High-Luminance Microsized CH 3 NH 3 PbBr 3 Single-Crystal-Based Light-Emitting Diodes via a Facile Liquid-Insulator Bridging Route
Huanyu Zhang,Tingxiu Yu,Chaoqiang Wang,Ruofei Jia,Azhar Ali Ayaz Pirzado,Di Wu,Xiujuan Zhang,Xiaohong Zhang,Jiansheng Jie
DOI: https://doi.org/10.1021/acsnano.2c00488
IF: 17.1
2022-04-11
ACS Nano
Abstract:Micro-/nanosized organic–inorganic hybrid perovskite single crystals (SCs) with appropriate thickness and high crystallinity are promising candidates for high-performance electroluminescent (EL) devices. However, their small lateral size poses a great challenge for efficient device construction and performance optimization, causing perovskite SC-based light-emitting diodes (PSC-LEDs) to demonstrate poor EL performance. Here, we develop a facile liquid-insulator bridging (LIB) strategy to fabricate high-luminance PSC-LEDs based on single-crystalline CH3NH3PbBr3 microflakes. By introducing a blade-coated poly(methyl methacrylate) (PMMA) insulating layer to effectively overcome the problems of leakage current and possible short circuits between electrodes, we achieve the reliable fabrication of PSC-LEDs. The LIB method also allows us to systematically boost the device performance through crystal growth regulation and device architecture optimization. Consequently, we realize the best CH3NH3PbBr3 microflake-based PSC-LED with an ultrahigh luminance of 136100 cd m–2 and a half-lifetime of 88.2 min at an initial luminance of ∼1100 cd m–2, which is among the highest for organic–inorganic hybrid perovskite LEDs reported to date. Moreover, we observe the strong polarized edge emission of the microflake-based PSC-LEDs with a high degree of polarization up to 0.69. Our work offers a viable approach for the development of high-performance perovskite SC-based EL devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.2c00488.Schematic reparation process of the perovskite SCs, cross-sectional SEM images of the perovskite SC and PSC-LED, in-plane XRD and SAED pattern of the microflake, schematic illustration of the home-built EL measurement system, EL performance of the polycrystalline perovskite film-based LEDs, angle-dependent EL spectra of the PSC-LED, PLQY and TRPL data of the microflakes prepared with and without FOTS treatments, UPS spectra of the perovskite SCs, waveguide behavior of the MAPbBr3 SC, and the comparison of the representative PSC-LEDs reported to date. (PDF)Movie S1: The PSC-LED is operated at a consistent voltage of 7.0 V. (MP4)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology