Influence of Mo Doping on the Microstructure and Dielectric Property of Alumina Ceramic/Metal Composites

Zhang Hao,Shi Zhongqi,Hu Mengshan,Zhang Peng,Jin Haiyun,Qiao Guanjun,Jin Zhihao
2016-01-01
Rare Metal Materials and Engineering
Abstract:Mo-doped alumina (Al2O3/Mo) ceramic composites were prepared by a powder metallurgical process. The influence of Mo doping amount on the microstructure and dielectric properties of the composites were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and other testing analysis methods. The results show that the composites are composed of Al2O3 and Mo phases, and no new phases appear. Mo mainly disperses in the Al2O3 grain boundary. With increasing the Mo content, Al2O3 grain size declines and the porosity increases gradually. When the amount of Mo is below 20 wt%, there are no obvious changes in resistivity (>10(12) Omega.cm) and in permisittvity (8 similar to 9) for the composites. When the doping amount is over 20 wt%, Mo transforms from the dispersed phase into the continuous phase while volume resistivity decreases to 10(10) Omega.cm sharply. When the doping amount is 40 wt%, since the throughout matrix of Mo is formed, the volume resistivity decreases slowly, and becomes steady at about 10 Omega.cm. Therefore, ceramic/metal composite materials with different resistivities can be prepared by adjusting the amount and phase distribution of Mo in Al2O3 matrix.
What problem does this paper attempt to address?