Abstract:Graphene quantum dots (GQDs) have received great interest in the past few years due to its unique properties such as the quantum confinement and edge effects when their sizes are down to 10 nm. These new physical properties can induce size-dependent bandgap, and unique optical and electronic properties, which make them excellent materials for photovoltaics and photoelectochemical (PEC) devices. In a dye-sensitized solar cell (DSSC), light harvesting capability of dyes could be enhanced by Förster resonance energy transfer (FRET) phenomena, wherein energy is transferred from an excited donor fluorophore to a suitable acceptor dye molecule. The strict requirement that the overlap of the emission spectrum of donor and absorption spectrum of acceptor, which also requires proper band edge alignment between the them, significantly limits the variety of donors and acceptors suitable for the FRET-based DSSCs. In our DSSC work, graphene quantum dots were co-sensitized with N719 dyes and we successfully explored that the GQDs is a suitable donor material for the N719 dyes. From the emission and time decay spectra analysis, the FRET efficiency was measured to be 27 %. The power conversion efficiency ( ƞ) of the standard DSSC is 6.12 % with a short-circuit current density ( J sc ) of 12.74 mAcm -2 and open-circuit voltage ( V oc ) of 760 mV. The co-sensitization of GQD greatly enhances the ƞ up to 7.96 % with a J sc of 16.54 mAcm -2 and V oc of 770 mV. The co-sensitization of GQDs improved both the J sc and ƞ values by ~ 30 %. The FRET enhanced the overall light absorption capacity of the N719 dye and hence photocurrent generation of the DSSC. Moreover, the co-sensitization of GQDs increase the TiO 2 /dye/electrolyte interface resistance, which suppresses the charge recombination and leads to increased V oc value. For PEC water splitting, higher light absorption can also be achieved by utilizing light-matter interplaymechanisms, such as, surface plasmon resonance (SPR), plasmonicresonance energy transfer (PRET) and exciton−plasmon interactions (EPI). The optical properties of the semiconductor and metal nanoparticles (SNPs-MNPs) are strongly modified via EPI comparing to single NPs. Therefore, we have utilized the unique combination of GQDs and AuNPs (SNPs-MNPs) to effectively enhance PEC performance of TiO 2 nanorods (TNRs). The AuNP-GQD decorated TNR photoelectrode has achieved a superior PEC performance with a photocurrent density of 1.75 mAcm -2 at 1.23 V vs RHE, which is one of higher value obtained in PEC measurement using TiO 2 nanorods due to an efficient utilization of solar light. The experimental analysis has indicated that the AuNPs has contributed to the PRET / SPR-mediated hot electron injection into TiO 2 and the GQDs contributed to the improved electron injection into the TiO 2 . Moreover, the significantly improved PEC water splitting efficiency is attributed to the synergistic effect due to EPI and/or FRET between AuNPs and GQDs in addition to the good catalytic property of the AuNPs and the GQDs.

Green Vegetables Derived Simultaneously Carbon Dots As Sensitizer and Carbon Particles As Counter Electrode for Dye-Sensitized Solar Cells

Carbon Quantum Dot-Passivated Perovskite/Carbon Electrodes for Stable Solar Cells

Green Allium Fistulosum Derived Nitrogen Self-Doped Carbon Dots for Quantum Dot-Sensitized Solar Cells

Graphene Quantum Dots Assisted Photovoltage and Efficiency Enhancement in Cdse Quantum Dot Sensitized Solar Cells

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Transparent MoS<sub>2</sub>/PEDOT Composite Counter Electrodes for Bifacial Dye-Sensitized Solar Cells

Modulation Doping of Absorbent Cotton Derived Carbon Dots for Quantum Dot-Sensitized Solar Cells

Carbon quantum dots improving photovoltaic performance of CdS quantum dot-sensitized solar cells

Graphene Quantum Dots as a Co-Sensitizer With Improving Light Absorption for Dye-Sensitized Solar Cells

The low-cost g-C3N4/CuS electrode for QDSCs prepared with low-temperature solid-state method

(Invited) Light Absorption Enhancement Using Graphene Quantum Dots in Dye-Sensitized Solar Cells and Photoelectrochemical Water Splitting

MOF-derived CuxS double-faced-decorated carbon nanosheets as high-performance and stable counter electrodes for quantum dots solar cells

Antimony tin oxide/lead selenide composite as efficient counter electrode material for quantum dot-sensitized solar cells

Synergism in carbon nanotubes and carbon-dots: counter electrode of a high-performance dye-sensitized solar cell

Carbon spheres decorated with SnS 2 nanosheets as a low-cost counter-electrode material for dye-sensitized solar cell

Ultrasonic Remove of Particle Aggregation in Carbon Based Counter Electrodes for Dye-Sensitized Solar Cells

Carbon nanotube aerogel-CoS2 hybrid catalytic counter electrodes for enhanced photovoltaic performance dye-sensitized solar cells

The photovoltaic performance of green quantum dots and dye-sensitized solar cells

N-doped Lotus Seedpods Biocarbon Hybridized with NiCo 2 S 4 as Counter Electrodes for Dye Sensitized Solar Cells

Multifunctional conjugated molecules combined with electrospun CuCoP/carbon nanofibers as a modifier of Pt counter electrode for dye-sensitized solar cells

Green Synthesis of Highly Efficient CdSe Quantum Dots for Quantum-Dots-sensitized Solar Cells