Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The topology optimization is considered to enhance the strength, stiffness, and specific energy absorption of a quasi-honeycomb sandwich structure since it can achieve the optimal distribution of materials. However, the existing material interpolation models do not make the topology structure have good clarity and stability. In the present study, a novel variable-density topology optimization based on an improved interpolation model is developed for the design of a quasi-honeycomb core. The combined cells are circularly spreading outward from the geometric center of the design domain, and the wall thickness function of the equivalent cell (i.e. a simplified model of the combined cell) is established on the basis of relative density. The SR material interpolation model is modified by adding the minimum elastic modulus term, fitting the weighting and penalty factors, and adopting the volume constraint of Bi-directional Evolutionary Structural Optimization (BESO). The optimization is conducted to minimize the compliance of the quasi-honeycomb core, in which the relative densities of equivalent cells are chosen as the design variables due to the mapping between topology elements and equivalent cells. The three-dimensional (3D) geometric models of original and optimized quasi-honeycomb cores, upper face sheets, and lower face sheets are built using SolidWorks and printed on a 3D printer. The deflection, strain, bending stiffness, and energy absorption under different material retention rates, restraint positions, and face sheet thicknesses are investigated by three-point bending tests. It is found that the improved SR material interpolation model is efficient for suppressing the grid dependence and checkerboard, and the mechanical properties of optimized quasi-honeycomb sandwich structures are significantly enhanced in comparison with original structures, confirming that the developed method provides important guidance for designing and optimizing the quasi-honeycomb sandwich structure.

Experimental and numerical investigation of thermoplastic honeycomb sandwich structures under bending loading

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study

Fabrication and mechanical behaviors of recoverable thermoplastic sandwich structures with circular honeycomb cores based on the continuous approach

Fabrication and Bending Behavior of Thermoplastic Composite Curved Corrugated Sandwich Beam with Interface Enhancement

Experimental Study on Mechanical Properties of the Sandwich Composite Structure Reinforced by Basalt Fiber and Nomex Honeycomb

Mechanical responses of a composite sandwich structure with Nomex honeycomb core

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

Experimental and numerical investigation on indentation and energy absorption of a honeycomb sandwich panel under low-velocity impact

Experimental and Numerical Investigation of Static and Fatigue Behaviors of Composites Honeycomb Sandwich Structure

Multi-objective optimization design of a new non-uniform rectangular honeycomb sandwich panel

A numerical study on bending behavior of sandwich beam with novel auxetic honeycomb core

Numerical Studies on Failure Mechanisms of All-Composite Sandwich Structure with Honeycomb Core under Compression and Impact Loading Conditions

Research on Dynamic Response under the External Impact of Paper Honeycomb Sandwich Board

Damage sensitivity studies of composite honeycomb sandwich structures under in-plane compression and 4-point bending: experiments and numerical simulations

Variable-density topology optimization and bending test of quasi-honeycomb sandwich structures

Mechanical performances of metal-polymer sandwich structures with 3D-printed lattice cores subjected to bending load

Mechanical Performance and Failure Analysis of a 3D-Printed "Continuous Layer–Lattice Layer–Continuous Layer" Sandwich Structure

Quasi-static compressive behavior and energy absorption of novel cellular structures with varying cross-section dimension

Bending response and energy absorption of sandwich beams with combined reinforced auxetic honeycomb core

Thermomechanical Collaborative Design and Experimental Verification of a Sandwich Structure with a Polyimide Foam Core

Fabrication and Flatwise Compression Property of Glass Fiber-Reinforced Polypropylene Corrugated Sandwich Panel