Abstract:Cellulose-rich sugarcane trash (SCT) biomass, an important agricultural residue generated in large quantities every year, was used as a potential feedstock for cellulose extraction in micro and nano form. Initially, the cellulose microfibers were isolated from the SCT by a two-step chemical treatment process (alkali pretreatment with sodium hydroxide followed by hydrogen peroxide bleaching) at different operating parameters. The microfibers were then converted into the nanoscale by acid hydrolysis. The quantification of the raw and chemically treated SCT was carried out by the Van Soest method to learn their chemical composition. Different characterisation techniques such as Fourier Transform Infrared spectroscopy (FTIR), Thermogravimetric Analysis (TGA), X-Ray Diffraction (XRD), Field Emission-Scanning Electron Microscopy (FE-SEM), and Transmission Electron Microscopy (TEM) were used for the analysis of surface functional groups, thermal stability, crystallinity index, surface morphology, and the internal structure of the raw as well as chemically treated SCT biomass respectively. The quantification results show the optimum process conditions for the alkali pretreatment as 5% (w/v) alkali (NaOH) concentration, 60 °C, and 12 h process time and for bleaching as 20% H 2 O 2 concentration, 80 °C, and 8 h process time. This produces material having 86.15% cellulose content. This indicates the effective removal of hemicellulose and lignin. For the acid hydrolysis reaction for converting cellulose microfibers into nanocrystalline cellulose, the concentration of H 2 SO 4 required was 40 wt.%, which is comparatively lower than that reported in the literature (~ 65 wt.%). The characterisation results highlight the progressive enrichment in the cellulosic groups, thermal stability, and crystallinity of the material with respect to the processing stages. There was a progressive enhancement in the crystallinity index of the sample observed with respect to the chemical treatment, with a maximum of up to 84.83% for the hydrolysed material. The XRD and TEM analysis confirms the presence of nanocrystalline cellulose (NCC) in the final hydrolysed sample.

Investigation on the Recycling of Sulfuric Acid from Pretreatment of Cellulose for Nanocellulose Preparation

Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization

Separation of Acid and Sugar in the Waste Liquid from Acid Hydrolysis for Preparing Cellulose Nanocrystals

Preparation and Characterization of Nanofibrillated Cellulose from Bamboo Fiber Via Ultrasonication Assisted by Repulsive Effect

Pretreatment of Sophora flavescens residues to produce fermentable sugars for lactic acid production: Optimization and mechanism analysis

Sustainable Production of Cellulose Nanocrystals with Sulfuric Acid Recycling Using Diffusion Dialysis and Electrodialysis

Preparation of nanocellulose in high yield via chemi-mechanical synergy

Production of Nanocellulose Using Citric Acid in a Biorefinery Concept: Effect of the Hydrolysis Reaction Time and Techno-Economic Analysis

Statistical optimization of cellulose nanocrystal from cotton cloth waste using sulfuric acid hydrolysis and response surface methodology

Comprehensive investigation of multiples factors in sulfuric acid pretreatment on the enzymatic hydrolysis of waste straw cellulose

The Influence of Pre-treatment Time and Sulfuric Acid on Cellulose Nanocrystals

Acid and Oxidative Treatment of Raw Material for the Production of Nanofibrillar Cellulose

Facile Preparation and Characteristic Analysis of Sulfated Cellulose Nanofibril via the Pretreatment of Sulfamic Acid-Glycerol Based Deep Eutectic Solvents

Effect of sulfuric residual acid on the physicochemical properties, thermal behavior, and decomposition kinetics of nitrocellulose

Process’ Optimization of Nanocrystalline Cellulose and Its Properties

Effect of cellulase on the UCST behavior of sulfobetaine zwitterionic surfactants and the cellulase recovery mechanism

Extraction of Nanocellulose from the Residue of Sugarcane Bagasse Fiber for Anti-Staphylococcus aureus (S. aureus) Application

Sugarcane trash-derived nanocrystalline cellulose: a sustainable approach with mild chemical pretreatment and comprehensive characterisation

Products of Cellulose Hydrolysis Made by Treatment of Feedstock with Concentrated Solutions of Sulfuric Acid

Efficient Cleavage of Strong Hydrogen Bonds in Sugarcane Bagasse by Ternary Acidic Deep Eutectic Solvent and Ultrasonication to Facile Fabrication of Cellulose Nanofibers

Nanocellulose from agro-industrial wastes: A review on sources, production, applications, and current challenges