Abstract:Purpose The purpose of this paper is to analyze wind characteristics and their effects on wind turbine components and energy generation at the candidate site. Design/methodology/approach The methodology covered the detailed investigation of wind characteristics using Weibull k and c parameters and standard deviation at 30 m above the ground level (AGL). The wind shear coefficient and air density were also studied. The weight model was developed to determine the effects on wind turbine components and energy generation. At last, an economic assessment was carried out to determine the pre- and post-effects of the weight model on the cost of energy per kilowatt-hour. Findings The mean standard deviation, Weibull k parameter and Weibull c parameter were found to be 2.157, 2.617 and 6.087 m/s, respectively, at 30 m for a period of a year. The mean wind shear coefficient was found to be 0.176 for a year. The calculated results showed that site-specific midrange and amplitude force were 40.95 per cent and 37.75 per cent on wind turbine mechanical components, respectively. The average rise in force and drop in energy was found to be 35.50 per cent and 47.55 per cent, respectively. The lift coefficient, drag coefficient and pitching moment considering values (a, 0.1 and 0.2) showed an increase in force on wind turbine components that resulted in a drop in energy. The cost assessment results showed that the cost of energy was increased from US$0.032/kWh to 0.0466/kWh for wind turbine A . Practical implications An accurate determination of the weight factor is necessary for near-reality assessment of wind energy yield and rise of force on the wind turbine. The results paved the way for site-specific design optimization of wind turbines. Originality/value The study contributes to the site-specific wind characteristic-based weight model to determine the effects of wind loads on wind turbine components and energy generation and compared with the specified design standard. The lift coefficient, drag coefficient and pitching moment coefficient show a rise in the force while considering the weight factor values. The results show that the site has the potential to generate energy at the lowest cost per kilowatt-hour, but it needs wind turbine design adjustments according to site-specific wind characteristics. If site-specific wind characteristics are considered, it would lead to maximum energy generation and high reliability of wind turbine components.

Research on Power Coefficient of Wind Turbines Based on Scada Data

Equivalent Modeling of Wind Energy Conversion Considering Overall Effect of Pitch Angle Controllers in Wind Farm

Adaptive Dual-layer Sliding Mode Control for Wind Turbines with Estimated Wind Speed

Least-square B-spline Approximation Based Wind Turbine Power Curve Modeling

Applied Systems Theory: Wind Turbine Output Power Prediction based on Wind Energy Utilization Coefficient

Effective Wind Speed Estimation Based Maximum Power Point Tracking Control for Variable-Speed Wind Turbine

Estimation of wind turbine power coefficient by adaptive neuro-fuzzy methodology

Wind turbine power coefficient models based on neural networks and polynomial fitting

Effective Wind Speed Estimation and Prediction Based Feedforward Feedback Pitch Control for Wind Turbines.

An Improved Optimal Torque Control Based on Estimated Wind Speed for Wind Turbines

A new method for prediction of power coefficient and wake length of a horizontal axis wind turbine based on energy analysis

Data-Driven Wind Turbine Power Generation Performance Monitoring

An Algorithm for Practical Power Curve Estimation of Wind Turbines

Output Power Modeling of Wind Turbine Based on State Curve Analysis

Wind Speed Estimation for PMSG-Based WECS under Power Limit Control

Assessment and Performance Evaluation of a Wind Turbine Power Output

Construction of wind turbine performance model based on SCADA data

Operation parameter interaction and optimization of vertical axis wind turbine analyzed by Taguchi method with modified additive model and ANOVA

Calculation and Analysis of Wind Turbine Health Monitoring Indicators Based on the Relationships with SCADA Data

Site specific assessment of wind characteristics and determination of wind loads effects on wind turbine components and energy generation

Wind Power Correction Method Including Multiple Factors Such As Wind-Abandon Coefficient