Abstract:Several heat-to-power conversion technologies are being proposed as suitable for waste-heat recovery (WHR) applications, including thermoelectric generators, hot-air (e.g., Ericsson or Stirling) engines and vapour-cycle engines such as steam or organic Rankine cycle (ORC) power systems. The latter technology has demonstrated the highest efficiencies at small and intermediate scales and low to medium heat-source temperatures and is considered a suitable option for WHR in relevant applications. However, ORC systems experience variations in performance at part-load or off-design conditions, which need to be predicted accurately by empirical or physics-based models if one is to assess accurately the techno-economic potential of such ORC-WHR solutions. This paper presents results from an experimental investigation of the part-load performance of a 1-kWe ORC engine, operated with R245fa as a working fluid, with the aim of producing high-fidelity steady-state and transient data relating to the operational performance of this system. The experimental apparatus is composed of a rotary-vane pump, brazed-plate evaporator and condenser units and a scroll expander magnetically coupled to a generator with an adjustable resistive load. An electric heater is used to provide a hot oil-stream to the evaporator, supplied at three different temperatures in the current study: 100, 120 and 140 ° C. The optimal operating conditions, that is, pump speed and expander load, are determined at various heat-source conditions, thus resulting in a total of 124 steady-state data points used to analyse the part-load performance of the engine. A maximum thermal efficiency of 4.2 ± 0.1% is reported for a heat-source temperature of 120 ° C, while a maximum net power output of 508 ± 2 W is obtained for a heat-source temperature at 140 ° C. For a 100- ° C heat source, a maximum exergy efficiency of 18.7 ± 0.3% is achieved. A detailed exergy analysis allows us to quantify the contribution of each component to the overall exergy destruction. The share of the evaporator, condenser and expander components are all significant for the three heat-source conditions, while the exergy destroyed in the pump is negligible by comparison (below 4%). The data can be used for the development and validation of advanced models capable of steady-state part-load and off-design performance predictions, as well as predictions of the transient/dynamic operation of ORC systems.

Energy Recovery Efficiency Analysis of Organic Rankine Cycle System in Vehicle Engine under Different Road Conditions

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Thermoeconomic Optimization Design of the ORC System Installed on a Light-Duty Vehicle for Waste Heat Recovery from Exhaust Heat

Optimal Design of Organic Rankine Cycles for Exhaust Heat Recovery from Light-Duty Vehicles in View of Various Exhaust Gas Conditions and Negative Aspects of Mobile Vehicles

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Comparison study of Trilateral Rankine Cycle, Organic Flash Cycle and basic Organic Rankine Cycle for low grade heat recovery

Parametric study for small scale engine coolant and exhaust heat recovery system using different Organic Rankine cycle layouts

Investigation of Organic Rankine Cycle Integrated with Double Latent Thermal Energy Storage for Engine Waste Heat Recovery

Machine learning-based multi-objective optimization and thermodynamic evaluation of organic Rankine cycle (ORC) system for vehicle engine under road condition

The Investigation of the Recuperative Organic Rankine Cycle Models for the Waste Heat Recovery on Vehicles

Simulation Analysis of Cooling Methods of an On-Board Organic Rankine Cycle Exhaust Heat Recovery System

Effect Factors of Part-Load Performance for Various Organic Rankine Cycles Using in Engine Waste Heat Recovery

Engine Load Effects on the Energy and Exergy Performance of a Medium Cycle/Organic Rankine Cycle for Exhaust Waste Heat Recovery.

Part-Load Performance Prediction And Operation Strategy Design Of Organic Rankine Cycles With A Medium Cycle Used For Recovering Waste Heat From Gaseous Fuel Engines

Engine Working Condition Effects on the Dynamic Response of Organic Rankine Cycle As Exhaust Waste Heat Recovery System

Comparison Study of Four Typical ORC Configurations for Different Waste Heat Characteristics of Engine

System Design and Control for Waste Heat Recovery of Automotive Engines Based on Organic Rankine Cycle

Information theory-based dynamic feature capture and global multi-objective optimization approach for organic Rankine cycle (ORC) considering road environment

Performance Simulation Of An Integrated Organic Rankine Cycle And Air Inter-Cooling System For Heavy-Duty Diesel Truck Engines

Operational Optimisation of a Non-Recuperative 1-Kwe Organic Rankine Cycle Engine Prototype

Study of parameters optimization of Organic Rankine cycle (ORC) for engine waste heat recovery