Abstract:Novel Ti6Al4V-based porous Ta scaffolds were successfully manufactured using LPBF.Scaffolds were biomechanically compatible, the interfacial bonding strength was high.In vitro and in vivo biocompatibility was high in r-BMSCs and rabbits, respectively.The scaffold possesses great potential for orthopedic clinical applications.Despite the widespread application of Ti6Al4V and tantalum (Ta) in orthopedics, bioinertia and high cost limit their further applicability, respectively, and tremendous efforts have been made on the Ti6Al4V-Ta alloy and Ta coating to address these drawbacks. However, the scaffolds obtained are unsatisfactory. In this study, novel high-interface-strength Ti6Al4V-based porous Ta scaffolds were successfully manufactured using Laser Powder Bed Fusion for the first time, in which porous Ta was directly manufactured on a solid Ti6Al4V substrate. Mechanical testing revealed that the novel scaffolds were biomechanically compatible, and the interfacial bonding strength was as high as 447.5 MPa. In vitro biocompatibility assay, using rat bone marrow mesenchymal stem cells (r-BMSCs), indicated that the novel scaffolds were biocompatible. Alkaline phosphatase and mineralized nodule determination demonstrated that the scaffolds favored the osteogenic differentiation of r-BMSCs. Moreover, scaffolds were implanted into rabbits with femur bone defects, and imaging and histological evaluation identified considerable new bone formation and bone ingrowth, suggesting that the scaffolds were well integrated with the host bone. Overall, these results demonstrated good mechanical compatibility, biocompatibility, and osteointegration performance of the novel Ti6Al4V-based porous Ta scaffold, which possesses great potential for orthopedic clinical applications.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2452199X21002450-ga1_lrg.jpg">Download : Download high-res image (348KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2452199X21002450-ga1.jpg">Download : Download full-size image</a></li></ol>

Improved Osteointegration and Angiogenesis of Strontium-Incorporated 3D-Printed Tantalum Scaffold Via Bioinspired Polydopamine Coating

Facile Fabrication of 3D-Printed Porous Ti6Al4V Scaffolds with a Sr-CaP Coating for Bone Regeneration

Atomic Layer Deposition of Tantalum Oxide Films on 3D-Printed Ti6Al4V Scaffolds with Enhanced Osteogenic Property for Orthopedic Implants

Nano tantalum-coated 3D printed porous polylactic acid/beta-tricalcium phosphate scaffolds with enhanced biological properties for guided bone regeneration

Selective Laser Melting of the Porous Ta Scaffold with Mg-Doped Calcium Phosphate Coating for Orthopedic Applications

Preparation and Biological Evaluation of Porous Tantalum Scaffolds Coated with Hydroxyapatite

Immobilizing magnesium ions on 3D printed porous tantalum scaffolds with polydopamine for improved vascularization and osteogenesis

The Incorporation of Strontium in a Sodium Alginate Coating on Titanium Surfaces for Improved Biological Properties

In Vitro and in Vivo Study of 3D-Printed Porous Tantalum Scaffolds for Repairing Bone Defects.

Polydopamine Coating Promotes Early Osteogenesis in 3D Printing Porous Ti6Al4V Scaffolds.

Study of Bone Regeneration and Osteointegration Effect of a Novel Selective Laser-Melted Titanium-Tantalum-Niobium-Zirconium Alloy Scaffold

A Polydopamine-Assisted Strontium-Substituted Apatite Coating for Titanium Promotes Osteogenesis and Angiogenesis Via FAK/MAPK and PI3K/AKT Signaling Pathways

Combined Effects of Polydopamine-Assisted Copper Immobilization on 3D-Printed Porous Ti6Al4V Scaffold for Angiogenic and Osteogenic Bone Regeneration

3D-Printed Strontium-Incorporated Β-Tcp Bioceramic Triply Periodic Minimal Surface Scaffolds with Simultaneous High Porosity, Enhanced Strength, and Excellent Bioactivity

3D printing of a titanium-tantalum Gyroid scaffold with superb elastic admissible strain, bioactivity and in-situ bone regeneration capability

Comparison of 3D-printed porous tantalum and titanium scaffolds on osteointegration and osteogenesis

Biocompatible Nanotube‐Strontium/polydopamine‐arginine–glycine–aspartic Acid Coating on Ti6Al4V Enhances Osteogenic Properties for Biomedical Applications

Synergistic Enhancement of Osseointegration with Micro-Arc Oxidation Treated 3D-Printed Ti-24nb-4zr-8sn Scaffold Via Contact Osteogenesis and Low Elastic Modulus

Improving Biological Functions of Three-Dimensional Printed Ti2448 Scaffolds by Decoration with Polydopamine and Extracellular Matrices

Porous tantalum structure integrated on Ti6Al4V base by Laser Powder Bed Fusion for enhanced bony-ingrowth implants: In vitro and in vivo validation

Strontium/adiponectin Co-Decoration Modulates the Osteogenic Activity of Nano-Morphologic Polyetheretherketone Implant.