Abstract:Organic electroactive materials derived from biomasses are promising candidates for next generation rechargeable batteries due to low cost, sustainability and environmental benignity. However, the organic electrodes still suffer from low power density and poor cycling stability, caused by low electronic conductivity and high solubility in liquid organic electrolytes. Herein, we firstly reported a unique in situ organic electrode fabrication technology for Na-ion batteries. Using the 2,5-Dihydroxy-1,4-benzoquinone disodium salt (DHBQDS) as an organic anode, the DHBQDS nanorod electrode is in situ formed during electrode fabrication process by precipitating DHBQDS from DHBQDS-sodium alginate-carbon black aqueous slurry film on a Cu current collector during drying process. In the slurry film, the sodium alginate binder and carbon black play a critical role in the formation of DHBQDS nanorods. Integrating the synthesis of nano-electrode materials into electrode fabrication process greatly simplifies the electrode preparation process and will significantly reduce the battery cost. Due to the fast ionic and electronic conduction of DHBQDS-carbon nanocomposite, the DHBQDS nanorod electrodes deliver a reversible capacity of 167 mAh g-1 at a high current density of 200 mA g-1 after 300 cycles, which is 87% of its initial capacity (capacity decay rate of 0.051% per cycle). To reduce the dissolution of DHBQDS in the electrolyte upon cycling, a thin layer of Al2O3 with thickness of 1nm or 2 nm was coated on the DHBQDS nanorod electrodes using atomic layer deposition (ALD). The Al2O3 coating remarkably suppresses the dissolution of DHBQDS nanorods as evidenced by the increased Coulombic efficiency from 94% to ~100% at a low current density of 50 mA g-1 after initial few activation cycles. The reversible capacity of Al2O3 coated DHBQDS nanorod electrodes remains at 212 mAh g-1 after 300 cycles with a very low capacity decay rate of 0.049% per cycle. The ALD enhanced organic nanorods exhibit the best reversible capacity and cycle life among the organic electrodes reported for Na-ion batteries.

Synthesis of Polyanionic Anthraquinones As New Insoluble Organic Cathodes for Organic Na-ion Batteries

A polyanionic anthraquinone organic cathode for pure small-molecule organic Li-ion batteries

Highly Stable and High Rate-Performance Na-Ion Batteries Using Polyanionic Anthraquinone As the Organic Cathode.

Long-lifespan Polyanionic Organic Cathodes for Highly Efficient Organic Sodium-ion Batteries.

Benzene-bridged Anthraquinones As a High-Rate and Long-Lifespan Organic Cathode for Advanced Na-ion Batteries

Polymer organic cathodes enable efficient desolvation for highly stable sodium-ion batteries

Insoluble Polyanionic Anthraquinones with Two Strong Ionic O-K Bonds As Stable Organic Cathodes for Pure Organic K-ion Batteries

Reversible Redox Chemistry of Azo Compounds for Sodium‐Ion Batteries

Phenanthraquinone-based polymer organic cathodes for highly efficient Na-ion batteries

A polyanionic organic cathode for highly efficient K-ion full batteries

Ultra-Stable, Ultra-Long-Lifespan and Ultra-High-Rate Na-ion Batteries Using Small-Molecule Organic Cathodes

Pyridine-based Benzoquinone Derivatives as Organic Cathode Materials for Sodium Ion Batteries

Self-carbonization of Soluble Organic Cathodes Enables Stable Na-ion Batteries

A Dual-Insertion Type Sodium-Ion Full Cell Based on High-Quality Ternary-Metal Prussian Blue Analogs

A Low Redox Potential and Long Life Organic Anode Material for Sodium-Ion Batteries

A Dual‐Insertion Type Sodium‐Ion Full Cell Based on High‐Quality Ternary‐Metal Prussian Blue Analogs

Redox‐Bipolar Covalent Organic Framework Cathode for Advanced Sodium‐Organic Batteries

A Small‐Molecule Organic Cathode with Extended Conjugation toward Enhancing Na+ Migration Kinetics for Advanced Sodium‐Ion Batteries

High-Entropy-Stabilized Polyanionic Cathodes with Multiple Redox Reactions for Sodium-Ion Battery Applications

Electropolymerized Organic N/P Bipolar Cathode Toward High Energy and High Power Density Sodium Dual-Ion Batteries

In Situ Precipitated Organic Nanorod Electrodes for Sodium Ion Batteries