Abstract:A three-dimensional compressible Direct Numerical Simulation (DNS) analysis has been carried out for head-on quenching of a statistically planar stoichiometric methane-air flame by an isothermal inert wall. A multi-step chemical mechanism for methane-air combustion is used for the purpose of detailed chemistry DNS. For head-on quenching of stoichiometric methane-air flames, the mass fractions of major reactant species such as methane and oxygen tend to vanish at the wall during flame quenching. The absence of OH at the wall gives rise to accumulation of carbon monoxide during flame quenching because CO cannot be oxidised anymore. Furthermore, it has been found that low-temperature reactions give rise to accumulation of HO 2 and H 2 O 2 at the wall during flame quenching. Moreover, these low temperature reactions are responsible for non-zero heat release rate at the wall during flame-wall interaction. In order to perform an in-depth comparison between simple and detailed chemistry DNS results, a corresponding simulation has been carried out for the same turbulence parameters for a representative single-step Arrhenius type irreversible chemical mechanism. In the corresponding simple chemistry simulation, heat release rate vanishes once the flame reaches a threshold distance from the wall. The distributions of reaction progress variable c and non-dimensional temperature T are found to be identical to each other away from the wall for the simple chemistry simulation but this equality does not hold during head-on quenching. The inequality between c (defined based on CH 4 mass fraction) and T holds both away from and close to the wall for the detailed chemistry simulation but it becomes particularly prominent in the near-wall region. The temporal evolutions of wall heat flux and wall Peclet number (i.e. normalised wall-normal distance of T = 0.9 isosurface) for both simple and detailed chemistry laminar and turbulent cases have been found to be qualitatively similar. However, small differences have been observed in the numerical values of the maximum normalised wall heat flux magnitude Φ max L and the minimum Peclet number ( P e min ) L obtained from simple and detailed chemistry based laminar head-on quenching calculations. Detailed explanations have been provided for the observed differences in behaviours of Φ max L and ( P e min ) L . The usual Flame Surface Density (FSD) and scalar dissipation rate (SDR) based reaction rate closures do not adequately predict the mean reaction rate of reaction progress variable in the near-wall region for both simple and detailed chemistry simulations. It has been found that recently proposed FSD and SDR based reaction rate closures based on a-priori DNS analysis of simple chemistry data perform satisfactorily also for the detailed chemistry case both away from and close to the wall without any adjustment to the model parameters.

Electrical Characteristics of Laminar Propane Flame During Head-on Quenching

Electrical aspects of flame quenching

Local Flame And Flow Properties Of Propagating Premixed Turbulent Flames During Light-Round Process In A Micca-Type Annular Combustor

A Direct Numerical Simulation Study of Flame Structure and Stabilization of an Experimental High Ka CH4/air Premixed Jet Flame

Strain Rate Effects on Head-on Quenching of Laminar Premixed Methane-air Flames

An Experimental Study on the Effect of DC Electric Field on Impinging Flame

Direct Numerical Simulation of Head-On Quenching of Statistically Planar Turbulent Premixed Methane-Air Flames Using a Detailed Chemical Mechanism

Deformation Study of Lean Methane-Air Premixed Spherically Expanding Flames under a Negative Direct Current Electric Field

Effects of Direct-Current (dc) Electric Fields on Flame Propagation and Combustion Characteristics of Premixed Ch4/O-2/N-2 Flames

Laminar Combustion Characteristics of Premixed Shale Gas and Air Flames

Fire Extinguishing Performance Evaluation of the Downward Water Mist to Methane-Air Premixed Laminar Flame

Effects of Electrode Configurations on the Combustion Characteristics of Premixed Methane-Air Flames

Experimental and numerical studies on electric field distribution of a premixed stagnation flame under DC power supply

Effects of Electric Field Distribution on Premixed Expanding Flames of CH4/O2/N2

Influence of Preheating and Burner Geometry on Modeling the Attachment of Laminar Coflow CH4/air Diffusion Flames

Effects of Positive High-Voltage on Flame Propagation and Combustion Characteristics of Lean Premixed CH4/O2/N2 Flames

Experimental Study of Positive and Negative DC Electric Fields in Lean Premixed Spherically Expanding Flames

Experimental Study of Lean Premixed CH4/N2/O2 Flames under Low-Frequency Alternating-Current Electric Fields

Effect of DC electric field on laminar premixed spherical propagation flame at elevated pressures up to 0.5 MPa

Effects of Electric Field Intensity and Distribution on Flame Propagation Speed of CH4/O2/N2 Flames

Effect of Low-Frequency Alternating-Current Electric Field Parameters on Laminar and Turbulent Flames of CH4/air Mixture