Abstract:Ultra-high performance concrete (UHPC) has a high self-healing capacity and is prone to bursting after exposure to high temperatures due to its characteristics. This work evaluates the damage and improvement of UHPC with coarse aggregates through mechanical properties (compressive strength and ultrasonic pulse velocity), transport properties (water absorption and a chloride diffusion test), and micro-properties such as X-ray diffraction (XRD), Mercury intrusion porosimetry (MIP), and Scanning electronic microscopy (SEM). The result demonstrates that polypropylene (PP) fibers are more suitable for high temperature tests than polyacrylonitrile (PAN) fibers. The result shows that 400 °C is the critical temperature point. With the increase in temperature, the hydration becomes significant, and the internal material phase changes accordingly. Although the total pore volume increased, the percentage of various types of pores was optimized within 400 °C. The mass loss gradually increased and the ultrasonic pulse velocity gradually decreased. While the compressive strength first increased and then decreased, and the increase occurred within 25–400 °C. As for the transport properties, the chloride migration coefficient and capillary absorption coefficient both increased dramatically due to the higher sensitivity to temperature changes. The results of the property improvement test showed that at temperatures above 800 °C, the compressive strength recovered by more than 65% and the ultrasonic pulse velocity recovered by more than 75%. In terms of transport properties, compared to the results before self-healing, the chloride migration coefficient decreased by up to 59%, compared with 89% for the capillary absorption coefficient, after self-healing at 800 °C. With respect to the enhancement effect after exposure to high temperatures, the environment of a 5% Na2SO4 solution was not as good as the clean water environment. The corresponding changes in microstructure during the high temperatures and the self-healing process can explain the change in the pattern of macroscopic properties more precisely.

Effects of Polypropylene and Steel Fibers on Permeability of Ultra-high Performance Concrete at Hot State

Influence of Aggregate Size and Inclusion of Polypropylene and Steel Fibers on the Hot Permeability of Ultra-High Performance Concrete (UHPC) at Elevated Temperature

Effect of Aggregate Size and Inclusion of Polypropylene and Steel Fibers on Explosive Spalling and Pore Pressure in Ultra-High-performance Concrete (UHPC) at Elevated Temperature

Synergistic Effects of Hybrid Polypropylene and Steel Fibers on Explosive Spalling Prevention of Ultra-High Performance Concrete at Elevated Temperature

Effects of geometry and fraction of polypropylene fibers on permeability of ultra-high performance concrete after heat exposure

Effect of polymer fibers on pore pressure development and explosive spalling of ultra-high performance concrete at elevated temperature

Effect of Lateral Restraint and Inclusion of Polypropylene and Steel Fibers on Spalling Behavior, Pore Pressure, and Thermal Stress in Ultra-High-performance Concrete (UHPC) at Elevated Temperature

Fire performance of ultra-high performance concrete: effect of fine aggregate size and fibers

Effects of Heating Followed by Water Quenching on Strength and Microstructure of Ultra-High Performance Concrete

Combined effect of flax fibers and steel fibers on spalling resistance of ultra-high performance concrete at high temperature

Study of Ultra-High Performance Concrete Mechanical Behavior under High Temperatures

Experimental Study on the Effect of Polypropylene Fiber on Compressive Strength and Fracture Properties of High-Strength Concrete after Elevated Temperatures

Combined effect of natural fibre and steel fibre on the thermal-mechanical properties of UHPC subjected to high temperature

Mechanical and Thermal Properties of UHPC Exposed to High-Temperature Thermal Cycling

Influence of High Temperatures on the Mechanical and Microstructural Properties of Hybrid Steel-Basalt Fibers Based Ultra-High-performance Concrete (UHPC)

Transport Properties and Resistance Improvement of Ultra-High Performance Concrete (UHPC) after Exposure to Elevated Temperatures

Effect Of Post-Fire Curing And Silica Fume On Permeability Of Ultra-High Performance Concrete

Effect of Temperature on Thermal Properties of Ultrahigh-Performance Concrete

Effect of Fibers on High-Temperature Mechanical Behavior and Microstructure of Reactive Powder Concrete

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites