Abstract:This study developed a non-enzymatic electrochemical sensor for measuring xanthine using CuO nanostructures made from sugar molasses. The influence of sugar molasses on the surface morphology, crystallization, and optical properties of CuO nanostructures have been investigated during low-temperature aqueous chemical growth method. The influence of different amounts of sugar molasses such as 1 mL (sample 1) and 2 mL (sample 2) on the shape, optical, and crystalline properties of CuO nanostructures was evaluated. The monoclinic phase of sugar molasses CuO nanostructures was confirmed and heterogeneity in the shape orientation was also observed. The optical characterization has revealed a decrease in the optical band gap from 3.36 eV, 2.90 eV, and 2.36 eV for the pure CuO, sample 1, and sample 2, respectively. The proposed CuO nanostructures were found highly active toward electrochemical non-enzymatic detection of xanthine in phosphate buffer solution of pH 7.0. The CuO nanostructures prepared with 1 mL of sugar molasses (sample 1) were observed highly efficient toward non-enzymatic xanthine detection and dynamic linear ranges for various xanthine concentrations were estimated using cyclic voltammetry (CV) and chronoamperometry (CA). Both CV and CA have revealed the dynamic linear range of proposed xanthine sensor from 0.0001 to 0.01 mM and a limit of detection (LOD) of 0.00001 mM. The presented xanthine sensor was evaluated by different sensor evaluation parameters such as selectivity, stability, reproducibility, and the observed performance of sensor was found highly satisfactory. The CuO nanostructures prepared with sugar molasses (sample 1) has shown improved performance due to its high number of active sites, its favorable morphology, its tunable optical band gap, and its fast charge transfer rate at the interface. The CuO nanostructures (sample 1) exhibited charge transfer resistance of 7.72 Ohms and electrochemical active surface area of 0.00202 μF cm −2 . Significantly, CV experiments were conducted under real-life conditions to detect xanthine Taken together, the combined findings of this work clearly emphasize that sugar molasses-derived CuO nanostructures provide enhanced electrocatalytic properties, thereby offering potential use in diverse biomedical, food, and energy storage-related applications.

Sensitive and Selective Xanthine Amperometric Sensors Based on Calcium Carbonate Nanoparticles

Fabrication of Amperometric Xanthine Biosensors Based on Direct Chemistry of Xanthine Oxidase

A selective and sensitive D-xylose electrochemical biosensor based on xylose dehydrogenase displayed on the surface of bacteria and multi-walled carbon nanotubes modified electrode.

Co-immobilization of glucose oxidase and xylose dehydrogenase displayed whole cell on multiwalled carbon nanotube nanocomposite films modified electrode for simultaneous voltammetric detection of D-glucose and D-xylose.

Monodispersed gold nanoparticles entrapped in ordered mesoporous carbon/silica nanocomposites as xanthine oxidase mimic for electrochemical sensing of xanthine

Amperometric detection of hypoxanthine and xanthine by enzymatic amplification using a gold nanoparticles-carbon nanohorn hybrid as the carrier.

A Non-Enzymatic Voltammetric Xanthine Sensor Based on the Use of Platinum Nanoparticles Loaded with a Metal-Organic Framework of Type MIL-101(Cr). Application to Simultaneous Detection of Dopamine, Uric Acid, Xanthine and Hypoxanthine

Amperometric on-line sensor for continuous measurement of hypoxanthine based on osmium-polyvinylpyridine gel polymer and xanthine oxidase bienzyme modified glassy carbon electrode

Development Of Amperometric Biosensor For Glucose Based On A Novel Attractive Enzyme Immobilization Matrix: Calcium Carbonate Nanoparticles

Development of a High Analytical Performance-Xanthine Biosensor Based on Layered Double Hydroxides Modified-Electrode and Investigation of the Inhibitory Effect by Allopurinol.

Xanthine oxidase/laponite nanoparticles immobilized on glassy carbon electrode: direct electron transfer and multielectrocatalysis.

Disposable amperometric biosensors based on xanthine oxidase immobilized in the Prussian blue modified screen-printed three-electrode system

Biosensor for detection of hypoxanthine based on xanthine oxidase immobilized on chemically modified carbon paste electrode

Amperometric Sensor for Glucose and Hypoxanthine Based on a PdIrO(2) Modified Electrode by a Co-Crosslinking Bienzymic System.

Biocompatible Phosphonic Acid-Functionalized Silica Nanoparticles for Sensitive Detection of Hypoxanthine in Real Samples.

Amperometric Study of Au‐Colloid Function on Xanthine Biosensor Based on Xanthine Oxidase Immobilized in Polypyrrole Layer

Pt‐Pd Bimetallic Nanoparticles Decorated Nanoporous Graphene As a Catalytic Amplification Platform for Electrochemical Detection of Xanthine

Utilizing CuO nanostructures derived from sugar molasses for the detection of xanthine

Xanthine Biosensor Based on Didodecyldimethylammonium Bromide Modified Pyrolytic Graphite Electrode

Amperometric Biosensor for Hypoxanthine Based on Immobilized Xanthine Oxidase on Iron (iii)meso‐tetraphenylporphyrin Nanoparticles Modified Glassy Carbon Electrode

Non-enzymatic Xanthine Sensor of Heteropolyacids Doped Ferrocene and Reduced Graphene Oxide Via One-Step Electrodeposition Combined with Layer-by-layer Self-Assembly Technology