for 3-D enclosed industrial environments exploration are analyzed firstly, and then state-of-art developments of MAV systems, environment modeling, visual navigation and guidance technologies are reviewed. A robust RGB-D odometry is introduced into the system to provide airborne 6-DOF state estimates of the MAV, which are fused with inertial measurements. Then the fused state information is used to assist the RGB-D based real time 3-D environment modeling. An improved closed-loop RRT based path planning approach (BI-RRT) is developed for information-efficient environment explorations. A flight experimental platform is constructed and the proposed system is validated in flight experiments.
3D Map Building for Mobile Robot under Unknown Outdoor Environments

SUN Yu,XIANG Zhi-yu,LIU Ji-lin

DOI: https://doi.org/10.3785/j.issn.1008-973x.2007.12.001

2007-01-01

Abstract:Considering the drawback of the traditional iterative closest point(ICP) algorithm and the characteristics of the outdoor environment,a more effective ICP algorithm which is able to avoid the local minimum problem was presented for 3D map building under unknown outdoor environment.A new online multiview registration method and an offline registration method were proposed to resolve the problem of accumulative error.Finally by using a 3D laser radar and a mobile robot,an outdoor 3D map,which was necessary for the positioning and navigation of the mobile robot,was constructed successfully.The experimental results show that the method is fast,precise,robust and applicable to the complex and large outdoor environment.
Active Planning of Robot Navigation for 3D Scene Exploration

Wenzhou Chen,Yong Liu

DOI: https://doi.org/10.1109/aim.2018.8452299

2018-01-01

Abstract:This work addresses the active planning of robot navigation tasks for 3D scene exploration. 3D scene exploration is an old and difficult task in robotics. In this paper, we present a strategy to guide a mobile autonomous robot equipped with a camera in order to autonomously explore the unknown 3D scene. By merging the particle filter into 3D scene exploration, we address the robot navigation problem in a heuristic way, and generate a sequence of camera poses to coverage the unknown 3D scene. First, we randomly generate a bunch of potential camera pose vectors. Then, we select the vectors through our criteria. After determining the first camera pose vector, we generate the next group of vectors based on the former one. We select the new camera pose vector and thereafter. We verify the algorithm theoretically and show the good performance in the simulation environment.
3-D Map Reconstruction in Cross-country Environment

YU Chun-he,LIU Ji-lin

DOI: https://doi.org/10.3969/j.issn.1005-9830.2007.02.011

2007-01-01

Abstract:In order to build a precise 3-D map of outdoor environment,a novel map reconstruction algorithm is proposed based on a mobile robot.The robot uses a four-layer laser radar(LD-ML) to obtain space information and uses a DGPS/INS(Difference GPS/ Inertial Navigation System) position system to obtain its pose and position information.With the aim of building a complete 3-D grid map,the range data of environment are changed into a world coordinate system with the simultaneous position data of the robot.Since the outdoor environment is always complicated,the 3-D grid map is built by updating z-coordinate value using obstacle detection results.And the obstacle detection is achieved by LD-ML according to the gradient and height information of detection regions.The results of 3-D grip map reconstruction show the 3-D map reconstruction algorithm is reliable and stable.
Binocular Stereo Vision Based 3D Mapping for Micro Aerial Vehicles in an Indoor Environment

Xiaohuan YU,Bo HAN,Yu ZHANG,Ping LI

DOI: https://doi.org/10.13976/j.cnki.xk.2014.0392

2014-01-01

Abstract:In order to meet the demands of obstacle avoidance and path planning for micro aerial vehicle( MAV) in an indoor environment,we establish a low cost embedded binocular stereo vision platform based on a BeagleBoard-xM board and consumer-grade cameras. With the indoor environment information obtained through the binocular stereo vision system,based on a 3D space description model-octree and an inverse sensor model and combined with the attitude information of the MAV,we propose a 3D map-building method described with a 3D occupancy map. The result of the experiment shows that the 3D occupancy map acquired by embedded binocular stereo vision system described the indoor environment of MAV accurately and effectively.It can thus be used widely in unmanned aerial vehicle navigation in an indoor environment.
Visual Odometry and 3D Mapping in Indoor Environments

Qinfan Wu,Qing Li,Nong Cheng

DOI: https://doi.org/10.4028/www.scientific.net/amm.336-338.348

2013-01-01

Applied Mechanics and Materials

Abstract:This paper presents a robust state estimation and 3D environment modeling approach that enables Micro Aerial Vehicle (MAV) operating in challenging GPS-denied indoor environments. A fast, accurate and robust approach to visual odometry is developed based on Microsoft Kinect. Discriminative features are extracted from RGB images and matched across consecutive frames. A robust least-square estimator is applied to get relative motion estimation. All computation is performed in real-time, which provides high frequency of 6 degree-of-freedom state estimation. A detailed 3D map of an indoor environment is also constructed.
Advanced 3D Navigation System for AGV in Complex Smart Factory Environments

Yiduo Li,Debao Wang,Qipeng Li,Guangtao Cheng,Zhuoran Li,Peiqing Li

DOI: https://doi.org/10.3390/electronics13010130

IF: 2.9

2023-12-29

Electronics

Abstract:The advancement of Industry 4.0 has significantly propelled the widespread application of automated guided vehicle (AGV) systems within smart factories. As the structural diversity and complexity of smart factories escalate, the conventional two-dimensional plan-based navigation systems with fixed routes have become inadequate. Addressing this challenge, we devised a novel mobile robot navigation system encompassing foundational control, map construction positioning, and autonomous navigation functionalities. Initially, employing point cloud matching algorithms facilitated the construction of a three-dimensional point cloud map within indoor environments, subsequently converted into a navigational two-dimensional grid map. Simultaneously, the utilization of a multi-threaded normal distribution transform (NDT) algorithm enabled precise robot localization in three-dimensional settings. Leveraging grid maps and the robot's inherent localization data, the A* algorithm was utilized for global path planning. Moreover, building upon the global path, the timed elastic band (TEB) algorithm was employed to establish a kinematic model, crucial for local obstacle avoidance planning. This research substantiated its findings through simulated experiments and real vehicle deployments: Mobile robots scanned environmental data via laser radar and constructing point clouds and grid maps. This facilitated centimeter-level localization and successful circumvention of static obstacles, while simultaneously charting optimal paths to bypass dynamic hindrances. The devised navigation system demonstrated commendable autonomous navigation capabilities. Experimental evidence showcased satisfactory accuracy in practical applications, with positioning errors of 3.6 cm along the x-axis, 3.3 cm along the y-axis, and 4.3° in orientation. This innovation stands to substantially alleviate the low navigation precision and sluggishness encountered by AGV vehicles within intricate smart factory environments, promising a favorable prospect for practical applications.

engineering, electrical & electronic,computer science, information systems,physics, applied
Developing Smart MAVs for Autonomous Inspection in GPS-denied Constructions

Paoqiang Pan,Kewei Hu,Xiao Huang,Wei Ying,Xiaoxuan Xie,Yue Ma,Naizhong Zhang,Hanwen Kang

2024-08-12

Abstract:Smart Micro Aerial Vehicles (MAVs) have transformed infrastructure inspection by enabling efficient, high-resolution monitoring at various stages of construction, including hard-to-reach areas. Traditional manual operation of drones in GPS-denied environments, such as industrial facilities and infrastructure, is labour-intensive, tedious and prone to error. This study presents an innovative framework for smart MAV inspections in such complex and GPS-denied indoor environments. The framework features a hierarchical perception and planning system that identifies regions of interest and optimises task paths. It also presents an advanced MAV system with enhanced localisation and motion planning capabilities, integrated with Neural Reconstruction technology for comprehensive 3D reconstruction of building structures. The effectiveness of the framework was empirically validated in a 4,000 square meters indoor infrastructure facility with an interior length of 80 metres, a width of 50 metres and a height of 7 metres. The main structure consists of columns and walls. Experimental results show that our MAV system performs exceptionally well in autonomous inspection tasks, achieving a 100\% success rate in generating and executing scan paths. Extensive experiments validate the manoeuvrability of our developed MAV, achieving a 100\% success rate in motion planning with a tracking error of less than 0.1 metres. In addition, the enhanced reconstruction method using 3D Gaussian Splatting technology enables the generation of high-fidelity rendering models from the acquired data. Overall, our novel method represents a significant advancement in the use of robotics for infrastructure inspection.

Robotics
Toward Autonomy of Micro Aerial Vehicles in Unknown and Global Positioning System Denied Environments

Yu Zhou,Shupeng Lai,Huimin Cheng,Abdul Hamid Mohamed Redhwan,Pengfei Wang,Junji Zhu,Zhi Gao,Zhengtian Ma,Yingcai Bi,Feng Lin,Ben M. Chen

DOI: https://doi.org/10.1109/tie.2020.3008378

IF: 7.7

2021-08-01

IEEE Transactions on Industrial Electronics

Abstract:In this article, we present a comprehensive design and implementation for a micro aerial vehicle (MAV) that is able to perform 3-D autonomous navigation and obstacle avoidance in cluttered and realistic unknown environments without the aid of global positioning system and other external sensors or markers. To achieve these autonomous missions, modularized components are developed for the MAV, including visual–inertial odometry, 3-D occupancy mapping, and motion planning. The proposed system is implemented to run on a small embedded computer in real time. It is demonstrated to be robust in both simulation and real flight experiments. The demonstration video is available at: https://youtu.be/KUKzsnORm-4.

automation & control systems,engineering, electrical & electronic,instruments & instrumentation
Three-Dimensional Geometric-Physical Modeling of an Environment with an In-House-Developed Multi-Sensor Robotic System

Su Zhang,Minglang Yu,Haoyu Chen,Minchao Zhang,Kai Tan,Xufeng Chen,Haipeng Wang,Feng Xu

DOI: https://doi.org/10.3390/rs16203897

IF: 5

2024-10-21

Remote Sensing

Abstract:Environment 3D modeling is critical for the development of future intelligent unmanned systems. This paper proposes a multi-sensor robotic system for environmental geometric-physical modeling and the corresponding data processing methods. The system is primarily equipped with a millimeter-wave cascaded radar and a multispectral camera to acquire the electromagnetic characteristics and material categories of the target environment and simultaneously employs light detection and ranging (LiDAR) and an optical camera to achieve a three-dimensional spatial reconstruction of the environment. Specifically, the millimeter-wave radar sensor adopts a multiple input multiple output (MIMO) array and obtains 3D synthetic aperture radar images through 1D mechanical scanning perpendicular to the array, thereby capturing the electromagnetic properties of the environment. The multispectral camera, equipped with nine channels, provides rich spectral information for material identification and clustering. Additionally, LiDAR is used to obtain a 3D point cloud, combined with the RGB images captured by the optical camera, enabling the construction of a three-dimensional geometric model. By fusing the data from four sensors, a comprehensive geometric-physical model of the environment can be constructed. Experiments conducted in indoor environments demonstrated excellent spatial-geometric-physical reconstruction results. This system can play an important role in various applications, such as environment modeling and planning.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Safe and Robust Mobile Robot Navigation in Uneven Indoor Environments

Chaoqun Wang,Jiankun Wang,Chenming Li,Danny Ho,Jiyu Cheng,Tingfang Yan,Lili Meng,Max Q.-H. Meng

DOI: https://doi.org/10.3390/s19132993

IF: 3.9

2019-07-07

Sensors

Abstract:Complex environments pose great challenges for autonomous mobile robot navigation. In this study, we address the problem of autonomous navigation in 3D environments with staircases and slopes. An integrated system for safe mobile robot navigation in 3D complex environments is presented and both the perception and navigation capabilities are incorporated into the modular and reusable framework. Firstly, to distinguish the slope from the staircase in the environment, the robot builds a 3D OctoMap of the environment with a novel Simultaneously Localization and Mapping (SLAM) framework using the information of wheel odometry, a 2D laser scanner, and an RGB-D camera. Then, we introduce the traversable map, which is generated by the multi-layer 2D maps extracted from the 3D OctoMap. This traversable map serves as the input for autonomous navigation when the robot faces slopes and staircases. Moreover, to enable robust robot navigation in 3D environments, a novel camera re-localization method based on regression forest towards stable 3D localization is incorporated into this framework. In addition, we utilize a variable step size Rapidly-exploring Random Tree (RRT) method which can adjust the exploring step size automatically without tuning this parameter manually according to the environment, so that the navigation efficiency is improved. The experiments are conducted in different kinds of environments and the output results demonstrate that the proposed system enables the robot to navigate efficiently and robustly in complex 3D environments.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Autonomous Navigation System of Greenhouse Mobile Robot Based on 3D Lidar and 2D Lidar SLAM

Saike Jiang,Shilin Wang,Zhongyi Yi,Meina Zhang,Xiaolan Lv

DOI: https://doi.org/10.3389/fpls.2022.815218

IF: 5.6

2022-03-10

Frontiers in Plant Science

Abstract:The application of mobile robots is an important link in the development of intelligent greenhouses. In view of the complex environment of a greenhouse, achieving precise positioning and navigation by robots has become the primary problem to be solved. Simultaneous localization and mapping (SLAM) technology is a hot spot in solving the positioning and navigation in an unknown indoor environment in recent years. Among them, the SLAM based on a two-dimensional (2D) Lidar can only collect the environmental information at the level of Lidar, while the SLAM based on a 3D Lidar demands a high computation cost; hence, it has higher requirements for the industrial computers. In this study, the robot navigation control system initially filtered the information of a 3D greenhouse environment collected by a 3D Lidar and fused the information into 2D information, and then, based on the robot odometers and inertial measurement unit information, the system has achieved a timely positioning and construction of the greenhouse environment by a robot using a 2D Lidar SLAM algorithm in Cartographer. This method not only ensures the accuracy of a greenhouse environmental map but also reduces the performance requirements on the industrial computer. In terms of path planning, the Dijkstra algorithm was used to plan the global navigation path of the robot while the Dynamic Window Approach (DWA) algorithm was used to plan the local navigation path of the robot. Through the positioning test, the average position deviation of the robot from the target positioning point is less than 8 cm with a standard deviation (SD) of less than 3 cm; the average course deviation is less than 3° with an SD of less than 1° at the moving speed of 0.4 m/s. The robot moves at the speed of 0.2, 0.4, and 0.6 m/s, respectively; the average lateral deviation between the actual movement path and the target movement path is less than 10 cm, and the SD is less than 6 cm; the average course deviation is <3°, and the SD is <1.5°. Both the positioning accuracy and the navigation accuracy of the robot can meet the requirements of mobile navigation and positioning in the greenhouse environment.

plant sciences
Towards field deployment of MAVs in adaptive exploration of GPS-denied subterranean environments

Akash Patel,Samuel Karlsson,Björn Lindqvist,Jakub Haluska,Christoforos Kanellakis,Ali Agha-mohammadi,George Nikolakopoulos

DOI: https://doi.org/10.1016/j.robot.2024.104663

IF: 3.7

2024-03-08

Robotics and Autonomous Systems

Abstract:Exploration and safe navigation in previously unknown GPS-denied obstructed areas are major challenges for autonomous robots when deployed in subterranean environments. In response, this work establishes an Exploration-Planning framework developed for the real-world deployment of Micro Aerial Vehicles (MAVs) in subterranean exploration missions. The fundamental task, for an autonomous MAV to navigate in an unknown area, is to decide where to look while navigating such that the MAV will acquire more information about the surrounding. The work presented in this article focuses around 3D exploration of large-scale caves or multi-branched tunnel like structures, while still prioritizing the Look Ahead and Move Forward approach for fast navigation in previously unknown areas. In order to achieve such exploration behaviour, the proposed work utilizes a two-layer navigation approach. The first layer deals with computing traversable frontiers to generate the look ahead poses in the constrained field of view, aligned with the MAV's heading vector that leads to a rapid continuous exploration. The proposed frontier distribution based switching goal selection approach allows the MAV to explore various terrains, while still regulating the MAV's heading vector. The second layer of the proposed scheme deals with global cost based navigation of the MAV to the potential junction in a multi-branched tunnel system leading to a continuous exploration of partially seen areas. The proposed framework is a combination of a novel frontier goal selection approach, risk aware expandable grid based path planning and nonlinear model predictive control and artificial potential fields based on local reactive navigation, obstacle avoidance, and control for the autonomous deployment of MAVs in extreme environments such as the Sub-T environments.

robotics,automation & control systems,computer science, artificial intelligence
Mapless Navigation Based on 2D LIDAR in Complex Unknown Environments

Kai Yan,Baoli Ma

DOI: https://doi.org/10.3390/s20205802

2020-10-14

Abstract:This paper presents a novel approach for navigation in complex and unknown environments. At present, existing local path planners whose control output is the mapping of current sensor data have been widely studied. However, these methods cannot really solve the problem of being trapped by obstacles. We analyzed the reasons and made improvements, and finally our approach can avoid being trapped in complex environments. The proposed method is based on 2D LIDAR. A central part of the approach is finding out gaps in the environment by analyzing sensor data. Then, we choose one of the gaps we find as the sub-goal. Linear and angular velocities are provided by the approach considering nonholonomic mobile robots. The method does not rely on global planners and environment maps. Therefore, it has the advantages of low computational complexity and fast response, which is of great significance to robots with low computing power; it will also help to reduce the manufacturing cost of robots. In addition, simulations and real tests were performed using the Turtlebot2 robotic platform. Successful results are achieved in both simulations and experimental tests.
A novel perception and semantic mapping method for robot autonomy in orchards

Yaoqiang Pan,Kewei Hu,Hao Cao,Hanwen Kang,Xing Wang

DOI: https://doi.org/10.1016/j.compag.2024.108769

IF: 8.3

2024-03-01

Computers and Electronics in Agriculture

Abstract:Agricultural robots must navigate challenging dynamic and semi-structured environments. Recently, environmental modelling using LiDAR-based SLAM has shown promise in providing highly accurate geometry. However, how this chaotic environmental information can be used to achieve effective robot automation in the agricultural sector remains unexplored. In this study, we propose a novel semantic mapping and navigation framework for achieving robotic autonomy in orchards. It consists of two main components: a semantic processing module and a navigation module. First, we present a novel 3D detection network architecture, 3D-ODN, which can accurately process object instance information from point clouds. Second, we develop a framework to construct the visibility map by incorporating semantic information and terrain analysis. By combining these two critical components, our framework is evaluated in a number of key horticultural production scenarios, including a robotic system for in-situ phenotyping and daily monitoring, and a selective harvesting system in apple orchards. The experimental results show that our method can ensure high accuracy in understanding the environment and enable reliable robot autonomy in agricultural environments.

agriculture, multidisciplinary,computer science, interdisciplinary applications
Vision Object-Oriented Augmented Sampling-Based Autonomous Navigation for Micro Aerial Vehicles

Xishuang Zhao,Jingzheng Chong,Xiaohan Qi,Zhihua Yang

DOI: https://doi.org/10.3390/drones5040107

IF: 5.532

2021-09-30

Drones

Abstract:Autonomous navigation of micro aerial vehicles in unknown environments not only requires exploring their time-varying surroundings, but also ensuring the complete safety of flights at all times. The current research addresses estimation of the potential exploration value neglect of safety issues, especially in situations with a cluttered environment and no prior knowledge. To address this issue, we propose a vision object-oriented autonomous navigation method for environment exploration, which develops a B-spline function-based local trajectory re-planning algorithm by extracting spatial-structure information and selecting temporary target points. The proposed method is evaluated in a variety of cluttered environments, such as forests, building areas, and mines. The experimental results show that the proposed autonomous navigation system can effectively complete the global trajectory, during which an appropriate safe distance could always be maintained from multiple obstacles in the environment.
Autonomous Mobile Robot Navigation in Uneven and Unstructured Indoor Environments

Chaoqun Wang,Lili Meng,Sizhen She,Ian M. Mitchell,Teng Li,Frederick Tung,Weiwei Wan,Max. Q. -H. Meng,Clarence W. de Silva

DOI: https://doi.org/10.48550/arXiv.1710.10523

2017-10-29

Abstract:Robots are increasingly operating in indoor environments designed for and shared with people. However, robots working safely and autonomously in uneven and unstructured environments still face great challenges. Many modern indoor environments are designed with wheelchair accessibility in mind. This presents an opportunity for wheeled robots to navigate through sloped areas while avoiding staircases. In this paper, we present an integrated software and hardware system for autonomous mobile robot navigation in uneven and unstructured indoor environments. This modular and reusable software framework incorporates capabilities of perception and navigation. Our robot first builds a 3D OctoMap representation for the uneven environment with the 3D mapping using wheel odometry, 2D laser and RGB-D data. Then we project multilayer 2D occupancy maps from OctoMap to generate the the traversable map based on layer differences. The safe traversable map serves as the input for efficient autonomous navigation. Furthermore, we employ a variable step size Rapidly Exploring Random Trees that could adjust the step size automatically, eliminating tuning step sizes according to environments. We conduct extensive experiments in simulation and real-world, demonstrating the efficacy and efficiency of our system.

Robotics
3d Scene Reconstruction And Motion Planning For An Autonomous Mobile Robot In Complex Outdoor Scenes

Van Zhuang,Xiaotao Li,Wei Wang,Hang Chen

2011-01-01

Abstract:3D environment modeling and motion planning are two essential tasks for an autonomous mobile robot's outdoor navigation. In order to implement mobile robot large-scale motion planning, an edge-feature-based ICP algorithm is presented to complete 3D scene registration and reconstruction. According to the respective advantages of geometric features and terrain features, a novel motion planning approach is proposed based on the reconstructed scene. This method integrates the planar features and elevation information in one map to build the 3D roadmap, and then search a safe path with multiple constraints. A series of experiment results show the method's validity and practicability.
The Navigation Based on Hybrid A Star and TEB Algorithm Implemented in Obstacles Avoidance

Min Dai,Hongzhang Zheng,Fang Jia,Zhisheng Zhang,Guifu Zhang,Zhijie Xia

DOI: https://doi.org/10.1109/M2VIP58386.2023.10413435

2023-11-21

Abstract:Taking driverless and autonomous navigation as an example, artificial intelligence has gradually entered people's vision, and applications such as sweeping robots, rescue robots, safety inspection robots, and driverless cars are playing an increasingly important role in people's daily life. In this paper, two-dimensional Lidar, depth camera, odometer system, etc. are used as the sensor input data of the robot. AMCL (Adaptive Monte Carlo Localization) method is adopted to establish the autonomous positioning function of the robot. Hybrid A Star global path planning algorithm and TEB (Time Elastic Band) local path planning algorithm are used to realize the navigation function of the robot. For the indoor environment, this paper mainly selects the laboratory environment, sets different starting points and ending points, and evaluates the path planning of the robot under static obstacles and dynamic obstacles. The navigation function of the robot is tested according to two important indexes: whether collision occurs during the actual movement of the robot and whether dynamic obstacles can be avoided. The experimental results show that the robot can avoid the static obstacle and the dynamic obstacle well under the above scheme.

Engineering,Computer Science
Toward Autonomous Navigation Using an RGB-D Camera for Flight in Unknown Indoor Environments

Liangwen Tang,Sheng Yang,Nong Cheng,Qing Li

DOI: https://doi.org/10.1109/cgncc.2014.7007485

2014-01-01

Abstract:Because of their potential important role in tasks of 3D space which ground vehicles cannot perform, autonomous flight and exploration of micro aerial vehicle(MAV) has attracted increasing attention. Many researches focused on flight with RGB cameras or laser range finders, whereas MAV with RGB-D cameras has been rarely mentioned. In this paper we present an autonomous navigation system for indoor flight with only onboard sensors - an RGB-D camera and a low-cost MEMS inertial measurement unit(IMU). In order to get the best performance of navigation, many visual odometry techniques have been evaluated through experiments. Then, hover and trajectory flight experiments prove the design is valid and efficient for autonomous flight in complex indoor environments.

Autonomous navigation and environment modeling for MAVs in 3-D enclosed industrial environments

Autonomous navigation and environment modeling for MAVs in 3-D enclosed industrial environments

3D Map Building for Mobile Robot under Unknown Outdoor Environments

Active Planning of Robot Navigation for 3D Scene Exploration

3-D Map Reconstruction in Cross-country Environment

Binocular Stereo Vision Based 3D Mapping for Micro Aerial Vehicles in an Indoor Environment

Visual Odometry and 3D Mapping in Indoor Environments

Advanced 3D Navigation System for AGV in Complex Smart Factory Environments

Developing Smart MAVs for Autonomous Inspection in GPS-denied Constructions

Toward Autonomy of Micro Aerial Vehicles in Unknown and Global Positioning System Denied Environments

Three-Dimensional Geometric-Physical Modeling of an Environment with an In-House-Developed Multi-Sensor Robotic System

Safe and Robust Mobile Robot Navigation in Uneven Indoor Environments

Autonomous Navigation System of Greenhouse Mobile Robot Based on 3D Lidar and 2D Lidar SLAM

Towards field deployment of MAVs in adaptive exploration of GPS-denied subterranean environments

Mapless Navigation Based on 2D LIDAR in Complex Unknown Environments

A novel perception and semantic mapping method for robot autonomy in orchards

Vision Object-Oriented Augmented Sampling-Based Autonomous Navigation for Micro Aerial Vehicles

Autonomous Mobile Robot Navigation in Uneven and Unstructured Indoor Environments

3d Scene Reconstruction And Motion Planning For An Autonomous Mobile Robot In Complex Outdoor Scenes

The Navigation Based on Hybrid A Star and TEB Algorithm Implemented in Obstacles Avoidance

Toward Autonomous Navigation Using an RGB-D Camera for Flight in Unknown Indoor Environments