Abstract:A large-scale cable-stayed bridge in the state of New South Wales, Australia, has been extensively instrumented with an array of accelerometer, strain gauge, and environmental sensors. The real-time continuous response of the bridge has been collected since July 2016. This study aims at condition assessment of this bridge by investigating three aspects of structural health monitoring including damage detection, damage localization, and damage severity assessment. A novel data analysis algorithm based on incremental multi-way data analysis is proposed to analyze the dynamic response of the bridge. This method applies incremental tensor analysis for data fusion and feature extraction, and further uses one-class support vector machine on this feature to detect anomalies. A total of 15 different damage scenarios were investigated; damage was physically simulated by locating stationary vehicles with different masses at various locations along the span of the bridge to change the condition of the bridge. The effect of damage on the fundamental frequency of the bridge was investigated and a maximum change of 4.4% between the intact and damage states was observed which corresponds to a small severity damage. Our extensive investigations illustrate that the proposed technique can provide reliable characterization of damage in this cable-stayed bridge in terms of detection, localization and assessment. The contribution of the work is threefold; first, an extensive structural health monitoring system was deployed on a cable-stayed bridge in operation; second, an incremental tensor analysis was proposed to analyze time series responses from multiple sensors for online damage identification; and finally, the robustness of the proposed method was validated using extensive field test data by considering various damage scenarios in the presence of environmental variabilities.

DESIGN AND REALIZATION OF STRUCTURAL DAMAGE ALARMING SYSTEM FOR LONG-SPAN CABLE-SUPPORTED BRIDGES

Structural Damage Warning of a Long-Span Cable-Stayed Bridge Using Novelty Detection Technique Based on Wavelet Packet Analysis

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Design and Realization of Structural Damage Alarming System for Long-Span Suspension Bridges

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Environmental Variability Study on the Measured Responses of Runyang Cablestayed Bridge Using Wavelet Packet Analysis

Structural Damage Alarming Indices for Long-Span Bridges Based on Wavelet Packet Energy Spectrum

Health Monitoring and Altering System On-Line of Bridge Structures Ⅱ——Signal Analysis and Extraction Method for Damage Identification

Structural Health Monitoring of Long-Span Suspension Bridges Using Wavelet Packet Analysis

Research Development Related To Structural Health Monitoring And Integrity For Runyang Yangtse River Bridge

Vibration-Based Bridge Health Monitoring using Telecommunication Cables

Establishment and Application of the Wind and Structural Health Monitoring System for the Runyang Yangtze River Bridge

The Basic Principle and Method of Structural Damage Alarming for Long-Span Bridges

Distributed Strain Damage Identification Technique for Long-Span Bridges under Ambient Excitation

Structural condition assessment of long-span suspension bridges using long-term monitoring data

Energy Damage Detection Strategy Based on Acceleration Responses for Long-Span Bridge Structures

Structural Health Monitoring and Safety Evaluation System for Sutong Yangtse River Bridge

THREE-STEP METHOD FOR DAMAGE DETECTION OF LONG SPAN CABLE-STAYED BRIDGES

Design and realization of structural damage alarming system for Runyang Yangtse River Bridge

A multi-way data analysis approach for structural health monitoring of a cable-stayed bridge