Abstract:Unlike the conventional practice of supplying energy for batch drying processes at a constant rate, newly developed intermittent drying processes employ time-varying heat input tailored to match the drying kinetics of the material being dried. The energy required may be supplied by combining different modes of heat transfer (e.g. convection coupled with conduction or radiation or dielectric heating simultaneously or in a pre-selected sequence) in a time-varying fashion so as to provide optimal drying kinetics as well as quality of the bioproduct. This is especially important for drying of heat-sensitive materials (such as foods, pharmaceutical, neutraceutical substances, herbs, spices and herbal medicines). Intermittent heat supply is beneficial only for materials which dry primarily in the falling rate period where internal diffusion of heat and moisture controls the overall drying rate. Periods when little or no heat is supplied for drying allow the tempering period needed for the moisture and heat to diffuse within the material. As the moisture content increases at the surface of the biomaterial during the tempering period, the rate of drying is higher when heat input is resumed. It is possible to control the heat input such that the surface temperature of the product does not exceed a pre-determined value beyond which thermal damage of the material may occur. This process results in reduction in the use of thermal energy as well as the mass of air used in convective drying. Thus, the thermal efficiency of such a process is higher. The quality of the product, as such color and ascorbic acid content, is also typically superior to that obtained with a continuous supply of heat. However, in some cases, there will be a nominal increase in drying time. In the case of microwave-assisted and heat pump drying, for example, the capital cost of the drying system can also be reduced by drying in the intermittent mode. This paper provides an overview of the basic process, selected results from experiments and mathematical models for a variety of biomaterials dried in a wide assortment of dryers. It begins with a classification of intermittent drying processes that may be applied e.g. time-varying temperature, air flow rate, operating pressure as well as heat input by different modes and in different temporal variations. The beneficial effects of improving the quality of dried bioproducts by different intermittent processes are also included and discussed.

Characterization of Moisture Transfer During Intermittent Drying Process for Broccoli from LF-NMR Experiments

Reveal the internal moisture changes of white gourd during hot air-drying process using low-field NMR

Use of low‐field nuclear magnetic resonance for moisture variation analysis of fresh in‐shell peanut during different drying methods

Research on the Vegetable Shrinkage During Drying and Characterization and Control Based on LF-NMR

Moisture variation analysis of the green plum during the drying process based on low-field nuclear magnetic resonance.

Intermittent drying of bioproducts--an overview

Effect of Intermittent Microwave Volumetric Heating on Dehydration, Energy Consumption, Antioxidant Substances, and Sensory Qualities of Litchi Fruit during Vacuum Drying

Water Status and Predictive Models of Moisture Content during Drying of Soybean Dregs Based on LF-NMR

Intermittent Microwave Drying of Litchi: Drying Kinetics and Quality Formation in Color Difference

Moisture migration analysis of Chinese naked oat during different storage conditions by sorption isotherm model and low‐field NMR

Short-Term Responses of Nitrogen Mineralization and Microbial Community to Moisture Regimes in Greenhouse Vegetable Soils

Monitoring of water content of apple slices using low‐field nuclear magnetic resonance during drying process

Study on the Quality Variation and Internal Mechanisms of Frozen Oatmeal Cooked Noodles during Freeze–Thaw Cycles

"Dry" pleural mesothelioma successfully diagnosed on endobronchial ultrasound (EBUS)-guided transbronchial needle aspiration (TBNA).

Quality of plant-based food materials and its prediction during intermittent drying

Study on Intermittent Microwave Convective Drying Characteristics and Flow Field of Porous Media Food

Drying Characteristics of Soybean (Glycine Max) Using Continuous Drying and Intermittent Drying

Online measurement of moisture content, moisture distribution, and state of water in corn kernels during microwave vacuum drying using novel smart NMR/MRI detection system

Dehydration modeling of Cordyceps militaris in mid-infrared-assisted convection drying system: Using low-field nuclear magnetic resonance with the aid of ELM and PLSR

Variation of moisture state and taste characteristics during vacuum drying of Maillard reaction intermediates of hydrolyzed soybean protein and characterization of browning precursors via fluorescence spectroscopy

Effects of Different Drying Methods on the Drying Characteristics and Quality of Codonopsis pilosulae Slices