Abstract:The emerging photovoltaic technology, namely perovskite photovoltaics, follows a style to the blooming flower with superficial prosperity described by the ancient poet Yuxi Liu. Metal-halide perovskite has become one of the most promising photovoltaic materials for thin-film solar-cell applications, mainly due to its exellent visible light capture capability, large diffusion coefficients and long diffusion lengths of charge carriers (both electrons and holes). The reported power conversion efficiency of laboratory produced perovskite solar cells (PSCs) has exceeded 25%. However, this value was only achieved for devices of less than 0.1 cm(2)dimensions, and decreases significantly with the increase in area (for example, down to 11.6% for a device area of similar to 800 cm(2), showing the issues with the scalability). In PSCs, the electron transport layer (ETL) has to perform two essential functions, which are related: (i) to collect and transfer charges after the injection of electrons from the perovskite light harvester; and (ii) to block the backflow of holes, thus realizing effective charge separation and suppressing charge carrier recombination. However, there are several critical issues associated with the ETLs which limit the further development of the PSCs. For example, the experimentally obtained open-circuit voltages in PSCs are typically much lower compared to the theoretical voltage limit with their optical bandgaps between 1.59 and 1.63 eV. This is mainly attributed to inefficient charge transport in the PSCs due to inhomogeneous charge accumulation and serious interfacial recombination at the interfaces between the ETL and the perovskite active layer. We scan recent developments of ETLs in PSCs, and discuss design methodologies, mechanisms, processing and characterization of new types of ETLs. High power conversion efficiency with large open-circuit voltages/photo-currents could be achieved through designing materials and microstructures for high-quality ETLs with a high electron mobility, high electrical conductivity and pinhole-free film morphology. It is crucial to balance the charge diffusion processes in the respective charge collective layers of PSCs as the interfaces between the ETLs and perovskites along with their interfacial structures play key roles in achieving new solid-state mesoscopic solar cells optimized open circuit voltages and output photocurrents.

Record Photocurrent Density over 26 Ma Cm−2 in Planar Perovskite Solar Cells Enabled by Antireflective Cascaded Electron Transport Layer

All-inorganic, Hole-Transporting-layer-free, Carbon-Based CsPbIBr2 Planar Perovskite Solar Cells by a Two-Step Temperature-Control Annealing Process

Highly Efficient Perovskite Solar Cells with Light Management of Surface Antireflection

Laser Derived Electron Transport Layers with Embedded p‐n Heterointerfaces Enabling Planar Perovskite Solar Cells with Efficiency over 25%

High-efficiency (>20%) planar carbon-based perovskite solar cells through device configuration engineering

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

High-Performance Simple-Structured Planar Heterojunction Perovskite Solar Cells Achieved by Precursor Optimization.

Interface Engineering for Efficient ETL-free Perovskite Solar Cells Via Self-Assembled Bifunctional Monolayer

Efficient and Stable Solution-Processed Planar Perovskite Solar Cells Via Contact Passivation

Efficient Planar Perovskite Solar Cells with Low-Temperature Atomic Layer Deposited TiO2 Electron Transport Layer and Interfacial Modifier

Efficient planar heterojunction perovskite solar cells with enhanced FTO/SnO2 interface electronic coupling

Perovskite Solar Cells with 18.21% Efficiency and Area over 1 Cm(2) Fabricated by Heterojunction Engineering

Advances in design engineering and merits of electron transporting layers in perovskite solar cells

Interface studies of the planar heterojunction perovskite solar cells

NaCl-passivated and Na+-doped Tin Oxide Electron Transport Layers Enable Highly Efficient Planar Perovskite Solar Cells

Room-temperature processed TiO2 to construct composite electron transport layers for efficient planar perovskite solar cells

Novel Perovskite Solar Cell Architecture Featuring Efficient Light Capture and Ultrafast Carrier Extraction

Enhanced Photovoltage for Inverted Planar Heterojunction Perovskite Solar Cells

24.8%-efficient planar perovskite solar cells via ligand-engineered TiO2 deposition

Regulating Charge Carrier Extraction and Transport with Dual-interface Modification for Efficient Perovskite Solar Cells

Stable Electron-Transport-Layer-Free Perovskite Solar Cells with over 22% Power Conversion Efficiency