Fast Model of Transient Electromagnetic Response to Geological Structures Ahead of Tunnel Face

Lanbo Liu,Fengkai Zhang,Qinghua Huang,Shucai Li,Huaifeng Sun
DOI: https://doi.org/10.3233/978-1-61499-767-2-211
2017-01-01
Abstract:Safety is the key issue during the process of tunnel construction. High pressure water and mud burst and the resultant tunnel face collapse is one of the major hazards in any tunneling projects. Detection and forecasting of potential water-bearing geological structures (usually one or another kind of zone of weakness, such as faults and shear zones) in front of the tunnel face, consequently, is the first step to reduce the risk in tunnel construction. Transient (or time domain) electromagnetic (TEM) survey is a major tool to detect and image conductive targets in the geologic formation so that it is an effective method to sense water-bearing structures (high water content resulting in a high conductivity zone than the surrounding formations). Previous studies on the response of TEM to water-bearing structures in front of tunnel face demonstrated that TEM is a cost-effective non-destructive evaluation (NDE) method for detect abnormal geological structures ahead of tunnel face. However, the direct computation of TEM response in the diffusion domain is computationally intensive. In this paper we adopt the correspondence principle between diffusion and wave propagation and compute the TEM response in the fictitious wave domain. With this approach we can take the advantage of the matured techniques in numerical simulation of wave propagations in time domain (such as the finite difference time domain, or FDTD). We then transform the fictitious wave field back to the diffusion domain to compare with the observation or put into the inversion process. This approach substantially increases the computation efficiency. We introduce an explicit definition of the reference frequency omega(0) based on the transition frequency. Based on this definition we can further define the fictitious wave propagation velocity and the equivalent electromagnetic (EM) properties of the materials. We used this approach computed the TEM response in a tunnel boring machine constructed tunnel case. The results obtained by our approach is compared with the results from direct model of TEM. The comparison results indicate that our modeling results bear all the major features that shown in the direct model. However, our approach can save about 10 times of the computation time for the same tunnel model.
What problem does this paper attempt to address?