Strain hardening rate and strain rate sensitivity behavior of bcc/fcc-dual-phase tungsten heavy alloy
Jingxuan Sun,Lei Zhang,Yufeng Huang,Baishan Chen,Jiatao Zhou,Wensheng Liu,Yunzhu Ma
DOI: https://doi.org/10.1016/j.ijrmhm.2023.106363
IF: 4.804
2023-08-11
International Journal of Refractory Metals and Hard Materials
Abstract:90 W-7Ni-3Fe alloy is a heterogeneous biphasic alloy, and it is essential to investigate the impact of the biphasic microstructure on key mechanical properties at varying strain rates. To address this issue, the quasi-static and dynamic compressive mechanical properties of dual-phase 90 W-7Ni-3Fe alloy, single-phase pure W, and single-phase NiFe alloy were comparatively analyzed in conjunction with characterization analysis. The results indicate that the flow stress, strain hardening rate (SHR), and strain rate sensitivity (SRS) of the 90 W-7Ni-3Fe alloy at various strain rates are mainly due to the involvement of W particles during the initial strain, although the overall plastic deformation of the alloy is attributed to the continuous coordinated deformation of the W particles with γ-(Ni, Fe) phases in various regions. In addition, the compressed W phase shows a typical 〈111〉 and 〈100〉 BCC compression texture and the compressed γ-(Ni, Fe) phase shows a typical 〈110〉 FCC compression texture, both with high Schmidt factors. These characteristics are essential for slip transfer and strain transfer from the γ-(Ni, Fe) phase to the W phase. Notably, the increased number of slip systems at high strain rates makes them more susceptible to both types of transfer, resulting in higher flow stress, SHR, and SRS during initial deformation.
materials science, multidisciplinary,metallurgy & metallurgical engineering