Abstract:Gifford–McMahon (GM) cryocoolers are pivotal for maintaining the temperature of MRI magnets, necessitating regular servicing for optimal performance and longevity. This study explores the geometric dimensions and shapes of superconducting magnets utilized in MRI for system cooling. The investigation demonstrates that warm-up time is contingent on heat capacity rather than geometric shapes. As a result, the design of magnets can be customized to specific shapes and sizes in accordance with favorable conditions, given that warm-up time is solely dependent on heat capacity. The primary focus is to deliberately prolong the warm-up time of the magnet relative to the GM cryocooler, consequently minimizing service intervals. Laboratory evaluations explore the use of thermal masses equivalent to MRI magnets, employing typical materials such as copper and aluminum. These masses are cooled to 4 K and then subjected to different heating powers to evaluate warm-up characteristics. Various configurations and shapes of thermal masses are numerically studied for warm-up analysis. Comparative assessments between experimental results and simulations reveal that, for cylindrical thermal masses, 80 W heating power facilitates a 76% reduction in warm-up time compared to 20 W heating across all cases. In the exploration of different geometric thermal masses, aluminum demonstrates a remarkable 35% decrease in warm-up time compared to copper. A noteworthy finding emerges, indicating that warm-up time is contingent on heat capacity rather than geometric shapes. These insights hold substantial relevance, particularly in systems with large thermal capacities, such as superconducting magnets. The study contributes valuable knowledge to the optimization of GM cryocoolers for enhanced MRI magnet performance and extended operational life.

Novel Technologies and Configurations of Superconducting Magnets for Mri

Unconventional Gradient Coil Designs in Magnetic Resonance Imaging.

Development of High Magnetic Field Magnet Technologies for the Magnetic Resonance Medical Imaging

Superconducting magnet designs and MRI accessibility: a review

High Field Superconducting Magnet Technologies for Magnetic Resonance Imaging

Magnetic, Mechanical and Thermal Modeling of Superconducting, Whole-body, Actively Shielded, 3 T MRI Magnets Wound Using MgB2 Strands for Liquid Cryogen Free Operation

Current Status in Building a Compact and Mobile HTS MRI Instrument

Technology Challenges of 14 T Whole-Body Superconducting MRI Magnets- A Target of High-Field Superconducting Magnet Technology for Large Scale Applications in Next Decade

Prospects of Superconducting Magnet Technology in the Medical Field: A New Paradigm on the Horizon?

A Homogeneous Superconducting Magnet Design Using A Hybrid Optimization Algorithm

Research on Stability of ${\rm MgB}_{2}$ Superconducting Magnet for MRI

Design of the Superconducting Main Magnet Based on Variable Density Method in Cylindrical MRI Scanner

Electromagnetic design of a 1.5T open MRI superconducting magnet

Globally Optimal Superconducting Homogeneous Magnet Design for an Asymmetric 3.0 T Head MRI Scanner

Open MRI Magnet with Iron Rings Correcting the Lorentz Force and Field Quality

Electromagnetic Design of MRI Superconducting Magnet Based on Novel Hybrid Optimization Methods

A New Design Method for Completely Open Architecture Permanent Magnet for MRI

A Novel Design Method of Passive Shimming for 0.7-T Biplanar Superconducting MRI Magnet

Actively-shielded Ultrahigh Field MRI/NMR Superconducting Magnet Design

Electromagnetic Design of 1.5 T No-Insulation REBCO Coil System Charged by Multiflux Pumps for Dedicated MRI

Thermal studies on cryocooler thermal masses from 4 K to 300 K for MRI applications