Abstract:A completely autotrophic nitrogen removal over nitrite (CANON) reactor was established by seeding ordinary activated sludge with reject water as the influent at (30±3)℃ from a sewage treatment plant in Qingdao. To solve bacterial loss and optimize reactor performance, a suspension of biological carriers was added to the CANON reactor. The result showed that the reactor was successfully started 130 days later. The total nitrogen removal load was up to 0.03 kg·(m3·d)-1, and the average variation ratio of nitrate and ammonia (RNaA) was 0.09, which was close to theoretical value 0.11. The CANON active sludge reactor ran for 300 days. During the stable operation period, the total nitrogen removal rate was stable at 0.20 kg·(m3·d)-1. Red granular sludge was mixed with the effluent of the system, and the particle size of granular sludge was between 1 and 3 mm. The suspension carriers were added to the CANON reactor with a filling rate of 30%. The fillers added to the moving bed biofilm reactor (MBBR) were mature fillers in the nitrifying reactor of the laboratory. The accumulation rate of nitrification was greater than 95%, and the ammonia-oxidized surface load reached 2.0 g·(m2·d)-1. After 30 days of operation and culturing, the system was successfully converted to a pure membrane system, and the biofilm on the surface of the carrier turned pale red. The total nitrogen removal load was up to 0.17 kg·(m3·d)-1. The average RNaA was 0.14, which was slightly higher than the theoretical value of 0.11. This suggested that the CANON sludge adapted to the environment in the MBBR and began to enter a stable stage. The CANON-MBBR ran for 200 days. During the stable operation period, the total nitrogen removal rate was stable at 1.15 kg·(m3·d)-1. The biofilm was bright brick red with a thickness of 150-250 μm. MLSS and MLVSS on the carriers were approximately 10200 mg·m-2 and 9000 mg·m-2, respectively, and the total biomass in the system was approximately 1.5 kg. Through high-throughput sequencing, AOB and AnAOB were found to be the dominant bacteria species on the suspension carrier, with a relative abundance of 26.24% and 30.08%, respectively, and nitrate oxidizing bacteria were successfully suppressed. The above results showed that CANON-MBBR with high-density polyethylene filler as the suspension carrier had good nitrogen-removal efficiency and was conducive to the stable operation of the autotrophic nitrogen removal process.

Effect of Filter Medium on the Enhancement of Complete Autotrophic Nitrogen Removal over Nitrite Process in a Tidal Flow Constructed Wetland

Performance of a Completely Autotrophic Nitrogen Removal over Nitrite Process for Treating Wastewater with Different Substrates at Ambient Temperature

Treatment of Ammonium-Nitrogen–Contaminated Groundwater by Tidal Flow Constructed Wetlands Using Different Substrates: Evaluation of Performance and Microbial Nitrogen Removal Pathways

Performance and influence factors of completely autotrophic nitrogen removal over nitrite (CANON) process in a biofilter packed with volcanic rocks

Effects of hydraulic loading rate and substrate on ammonium removal in tidal flow constructed wetlands treating black and odorous water bodies

How Substrate Influences Nitrogen Transformations in Tidal Flow Constructed Wetlands Treating High Ammonium Wastewater?

Dynamics of Nitrogen Transformation Depending on Different Operational Strategies in Laboratory-Scale Tidal Flow Constructed Wetlands.

Nitrogen Removal Pathways in A Tidal Flow Constructed Wetland under Flooded Time Constraints

Shift in microorganism and functional gene abundance during completely autotrophic nitrogen removal over nitrite (CANON) process

Effect of drained-flooded time ratio on ammonia nitrogen removal in a constructed wetland-microbial fuel cell system by tidal flow operation

Nitrogen Removal and Microbial Characteristics in CANON Biofilters Fed with Different Ammonia Levels.

Inoculation of ANAMMOX Sludge for Ultra-Fast Start-Up of CANON Process and Performance Optimization

Efficient Nitrogen Removal from Mainstream Sewage in Tidal Flow Constructed Wetlands: Targeted Migration and Conducive Spatial Distribution for Pollutants Removal

[Start-up and Performance Optimization of a CANON Pilot Reactor]

Start-up of Completely Autotrophic Nitrogen Removal Over Nitrite Enhanced by Hydrophilic-Modified Carbon Fiber

Nitrogen removal performance by CANON biological filtration with denitrification

Iron-carbon micro-electrolysis facilitates autotrophic denitrification and Feammox in tidal flow constructed wetlands for enhanced nitrogen removal and reduced N 2 O emissions

Re-Start-Up Technique of CANON Process in an Up-Flow Biofilter Reactor

Achieving High Performance Completely Autotrophic Nitrogen Removal in a Continuous Granular Sludge Reactor

Performance of MTF-CWs process in enhanced nitrogen removal from excess sludge anaerobic digester liquids

Novel Biochar/Fe-Modified Biocarriers Assisted Tidal-Flow Constructed Wetlands for Enhanced Nitrogen Removal from Eutrophic Water under Low Temperatures