Abstract:In this paper, we investigate the vehicle lateral dynamics stabilisation problem to enhance vehicle handling by considering time-varying longitudinal velocity. The longitudinal velocity is described by a polytope with finite vertices and a novel technique is proposed to reduce the number of vertices. Since the tyre dynamics is nonlinear, the cornering stiffness is represented via the norm-bounded uncertainty. Concerning the time-varying velocity and the nonlinear tyre model, a linear parameter-varying vehicle model is obtained. As the velocity and the states are measurable, a gain-scheduling state-feedback controller is introduced. In the lateral control, the sideslip angle is required to be as small as possible and the yaw rate is constrained to a certain level. Thus, the control objective is to minimise the sideslip angle while the yaw rate is under a prescribed level or constrain both the sideslip angle and the yaw rate to prescribed levels. To consider the transient response of the closed-loop system, the D-stability is also employed in the energy-to-peak control. The optimal controller can be obtained by solving a set of linear matrix inequalities. A nonlinear vehicle model is utilised to illustrate the design procedure and the effectiveness of the proposed design method. Finally, simulations and comparisons are carried out to show the significant advantage of the designed controller. Compared to the open-loop system, the closed-loop system with the designed controller can achieve much smaller sideslip angle and the yaw rate is closer to the desired yaw rate from a reference model. Therefore, the vehicle safety and the handling are both improved in our simulation cases.

A Feedback Linearization Controller Combined with a Data-Driven Subspace-Based Prediction Method for Vehicle Handling Stabilization

A Data-Driven Predictive Controller Combined with the Vector Autoregressive with Exogenous Input Model and the Propagator Estimation Method for Vehicle Lateral Stabilization

Nonlinear Vehicle Dynamics Control for EV with 4 In-Wheel Motors

Nonlinear Predictive Control of Active Four-wheel Steering Vehicles

Real-time Model Predictive Controller for Vehicle Lateral Stabilization under Extreme Conditions

Research on Model Predictive Control Method for Vehicle Lateral Stability Based on Hardware-in-the-Loop Test

Design Of Vehicle Yaw Stability Controller Based On Model Predictive Control

Study on Integrated Control of Vehicle Yaw and Rollover Stability Using Nonlinear Prediction Model

Vehicle Lateral Dynamics Control Through AFS/DYC and Robust Gain-Scheduling Approach

Real-Time Yaw Rate Prediction Based on A Non-Linear Model and Feedback Compensation for Vehicle Dynamics Control

Longitudinal and Lateral Coupling Vehicle Stability Controller Designed Based on Piecewise T-S Fuzzy Model

Improving Vehicle Handling Stability Based on Combined AFS and DYC System Via Robust Takagi-Sugeno Fuzzy Control

Robust gain-scheduling energy-to-peak control of vehicle lateral dynamics stabilisation

A Model-Free Control Strategy for Vehicle Lateral Stability with Adaptive Dynamic Programming

Design and Experimental Verification of Real-Time Nonlinear Predictive Controller for Improving the Stability of Production Vehicles

Gain-scheduled robust control for lateral stability of four-wheel-independent-drive electric vehicles via linear parameter-varying technique

Coordinated Control For Vehicle Handling And Stability: A Fuzzy Robust Approach

A Reliable Robust Control Method for Vehicle Lateral Dynamics with Preview Driver Model

Robust Gain-Scheduled Output Feedback Yaw Stability Control for In-Wheel-motor-driven Electric Vehicles with External Yaw-Moment

Predictive lateral control to stabilise highly automated vehicles at tire-road friction limits