Abstract:Solid oxide electrolysis cell (SOEC) is a promising energy conversion device for the efficient conversion of CO2 into valuable chemicals by using renewable energy sources. Fe-based perovskite oxides are highly active for CO2 electrochemical reduction as fuel electrodes in SOECs. Herein, high valence cations doped La0.6Sr0.4FeO3-δ oxides (La0.6Sr0.4FeO3-δ, La0.6Sr0.4Fe0.9Sc0.1O3-δ, La0.6Sr0.4Fe0.9Ta0.1O3-δ, La0.6Sr0.4Fe0.9W0.1O3-δ) are used as fuel electrodes in SOECs for CO2 electrolysis, and the crystal structure, electrical conductivity, chemical surface exchange coefficient (K chem), chemical bulk diffusion coefficient (D chem) and electrolysis performance are investigated for CO2 electrolysis. In addition, we determine the electrochemical processes on half cells and single cells with La0.6Sr0.4FeO3-δ series fuel electrodes by distribution of relaxation times (DRT) analysis, respectively. The results show that W-doping introduces more highly oxidative oxygen species O2 2−/O− and decreases the activation energy of lattice oxygen diffusion, thus accelerating the oxygen ion diffusion kinetics. The value of D chem for La0.6Sr0.4Fe0.9W0.1O3-δ reaches to 4.671 × 10−4cm2 S−1 at 800 °C, and this value is 3.8 times than that of La0.6Sr0.4FeO3-δ (1.216 × 10−4cm2 S−1). DRT analysis indicates the different rate-limiting steps for CO2 reduction reaction (CO2RR) on half cells and single cells, which are the dissociation of carbonate intermediate process on half cells, and the exchange and diffusion of oxygen ions process on single cells. W-doping remarkably improves the oxygen ion transport property, thus enhancing the single cell performance for CO2 electrolysis. The single cell with La0.6Sr0.4Fe0.9W0.1O3-δ fuel electrode demonstrates a high current density of 1.48 A cm−2 at 800 °C and 1.5 V, with the polarization resistance (Rp) of 0.527 Ω cm2 at open circuit voltage (OCV). Meanwhile, the single cell exhibits good stability for 50 h at an applied voltage of 1.2 V. This work reveals the difference in electrochemical processes on half cells and single cells, and provides a strategy to accelerate the CO2RR kinetics of La0.6Sr0.4FeO3-δ-based materials.

Electrochemical Performance of La0.3Sr0.7Ti0.3Fe0.7O3-δ/CeO2 Composite Cathode for CO2 Reduction in Solid Oxide Electrolysis Cells

Efficient CO2 Electroreduction on a Solid Oxide Electrolysis Cell with La0.6Sr0.4Co0.2Fe0.8O3−δ-Gd0.2Ce0.8O2-δ Infiltrated Electrode

Composite Fuel Electrode La(0.2)Sr(0.8)TiO(3-δ)-Ce(0.8)Sm(0.2)O(2-δ) for Electrolysis of CO2 in an Oxygen-Ion Conducting Solid Oxide Electrolyser.

Enhancing the CO2 Electrolysis Performance by Ce Doped La0⋅7Sr0⋅3Fe0⋅9Ni0⋅1O3-δ Electrode in Symmetric Solid Oxide Electrolysis Cell

(La0.75Sr0.25)0.95(Cr0.5Mn0.5)O3-δ-Ce0.8Gd0.2O1.9 scaffolded composite cathode for high temperature CO2 electroreduction in solid oxide electrolysis cell

The electrochemical performance and CO2 reduction mechanism on strontium doped lanthanum ferrite fuel electrode in solid oxide electrolysis cell

Interface Engineering of La0.6Sr0.4Co0.2Fe0.8O3−δ/Gd0.1Ce0.9O1.95 Heterostructure Oxygen Electrode for Solid Oxide Electrolysis Cells with Enhanced CO2 Electrolysis Performance

Direct CO2 Electrolysis on Symmetric La0.8Sr0.2Cr0.5Fe0.5O3−δ -Zr0.84y0.16o2−δ Electrode-Supported Solid Oxide Electrolysis Cells

Enhancing CO2 Electrolysis Performance with Vanadium-Doped Perovskite Cathode in Solid Oxide Electrolysis Cell

In situ exsolved Fe nanoparticles enhance the catalytic performance of perovskite cathode materials in solid oxide electrolytic cells

Fe-Doped Ceria-Based Ceramic Cathode for High-Efficiency CO2 Electrolysis in Solid Oxide Electrolysis Cell

Efficient Electrolysis of CO2 in Symmetrical Solid Oxide Electrolysis Cell with Highly Active La0.3Sr0.7Fe0.7Ti0.3O3 Electrode Material

Mixed-Conductor Sr2fe1.5mo0.5o6-Delta As Robust Fuel Electrode For Pure Co2 Reduction In Solid Oxide Electrolysis Cell

Enhanced oxygen bulk diffusion of La0.6Sr0.4FeO3-δ fuel electrode by high valence transition metal doping for direct CO2 electrolysis in solid oxide electrolysis cells

Symmetrical La3+-doped Sr2Fe1.5Ni0.1Mo0.4O6-δ Electrode Solid Oxide Fuel Cells for Pure CO2 Electrolysis

Direct Electrolysis Of Co2 In Symmetrical Solid Oxide Electrolysis Cell Based On La0.6sr0.4fe0.8ni0.2o3-Delta Electrode

Direct CO<sub>2</sub> Electrolysis on Symmetric La<sub>0.8</sub>Sr<sub>0.2</sub>Cr<sub>0.5</sub>Fe<sub>0.5</sub>O<sub>3−δ </sub>-Zr<sub>0.84</sub>Y<sub>0.16</sub>O<sub>2−δ </sub> Electrode-Supported Solid Oxide Electrolysis Cells

Hollow La0.6Sr0.4Ni0.2Fe0.75Mo0.05O3-δ electrodes with exsolved FeNi3 in quasi-symmetrical solid oxide electrolysis cells for direct CO2 electrolysis

Robust Ni-doped Ruddlesden-popper (La,Sr)Fe1-xNixO4+δ oxide as solid oxide cells fuel electrode for CO2 electrolysis

Sr(Ti0·3Fe0.7)O3−δ-based Perovskite with In-Situ Exsolved Fe–Ru Nanoparticles: A Highly Stable Fuel Electrode Material for Solid Oxide Electrochemical Cells with Efficient Electrocatalytic CO2 Reduction Ability and Preferential Selectivity

An Efficient Symmetrical Solid Oxide Electrolysis Cell with LSFM-based Electrodes for Direct Electrolysis of Pure CO2