Abstract:Chatter is prone to occur in thin-wall part milling process due to the low stiffness and damping of the workpiece. It roughens the machining surface, shortens the tool life, and thus should be detected and prevented. However, the multimode and time-varying dynamics of thin-wall parts produces nonstationary and multicomponent cutting signals, which makes it challenging to accurately identify the chatter occurrence. In this article, an effective chatter identification method based on adaptive variational mode decomposition and decision tree is presented to tackle this problem. The adaptive variational mode decomposition is used to adaptively decompose the raw acoustic signal into several subsignals, and the decision tree is used to automatically determine the chatter threshold. First, the convergence of multicenter-frequency signal processing is analyzed and is proved to be closely related to the accuracy of variational mode decomposition. Afterward, a criterion is set up to initialize the center frequencies of variational mode decomposition, on the basis of which an adaptive energy ratio-based method with good computational efficiency is presented to extract the frequencies of the main components from the raw signal. The initial center frequencies and the number of modes of variational mode decomposition are simultaneously obtained. As a result, the raw signal is adaptively decomposed into several subsignals, which contain its principal components. Then, the normalized energy and sample entropy of the subsignals are selected to establish the decision tree model for automatic chatter identification. Several milling tests on a thin-wall plate are carried out to verify the proposed method. The results show that chatter can be identified accurately and efficiently using the proposed method.

Chatter Identification in Flank Milling of Thin-Walled Blade Based on Fractal Dimension

On-line chatter detection and identification based on wavelet and support vector machine

Chatter Detection for Milling Using Novelp-Leader Multifractal Features

Chatter Identification of the Milling Process Considering Dynamics of the Thin-Walled Workpiece

EEMD-based Online Milling Chatter Detection by Fractal Dimension and Power Spectral Entropy

Milling Chatter Identification by Optimized Variational Mode Decomposition and Fuzzy Entropy

Early Milling Chatter Identification by Improved Empirical Mode Decomposition and Multi-Indicator Synthetic Evaluation

IDENTIFICATION OF END-MILLING CHATTER BASED ON COMPREHENSIVE FEATURE FUSION

Chatter Identification in Thin-Wall Milling Using an Adaptive Variational Mode Decomposition Method Combined with the Decision Tree Model

Chatter detection for milling using novel p-leader multifractal features

Chatter identification in end milling process based on EEMD and nonlinear dimensionless indicators

Investigation on Milling Chatter Identification at Early Stage with Variance Ratio and Hilbert–Huang Transform

Analysis of Q-factor’s Identification Ability for Thin-Walled Part Flank and Mirror Milling Chatter

CHATTER DETECTION IN VIBRATION SIGNALS USING TIME- FREQUENCY ANALYSIS

Zoom Synchrosqueezing Transform-Based Chatter Identification in the Milling Process

Feature Extraction Using Dominant Frequency Bands and Time-Frequency Image Analysis for Chatter Detection in Milling

A Novel Approach for Chatter Online Monitoring Using Coefficient of Variation in Machining Process

Vibration signal-based chatter identification for milling of thin-walled structure

Chatter Detection in Milling Process Based on Synchrosqueezing Transform of Sound Signals

A New Algorithm for Chatter Quantification and Milling Instability Classification Based on Surface Analysis

Chatter Detection in End Milling Processes Based on Wavelet Packet Decomposition and Singular Spectrum Analysis Method