Abstract:Lithium sulfur (Li-S) batteries have been intensively concerned in recent years as next generation Li batteries1. Compared with state-of-the-art Li-ion batteries, Li-S batteries own ultrahigh theoretical capacity and energy density, which are considered as most promising candidates applied to electric vehicles and hybrid electric vehicles. However, insulation of sulfur and dissolution of polysulfides are two main issues in sulfur cathodes which hinder the cycle life and application safety of Li-S batteries. To overcome these issues, developing conductive hosts and coating materials are prevailing approaches to improve the performance of Li-S batteries. Herein, we report molecular layer deposited (MLD) alucone coating and nanoscale metal organic framework derived carbon (MOF-C) confined sulfur cathodes in Li-S batteries. Surface coating with carbon or metal oxides has been proven to be a promising approach towards mitigating the shuttle effect in Li-S batteries. An ideal coating material should both cover on based material completely to prevent sulfur migration and also allow Li-ions and electrons transferring through smoothly. Based on these requirements, atomic and molecular layer deposition (ALD and MLD) are ideal technique to synthesize ultrathin and conformal coatings due to the self-limiting nature2 , 3. For the first time, we demonstrate that an MLD alucone coating directly on sulfur electrodes can dramatically improve the cycling stability and capability of Li-S cells. Furthermore, the alucone coated sulfur cathode delivers a discharge capacity of 710 mAh g-1, which is over two times higher than the bare sulfur cathode after 100 cycles4. The alucone coating demonstrated long durability during cell cycling, which explores a new direction in the protection of sulfur cathodes. Porous structured materials are prevailing in sulfur cathode to confine sulfur molecule in host materials. Herein, we developed a new carbon family, metal organic framework derived carbon materials (MOF-Cs) with tunable porous structure via in-situ ammonia treatment5. The ammonia treated MOF-C as carbon host shows an impressive improvement on sulfur cathodes, which performed twice higher discharge capacity retention than that of the pristine MOF-C. This research sheds light to design MOF-C materials with controlled nanostructure not only for Li–S batteries, but also for expanded applications in different energy storage systems. References 1 Bruce, P. G., Freunberger, S. A., Hardwick, L. J. & Tarascon, J. M. Li-O2 and Li-S batteries with high energy storage. Nature materials11, 19-29, (2012). 2 Meng, X., Yang, X. Q. & Sun, X. Emerging applications of atomic layer deposition for lithium-ion battery studies. Adv Mater24, 3589-3615, (2012). 3 Li, X. et al. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application. Energy & Environmental Science7, 768, (2014). 4 Li, X., Lushington, A., Liu, J., Li, R. & Sun, X. Superior stable sulfur cathodes of Li-S batteries enabled by molecular layer deposition. Chem Commun (Camb)50, 9757-9760, (2014). 5 Li, X. et al. Tunable porous structure of metal organic framework derived carbon and the application in lithium–sulfur batteries. J Power Sources 302, 174-179, (2016). Figure 1

Atomic‐Layer‐Deposited Amorphous MoS2 for Durable and Flexible Li–O2 Batteries

Single‐Atom Catalyst Induced Amorphous Li2O2 Layer Enduring Lithium–Oxygen Batteries with High Capacity

MoO2 nanoparticles/carbon textiles cathode for high performance flexible Li-O2 battery

Self-supported MoO2/MoS2 Nano-Sheets Embedded in a Carbon Cloth As a Binder-Free Substrate for High-Energy Lithium–sulfur Batteries

A high-performance oxygen electrode for Li–O2 batteries: Mo2C nanoparticles grown on carbon fibers

Three-Dimensional Carbon-Supported MoS2 with Sulfur Defects As Oxygen Electrodes for Li-O2 Batteries

Hybridization of Sulfur-Defective MoS2 and Holey Expanded Graphite for a Long Cycling Lithium Oxygen Battery Cathode

Homogeneous In‐Plane Lattice Strain Enabling d‐Band Center Modulation and Efficient d–π Interaction for an Ag2Mo2O7 Cathode Catalyst With Ultralong Cycle Life in Li‐O2 Batteries

Molecular Scale Coating and Nanoscale Carbon Cage Confined Sulfur Cathodes Applied in Lithium Sulfur Batteries

MoS2/Ti2CT2 (T = F, O) Heterostructures As Promising Flexible Anodes for Lithium/Sodium Ion Batteries

Flexible Li–CO2 Batteries with Boosted Reaction Kinetics and Cyclelife Enabled by Heterostructured Mo3N2@TiN Cathode and Interface‐protected Li Anode

Dual Regulation Mechanism of MoS2/MoO3 Heterostructure for Polysulfide and Volume Effect Enables Stable and Durable Lithium Storage

TinO2n-1/MXene Hierarchical Bifunctional Catalyst Anchored on Graphene Aerogel toward Flexible and High-Energy Li-S Batteries

MOF derived MoP nanorods decorated N-doped thin carbon layer as robust lithiophilicity and sulfiphilicity nanoreactor for high-performance Li-S batteries

Strongly Coupled Carbon Nanosheets/Molybdenum Carbide Nanocluster Hollow Nanospheres for High-Performance Aprotic Li-O 2 Battery.

Interfacial Reinforcement Structure Design Towards Ultrastable Lithium Storage in MoS2-based Composited Electrode

Building flexibly porous conductive skeleton inlaid with surface oxygen-dominated MXene as an amphiphilic nanoreactor for stable Li-S pouch batteries

Boundary‐Free Metal–Organic Framework Glasses Enable Highly Stable All‐Solid‐State Lithium–Oxygen Battery

Atomic Ni-catalyzed Cathode and Stabilized Li Metal Anode for High-Performance Li–O2 Batteries

A Composite of Carbon-Wrapped Mo2c Nanoparticle and Carbon Nanotube Formed Directly on Ni Foam As A High-Performance Binder-Free Cathode for Li-O-2 Batteries

Anomalous Li Storage Capability in Atomically Thin Two-Dimensional Sheets of Nonlayered MoO2