Abstract:Sleeping is an important human activity and heating system is needed for a comfort sleeping thermal environment in winter. By combining the merits from both an air source heat pump (ASHP) and a Chinese-Kang heating system, a prototype bed-based ASHP (B-ASHP) system has been proposed, and several design/operating parameters were experimentally and numerically studied previously. A numerical study using a digital thermal manikin (DTM) on the impacts of four influencing factors, i.e., operating mode, bed surface temperature (tbed), thermal resistance of mattress (Rmat), and thermal resistance of quilt (Rq) on sleeping thermal comfort was carried out, and the study results are reported in this paper. The numerical study results suggested that firstly, to maintain a suitable sleeping thermal environment, the use of only the Horizontal section (H-Section) of the bed-based heating terminal of the B-ASHP system was adequate; however using the Horizontal and Vertical section (H+V-Section) could minimize the temperature difference between the micro-climate close to the bed and outside environment, although with a higher energy consumption. Secondly, tbed of the bed-based terminal should be carefully selected, and a tbed of 44 oC could both meet the requirement of thermal comfort and acceptable operating efficiency of the B-ASHP system. Thirdly, the use of a mattress would reduce the heat transfer from the bed-based terminal to a sleeping person and indoor space, however an excessively higher Rmat of mattress would reduce the heating capacity and operating efficiency, leading to a cold sleeping environment. Finally, the use of a quilt would help prevent the heat loss from a sleeping person, thereby maintaining a warmer sleeping thermal environment, however a higher-than-necessary Rq of quilt would decrease the sleeping thermal comfort.

Determining thermal resistance of down quilt based on a mathematical heat transfer model

Optimization of the quilting method and filling quality of cold-proof down clothing based on thermal insulation performance

Numerical modeling of heat transfer and fluid motion underneath infant bedding

Experimental Investigation of the Influence of Structural Parameters on the Radiative Transmittance of Goose-Down Polyester Nonwovens for Cold Weather Clothing

Simulation of Heat Transfer Through Woven Fabrics Based on the Fabric Geometry Model

An Effective Method to Determine Bedding System Insulation Based on Measured Data

A Numerical Simulation on Heat Transfer of Fabric Based on the Yarn Interweaved Structure

Effects of Structural Parameters on the Thermal Insulation Properties of Coated Carbon Fiber Fabrics

Evaluation on the Performance of Quilts Based on Young People's Sleep Quality and Thermal Comfort in Winter

A Heat Transfer Model for Sleep Quality Evaluation

Simulation Investigation of Effects of Structural Density on the Thermal Insulation Property of Glass Fiber Fabric

Simulation of the Effects of Structural Parameters of Glass Fiber Fabric on the Thermal Insulation Property

A numerical study on evaluating sleeping thermal comfort using a Chinese-Kang based space heating system

Heat transfer simulation of electric heating fabric system and parametric design: Towards human thermal comfort and energy efficiency

Thermal Sensation and Sleep Quality in Different Combinations of Indoor Air Temperature and Bedding System Conditions

Determination for Thickness of the Multilayer Thermal Insulation Clothing Based on the Inverse Problems

Modelling and Experimental Study on Electrically Heating Garment to Enhance Personal Thermal Comfort

Experimental, numerical and theoretical study on heat transfer in paper honeycomb structure

Numerical Study On The Characteristics Of Heat Release From Human Body

Thermal Insulations of Multilayer Clothing Systems Measured by A Bench Scale Test in Low Level Heat Exposures

Numerical study on the effect of thermal pad on enhancing interfacial heat transfer considering thermal contact resistance