Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Influence of Rotor Eccentricity on Radial Electromagnetic Force Characteristics in Switched Reluctance Motors and Compensation

Unbalanced Magnetic Force In Permanent Magnet Machines Having Asymmetric Windings And Static/Rotating Eccentricities

Unbalanced Magnetic Force Prediction in Permanent Magnet Machines with Rotor Eccentricity by Improved Superposition Method

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Influence of slot/pole combination and magnet thickness on unbalanced magnetic force in PM machines with different rotor eccentricities and magnetizations

Analysis and Suppression of Rotor Eccentricity Effects on Fundamental Model Based Sensorless Control of Permanent Magnet Synchronous Machine

Electromagnetic performance of interior permanent magnet machines with eccentricity

Distortion of Back-Emf and Torque of Pm Brushless Machines Due to Eccentricity

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Comparative Analysis of Unbalanced Magnetic Force in Fractional-Slot Permanent Magnet Machines Having External Rotor Topologies

An Analytical Model of Unbalanced Magnetic Force in Fractional-Slot Surface-Mounted Permanent Magnet Machines

Analysis of electromagnetic torque in sinusoidal excited switched reluctance machines having DC bias in excitation

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Comparison of Eccentricity Impact on Electromagnetic Forces in Internal- and External-Rotor Permanent Magnet Synchronous Motors

A Numerical Method to Determine the Radial Electromagnetic Force of the Switched Reluctance Motor Under Air Gap Eccentricity

Investigation of Postdemagnetization Unbalanced Magnetic Force in PM Machines Considering Short-Circuit Faults

The Active Unbalanced Vibration Compensation of the Flexible Switched Reluctance Motorized Spindle

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Mechanism analysis and optimum control of negative airgap eccentricity effect for in-wheel switched reluctance motor driving system

Analysis of dynamic electromagnetic stress in synchronous reluctance motor accounting for rotor eccentric

Investigation of Skewing Effects on the Vibration Reduction of Three-Phase Switched Reluctance Motors