Abstract:This study investigated the effects of citric acid on the properties of edible tapioca starch films plasticised with glycerol. The study demonstrated that the physicochemical properties of tapioca starch‐based films could be modified by the incorporation of citric acid and used for various food and pharmaceutical packaging applications. Summary This study investigated the effects of citric acid on the properties of edible tapioca starch films plasticised with glycerol. These films were formed using 5% tapioca (w/w of water); 1%, 3%, 5%, 7% and 9% citric acid (w/w of starch); and 2.2% glycerol (w/w of water). Native starch films formed using 5% tapioca and 2.2% glycerol were used as the control. The properties tested included the degree of crosslinking, thermal stability, crystallinity and mechanical properties. These were evaluated using Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR‐FTIR), X‐Ray diffraction (XRD), thermal gravimetric analysis (TGA) and tensile profile analysis (TPA). The FTIR results provided information about the nature of the crosslinking in the films, while TGA showed that increasing the citric acid concentration reduced the physical decomposition temperature of the materials. Films containing 9% citric acid had the highest degree of esterification and crosslinking, while those containing 7% citric acid had the lowest heat‐related weight loss that correlated with the degree of crosslinking. The weight loss among all six samples was the greatest in the temperature range 260 °C–350 °C where a total of 60% weight loss occurred. The XRD results showed that films containing 3% citric acid had the lowest crystallinity while the native starch films had the highest crystallinity. The TPA analyses showed that films containing 5% citric acid had the greatest influence on improving the tensile strength and elastic modulus, while also having the best impact on lowering the elongation. Tensile strength values recorded for films containing 0%, 1%, 3%, 5%, 7% and 9% citric acid were 5.327, 7.813, 8.688, 12.855, 14.549 and 11.614 MPa. Similarly, when citric acid concentration increased from 3% to 5%, the elastic modulus significantly increased from 831.058 to 2255.691 MPa. This study demonstrated that the physicochemical properties of tapioca starch‐based films could be modified by the incorporation of citric acid.

The Effects of Citric Acid on the Properties of Thermoplastic Starch Plasticized by Glycerol

Influence of Citric Acid on the Properties of Glycerol-Plasticised Cornstarch Extrusion Blends

The influence of citric acid on the properties of thermoplastic starch/linear low-density polyethylene blends

Influence of Citric Acid on the Properties of Glycerol-plasticized dry Starch (DTPS) and DTPS/Poly(lactic acid) Blends

Regulating the Physicochemical, Structural Characteristics and Digestibility of Potato Starch by Complexing with Different Phenolic Acids.

Preparation of thermoplastic starch with comprehensive performance plasticized by citric acid

Characterization of Citric Acid/glycerol Co-Plasticized Thermoplastic Starch Prepared by Melt Blending

The effect of citric acid concentrations on the mechanical, thermal, and structural properties of starch edible films

Synergistic plasticization and anti-aging effect of hyperbranched poly(1,4-butanediol citrate)/glycerol on corn starch

Crosslinking of Starch Using Citric Acid

Improving thermal stability of starches native cross-linked with citric acid as a compatibilizer for thermoplastic starch/polylactic acid blends

Effects of Citric Acid on the Properties of Starch/Polyvinyl Alcohol Composite Films by Blow Extrusion Process

The Effect of Citric Acid on Physicochemical Properties of Hydrophilic Carboxymethyl Starch-Based Films

Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films

Properties of biodegradable citric acid-modified granular starch/thermoplastic pea starch composites

The effect of citric acid on the structural properties and cytotoxicity of the polyvinyl alcohol/starch films when molding at high temperature

Aliphatic Amidediol and Glycerol as a Mixed Plasticizer for the Preparation of Thermoplastic Starch

Effect of Sodium Citrate/polyethylene Glycol on Plasticization and Retrogradation of Maize Starch.

Effect of different proportions of glycerol and D-mannitol as plasticizer on the properties of extruded corn starch

Effect of branched 1,4-butanediol citrate oligomers with different molecular weights on toughness and aging resistance of glycerol plasticized starch

Influences of the Glycerol Content on the Structure and Properties of Thermoplastic Starch