Abstract:The effects of three kinds of oxygenated fuel blends—i.e., ethanol-gasoline, n-butanol-gasoline, and 2,5-dimethylfuran (DMF)-gasoline-on fuel consumption, emissions, and acceleration performance were investigated in a passenger car with a chassis dynamometer. The engine mounted in the vehicle was a four-cylinder, four-stroke, turbocharging gasoline direct injection (GDI) engine with a displacement of 1.395 L. The test fuels include ethanol-gasoline, n-butanol-gasoline, and DMF-gasoline with four blending ratios of 20%, 50%, 75%, and 100%, and pure gasoline was also tested for comparison. The original contribution of this article is to systemically study the steady-state, transient-state, cold-start, and acceleration performance of the tested fuels under a wide range of blending ratios, especially at high blending ratios. It provides new insight and knowledge of the emission alleviation technique in terms of tailoring the biofuels in GDI turbocharged engines. The results of our works showed that operation with ethanol–gasoline, n-butanol–gasoline, and DMF–gasoline at high blending ratios could be realized in the GDI vehicle without any modification to its engine and the control system at the steady state. At steady-state operation, as compared with pure gasoline, the results indicated that blending n-butanol could reduce CO2, CO, total hydrocarbon (THC), and NOX emissions, which were also decreased by employing a higher blending ratio of n-butanol. However, a high fraction of n-butanol increased the volumetric fuel consumption, and so did the DMF–gasoline and ethanol–gasoline blends. A large fraction of DMF reduced THC emissions, but increased CO2 and NOX emissions. Blending n-butanol can improve the equivalent fuel consumption. Moreover, the particle number (PN) emissions were significantly decreased when using the high blending ratios of the three kinds of oxygenated fuels. According to the results of the New European Drive Cycle (NEDC) cycle, blending 20% of n-butanol with gasoline decreased CO2 emissions by 5.7% compared with pure gasoline and simultaneously reduced CO, THC, NOX emissions, while blending ethanol only reduced NOX emissions. PN and particulate matter (PM) emissions decreased significantly in all stages of the NEDC cycle with the oxygenated fuel blends; the highest reduction ratio in PN was 72.87% upon blending 20% ethanol at the NEDC cycle. The high proportion of n-butanol and DMF improved the acceleration performance of the vehicle.

Evaluation of fuel consumption, pollutant emissions and well-to-wheel GHGs assessment from a vehicle operation fueled with bioethanol, gasoline and hydrogen

Energy Saving and Pollutant Emission Reduction by Adding Hydrogen in a Gasoline-fueled Engine

Comparative Effect of Fuel Ethanol Content on Regulated and Unregulated Emissions from Old Model Vehicles: an Assessment and Policy Implications

Experimental Study on Combustion and Emission Characteristics of Fatty Acid Methyl Esters and Hydrogenated Catalytic Biodiesel/diesel Blends under World Harmonized Steady State Cycle

Experimental Research on Regulated and Unregulated Emissions from E20-Fuelled Vehicles and Hybrid Electric Vehicles

Assessment of Ethanol Blended Fuels for Gasoline Vehicles in China: Fuel Economy, Regulated Gaseous Pollutants and Particulate Matter.

Life-Cycle Analysis of Bio-Ethanol Fuel Emissions of Transportation Vehicles in Greater Houston Area

Leveraging the Benefits of Ethanol in Advanced Engine-Fuel Systems

Numerical comparative analysis on performance and emission characteristics of methanol/hydrogen, ethanol/hydrogen and butanol/hydrogen blends fuels under lean burn conditions in SI engine

Performance And Emissions Of A Gasoline Engine Fueled With Hydrous Ethanol Gasoline Blends

Assessments of the Power Production, Energy Consumption and Emission Comparison of Hydrogen Feed Vehicles

Effects of Methanol Application on Carbon Emissions and Pollutant Emissions Using a Passenger Vehicle

Exhaust Noise, Performance and Emission Characteristics of Spark Ignition Engine Fuelled with Pure Gasoline and Hydrous Ethanol Gasoline Blends

Multiobjective Component Sizing of a Hybrid Ethanol-Electric Vehicle Propulsion System

Effects of diesel-ethanol-THF blend fuel on the performance and exhaust emissions on a heavy-duty diesel engine

The effects of hydrogen peroxide-ethanol blend/gasoline on the combustion and emission performance of a combined injection spark ignition engine

Impact of Bioethanol Concentration in Gasoline on SI Engine Sustainability

Investigation on Blending Effects of Gasoline Fuel with N-Butanol, DMF, and Ethanol on the Fuel Consumption and Harmful Emissions in a GDI Vehicle

Experimental study on the idle performance of a spark-ignition engine fueled with hydrogen-gasoline blends

Research on unregulated emissions from an alcohols-gasoline blend vehicle using FTIR, HPLC and GC-MS measuring methods