Abstract:By using both the pseudoelasticity and strain self-sensing ability of shape memory alloy (SMA) material, an innovative smart SMA-based damper can be developed. This damper has comprehensive energy dissipation and strain self-sensing abilities (i.e., electric resistance versus applied strain relationship) simultaneously. Before shaking table test on a building installed with such SMA-based dampers, the tests were conducted on the hysteresis stress-strain-electric resistance relationship of SMA wires (diameter 1.2 mm). These tests were carried out under sinusoidal excitations with different loading frequencies at different ambient temperatures, to investigate the energy dissipation ability and strain self-sensing property of SMA wires. The sensitivity coefficient of electric resistance versus applied strain of the SMA wires was identified to be 5.948 from the test results, which is larger than that of the conventional strain gage and is independent of loading frequency. The experimental results indicate that the pseudoelastic hysteresis loops of the SMA wires are dependent on loading frequencies, particularly in the case of lower frequency. Further tests aimed at revealing the mechanism of the strain rate dependence of pseudoelasticity of SMA wire were conducted. The results indicate that the phase transformation temperature is dependent on strain rate, i.e., both the martensitic phase transformation finish temperature and the austenitic phase transformation start temperature decrease with increasing of strain rate. Based on the results of these tests, a one-dimensional strain rate dependent constitutive model of SMA wires was developed. This model predicts pseudoelastic behavior of SMA under various loading frequencies. Finally, a numerical simulation using the proposed model was performed, and the simulated pseudoelastic hysteresis loops agree well with test results presented not only by writers but also by other researchers.

A NOVEL SELF-CENTERING ENERGY DISSIPATION DEVICE WITH SHAPE MEMORY ALLOYS CONSIDERING TEMPERATURE EFFECTS

Multifactor Experimental Investigation of the Mechanical Performance of a Shape Memory Alloy‐based Self‐centering‐energy‐dissipation Device

A Thermomechanically Coupled Finite Deformation Constitutive Model for Shape Memory Alloys Based on Hencky Strain

11.65: An axial type self-centering energy dissipation device with shape memory alloy for seismic mitigation

Modeling and Simulation of SMA Wire Actuator

Topology optimization for energy dissipation structures based on shape memory alloys

A Type of Shape Memory Alloy Damper: Design, Experiment and Numerical Simulation

INVESTIGATION OF MECHANICAL FEATURES OF ENERGY DISSIPATION SPRING MADE OF SHAPE MEMORY ALLOY

Experimental Investigation and Numerical Evaluation of an Innovative Shape Memory Alloy Damper

Micromechanical Modelling of Shape Memory Alloy Composites

SMA superelastic damping

EXPERIMENTAL AND NUMERICAL ANALYSIS OF AN INNOVATIVE RE-CENTERING SHAPE MEMORY ALLOYS-SHEARING LEAD DAMPER

Analysis of thermo-mechanical behavior of shape memory alloys

Design and study on novel shape memory alloy isotator

Strain Self-Sensing Property and Strain Rate Dependent Constitutive Model of Austenitic Shape Memory Alloy: Experiment and Theory

Tensile Test of Shape Memory Alloys and Numerical Simulation

Shape Memory Alloys Applied to Automotive Adaptive Aerodynamics

Finite element modeling of the damping capacity and vibration behavior of cellular shape memory alloy

Seismic Vibration Control of Structures Using Superelastic Shape Memory Alloys

A Review of Applications and Research of Shape Memory Alloys in Civil Engineering

Experimental and Theoretical Study on Two Types of Shape Memory Alloy Devices