Abstract:Conventionally, micro-sized irregular polyaniline (PANI) particles were synthesized by dropwise addition of the ammonium persulfate (APS) solution into the aniline (ANI) solution with mechanical stirring. By replacing the mechanical stirring with an ultrasonic irradiation, PANI nanofibers in diameters of ∼50nm and lengths of 200nm to several micrometers were prepared. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that at the early stage of polymerization, the polymers formed in both the mechanical stirred and ultrasonicated systems are in the form of nanofiber. However, with continuing of the reaction, these primary nanofibers grow and agglomerate into irregular shaped PANI particles in the mechanical stirred system, while in the case of the ultrasonic irradiation, the growth and agglomeration are effectively prevented, preserving thus the PANI nanofibers in the final product. By increasing the APS/ANI molar ratio from 0.5 to 2.5, the aspect ratios of the PANI nanofibers decreased. The PANI nanofibers exhibit higher solubility than the irregular shaped PANI particles. Although the yield, as well as the conductivity of the ultrasonic synthesized PANI nanofibers, was slightly lower than the irregular shaped PANI particles, the ultrasonic synthesis approach is one of the facile and scalable approaches in synthesizing PANI nanofibers in comparison with other ones without use of templates (e.g., the interfacial polymerization and rapid mixing polymerization). UV–Vis and Fourier transformed infrared (FTIR) spectra indicated ultrasound had no significant effect on the chemical structure of the PANI.

Preparation of Polyaniline Microplates Via A Novel Template-Free Method

Fabrication of one dimensional polyaniline nanofibers by UV-assisted polymerization in the aqueous phase.

A Very Thin Layer of NiO, Ni(OH)2 Nanosheets Arrays with Organic Functional Modification of Polyaniline

Polyaniline Self-Assembled with Dtpa: Facilely Tuned Morphology and Properties

Synthesis of PANI nanostructures with various morphologies from fibers to micromats to disks doped with salicylic acid

Soft Template Method to Synthesize Polyaniline Microtubes Doped with Methyl Orange

Polyaniline Micro-/Nanostructures: Morphology Control and Formation Mechanism Exploration

Sonochemical Synthesis of Polyaniline Nanofibers

Facile and template‐free method toward chemical synthesis of polyaniline film/nanotube structures

Self-Assembled Polyaniline Nanotubes With Rectangular Cross-Sections

Polyacetylene Nanoparticles-Based Preparation of Polyaniline Nanofibers

Self-assembly of Polyaniline: Mechanism Study

Polyaniline Nanotubes Prepared by One-Step Synergistic Polymerization of Aniline and Acrylic Acid

Oxidation−Reduction Reaction Driven Approach for Hydrothermal Synthesis of Polyaniline Hollow Spheres with Controllable Size and Shell Thickness

Alignment of Polyaniline Nanofibers on 3-D Templates: "hairy" Hollow Microspheres As High-Performance Pseudocapacitive Materials

Polyaniline nanowires on TiO2 nano/microfiber hierarchical nano/microstructures: Preparation and their photocatalytic properties

Fabrication of shape-controllable polyaniline micro/nanostructures on organic polymer surfaces: obtaining spherical particles, wires, and ribbons.

Synthesis and characterization of "hairy urchin"-like polyaniline by using β-cyclodextrin as a template

Polyaniline precipitation in aqueous medium: from bulk aggregates to nanoparticles

Formation of Polyaniline Nanofibers: A Morphological Study

Nanoscaled Polyaniline Doped with Different Dicarboxylic Acids Based on Template-Free Method