Abstract:Mesoporous carbon materials with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2,3-dihydroxynaphthalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)(2)center dot 6H(2)O] solution in 2-propanol, which was added to the carbon-silica nanocomposite prior to thermal treatment. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 degrees C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM), and in situ electron diffraction X-ray spectroscopy (EDX). While TG analysis revealed carbon contents lower than 30 wt.-%, nitrogen adsorption provided information about the homogeneity of the carbon thin film deposited onto the mesopore walls of the ordered silica templates SBA-15. The templates, carbon-silica nanocomposites, and carbon inverse replicas with nickel nanoparticles exhibit uniform pores, high surface areas, and large pore volumes. Partially graphitic carbon was identified by the presence of a characteristic G band in the Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD. The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles are uniform in size, ca. 3 nm, and are homogeneously dispersed on the tubular carbon walls. A few larger clusters of nickel, ca. 60 nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles are largely composed of Ni with traces of NiO. Similar nanoparticle dispersions have been reported only for Ni-containing multiwalled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbon materials, CMK-3, possess larger Ni/NiO nanoparticles. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009)

One-step preparation, characterization and adsorption property of mesoporous nickel sulfides in deep eutectic solvent

Low-temperature controlled synthesis of Ni3S4/NiS2 composite powder in deep eutectic solvent

Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Facile and controllable synthesis of NiS2 nanospheres in deep eutectic solvent

Chitosan/Silica Nanocomposite Preparation from Shrimp Shell and Its Adsorption Performance for Methylene Blue

Nonsolvent/Solvent-Induced Phase Separation to Multi-Porous Sulfonated Polystyrene/Chitosan/Silver Particles and Their Application in Adsorbing Chromium Ion(Iii) and Reduction of Methylene Blue

Adsorption and Desorption Characteristics of Nickel to Peat

Design of Nickel-Containing Nanocomposites Based on Ordered Mesoporous Silica: Synthesis, Structure, and Methylene Blue Adsorption

Deep eutectic solvent-assisted in-situ synthesis of nanosheet-packed Ni3S2 porous spheres on Ni foam for high-performance supercapacitors

One‐Step Synthesis of Thiol‐Functional Mesoporous Silica Nanospheres and Selective Removal of Cationic Dyes

Study on the removal of thiophene sulfides by porous core-shell SiO2 @Cu/Ni

Synthesis of nickel sulfide nanoparticles loaded on activated carbon as a novel adsorbent for the competitive removal of Methylene blue and Safranin-O

Effect of different preparation methods of nickel-based non-hydrodesulfurization adsorbent on desulfurization

Preparation of High Performance Adsorbents by Functionalizing Mesostructured Silica Spheres for Selective Adsorption of Organosulfur Compounds

One-step solvothermal synthesis of nickel selenide series: Composition and morphology control

Adsorption Desulphurisation of Dimethyl Sulphide Using Nickel-Based Y Zeolites Pretreated by Hydrogen Reduction

Effective removal of industrial dye from aqueous solution using mesoporous nickel oxide: a complete batch system evaluation

Selective and enhanced nickel adsorption from sulfate- and calcium-rich solutions using chitosan

Ordered Mesoporous Silica Prepared in Different Solvent Conditions: Application for Cu(II) and Pb(II) Adsorption

Preparation and characterization of nanocrystalline nickel monosulfide(h) via the ethanol-thermal reducing process

Fabrication of Powders and Thin Films of Various Nickel Sulfides by Soft Solution-Processing Routes