Abstract:Summary The direct drive manipulator, which directly links the joint shaft to the motor rotor, is susceptible to external disturbances and model perturbations. When the direct drive manipulator operates with varying payloads, the disturbance observer (DOB) with a constant nominal model struggles to achieve satisfactory performance. To minimize estimation errors caused by disturbance, enhance trajectory tracking accuracy, and improve system robustness, this article proposes a controller parameter self‐tuning strategy with settling time, fused with a nominal model adaptive disturbance observer. Specifically, by optimizing the gain coefficient of the model reference adaptive identification (MRAI), the significant changes in payload at the manipulator's end joint can be quickly and accurately estimated. The inertia introduced by the payload is then employed to continuously update the nominal model of the manipulator, incorporating information about the inertia of the coupling joints. In addition, the controller parameters are updated using a self‐tuning link with settling time, which guarantees that the closed‐loop characteristics of the system remain unaffected by payload changes. Finally, the proposed method was validated using a two‐joint direct drive manipulator. The results demonstrate the robustness of the proposed method in the presence of significant payload changes, and the accuracy of disturbance estimation and the tracking performance of the proposed control strategy is significantly improved.

Adaptive Neuron for Moment of Inertia and Torque Control Based on State Observer

An Adaptive Observer Design for Sensorless Control of Induction Motors

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment

Adaptive Controller and Observer Design for A Class of Nonlinear Systems

Sensorless Interior-Pmsm Control with Rotational Inertia Adjustment

Application of Adaptive Observer to Sensorless Induction Motor Via Parameter-Dependent Transformation

Adaptive Neural Network-Based Finite-Time Impedance Control of Constrained Robotic Manipulators With Disturbance Observer

A Pd Controller Of Flexible Joint Manipulator Based On Neuro-Adaptive Observer

An Algorithm for Online Inertia Identification and Load Torque Observation Via Adaptive Kalman Observer-Recursive Least Squares

Neural Network-Based Adaptive Controller Design of Robotic Manipulators with an Observer

Observer-Based Adaptive Optimized Control for Stochastic Nonlinear Systems With Input and State Constraints

Model-free Adaptive Position Tracking Control of Induction Motors Based on Memory-based Data-driven Extended State Observers

Adaptive Composite Observer-Based Global Finite Time Control with Prescribed Performance for Robots

Adaptive Observer Design for Wide-Speed Sensorless IPMSM Drives Via Equivalent Control Method

Observer-based Control for Robotic Manipulations with Uncertain Kinematics and Dynamics

Parameters self‐turning controller fused with an adaptive nominal model for disturbance observer: Application to direct drive manipulator with significant payload changes

Neuro-adaptive observer based control of flexible joint robot.

Neural network prescribed-time observer-based output-feedback control for uncertain pure-feedback nonlinear systems

Adaptive Observer-Based Finite-Time Fault Tolerant Control for Non-Strict Feedback Systems

Position controller for servo systems based on state observer and feedback