Influence of Natural and Synthetic Additives on Calcium Carbonate Precipitation and Crystal Morphology
Z. Amjad
DOI: https://doi.org/10.3139/113.100306
2006-09-01
Tenside Surfactants Detergents
Abstract:Abstract The pH-stat technique has been used to study the influence of several natural and synthetic additives containing carboxyl, phenolic, and sulfonic groups on the precipitation of calcium carbonate from supersaturated solutions (Ca=HCO 3 = 5.50 mM, NaCl=0.10 M, pH 8.50, 35°C). The additives investigated were natural i.e., green tea extract, GTE; sodium lignosulfonate, SLS and synthetic i.e., poly(acrylic acid), P-AA; poly(2-acrylamido-2-methyl-propane sulfonic acid), P-SA. It has been found that addition of low concentrations of additive has three fold effects: a) it delays the precipitation of calcium carbonate, b) it inhibits the rate of precipitation, and c) it influences the calcium carbonate polymorph. Based on the results obtained under the test conditions, the ranking in terms of decreasing effectiveness is: P-AA ≫ GTE>SLS ∼ P-SA. The results also indicate that the delay in precipitation increases with increasing additive concentration. SEM and X-ray diffraction studies of calcium carbonate precipitated in the presence of additives reveal that whereas P-AA and P-SA favor the formation of vaterite, GTE and SLS influence the formation of calcite. By contrast, the predominant polymorph formed in the absence of additive is vaterite. Kinetic analysis suggests Langmuir-type adsorption of added additive ions on the active growth sites of CaCO 3 crystals.
engineering, chemical,chemistry, applied, physical