Abstract:A new analysis tool, an unsteady Hybrid Navier-Stokes-Nortex model, for a horizontal axis wind turbine (HAWT) has been developed for yawed flow by coupling a prescribed wake Vortex Line Method (VLM) with an unsteady Navier-Stokes solver, and its convergence and computational cost have been studied for 10 and 20 degrees of yaw. In this study, a steady viscous solution of a hybrid method is compared in detail with a full-scale Navier-Stokes simulation as a validation. Furthermore, the unsteady hybrid solver is applied to the NREL Unsteady Aerodynamics Experiment (UAE) Phase VI rotor. A test case under 10 degrees of yaw shows that the global power output agrees well with the NREL experiment, and 10 cycles of computation require less than three days using a work station under a serial CPU simulation. The same simulation performed using a super computer is used as reference, and it is estimated that the equivalent case can be obtained about 8 times faster using the work station with the present method, while keeping the same level of accuracy, than a full-domain Navier-Stokes simulation. To treat high yaw cases, new distorted prescribed vortex sheets are modeled with the VLM code. To see the difference between the base helix and the distorted helicoidal wake, unsteady hybrid VLM/Navier-Stokes solutions are examined for selected azimuth angles, and results are contrasted to a free wake BEM and NREL experimental data. For low yaw angles, the base helix approximation agrees well with the distorted helix, and yield better prediction than a free wake model, whereas for high yaw angles of more than 30 degrees, the present distorted wake gave a lower estimation of rotor torque than the free wake solver.

Aeroservoelastic Simulations for Horizontal Axis Wind Turbines

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Development and Validation of a CFD Technique for the Aerodynamic Analysis of HAWT

Performance Enhancement of Horizontal Axis Wind Turbine Using Numerical Techniques

Analyzing and Validating Energy Performance through Computational Simulation of a Helical Vertical Axis Wind Turbine

Extension Of An Unsteady Hybrid Navier-Stokes/Vortex-Panel Solver To Wind Turbine Aerodynamic Simulations At Higher Yaw Angles

Coupled Aero-Hydro-servo-elastic Methods for Floating Wind Turbines

Accuracy and Consistency of CFD and Engineering Models for Simulating Vertical Axis Wind Turbine Loads

Aerodynamic Modeling of Floating Vertical Axis Wind Turbines Using the Actuator Cylinder Flow Method

Large eddy simulations of a utility‐scale horizontal axis wind turbine including unsteady aerodynamics and fluid‐structure interaction modelling

Modeling and Simulation Study of a Novel Bat Sand Vertical Axial-Wind Turbine

Impact of the aerodynamic model on the modelling of the behaviour of a Floating Vertical Axis Wind Turbine

Aeroelastic simulation of multi-MW wind turbines using a free vortex model coupled to a geometrically exact beam model

Development and assessment of an actuator volume method in rotating frame for predicting the flow-field of horizontal-axis wind turbines

A Fully Coupled Method for Numerical Modeling and Dynamic Analysis of Floating Vertical Axis Wind Turbines

Study on the Aeroelastic Responses of a Wind Turbine Using a Coupled Multibody-Fvw Method

Numerical Simulation of Vertical Axis Wind Turbine with Cambered Airfoil

Inverse Design of Single- and Multi-Rotor Horizontal Axis Wind Turbine Blades using Computational Fluid Dynamics

Aerodynamic Analysis And Optimization Of Wind Turbines Based On Full Free Vortex Wake Model

Controller design for model-scale rotors and validation using prescribed motion

Modeling and hardware-in-the-loop implementation of real-time aero-elastic-electrical co-simulation platform for PMSG wind turbine