Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Comparison Between Dew-Retted and Enzyme-Retted Flax Fibers As Reinforcing Material for Composites

A Comparison of Flax Shive and Extracted Flax Shive Reinforced PP Composites

Morphological modification of the technical flax fibre bundles to improve the longitudinal tensile properties of flax fibre reinforced epoxy composites

Chemical and Mechanical Properties Studies of Chinese Linen Flax and Its Composites

Performance of Hybrid Composites Fabricated by Flax/Hemp Fibers Using Wire Mesh Plain Weaving Techniques

Characterization and Properties of Alkali Treated Flax

Effect of enzymatic treatment of flax on chemical composition and the extent of fiber separation

Enhancement of Thermal Behaviour of Flax with a Ramie Fibre-Reinforced Polymer Composite

Effects of Wet and Dry Treatments on Surface Functional Groups and Mechanical Properties of Flax Fiber Composites

Flax (Linum usitatissimum L.) Fibers for Composite Reinforcement: Exploring the Link Between Plant Growth, Cell Walls Development, and Fiber Properties

Study on mechanical and thermomechanical properties of flax/glass fiber hybrid‐reinforced epoxy composites

Effect of flax sheet prepared by wet-laying technology on tensile properties of flax/polypropylene composites

“Green” Composites from Renewable Resources: Preparation of Epoxidized Soybean Oil and Flax Fiber Composites

Flax fiber–based polymer composites: a review

Experimental analysis of duo-fiber interaction on the tensile strength of surface-modified flax–kenaf-reinforced epoxy composite

Mechanical property enhancement of flax fibers via supercritical fluid treatment

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Effect of Fiber Waviness on Tensile Strength of a Flax-Sliver-Reinforced Composite Material

New Insights into the Stiffness and Strength of Flax Composites from Tsai's Modulus and the Area of the Failure Envelope

Experimental Investigation of Bi-Directional Flax with Ramie Fibre-Reinforced Phenol-Formaldehyde Hybrid Composites

High-Performance Natural Fiber Composites Made from Technical Flax Textiles and Manufactured by Resin Transfer Molding