Abstract:White-light OLED devices play an important application in information display fields. Optical interference of the microcavity structure has an important effect on device performances. According to the design of the band structure, ITO/MoO3 composite films were used as the anode, and Mg : Ag (1%) composite films were prepared by coevaporation as the translucent cathode; CuPc was used as the hole injection layer and anode passivation layer, NPB as the hole transmission layer and yellow light main material, rubrene as yellow dopant material, ADN as blue light main material, DSA-Ph as blue dopant material, and TPBi and Alq3 as the electron transport layers. We realized the change of the microcavity structure by adjusting the thickness of each organic functional layer film and simulated and calculated the optimized thickness of each organic film layer and influence on OLED device performances using the SimOLED software system. The optimized OLED microdisplay structure is Si(CMOS)/ITO (35 nm)/MoO3 (2 nm)/CuPc (5 nm)/2-TNATA (20 nm)/NPB (10 nm)/NPB : rubrene (1.5%)ADN : DSA-Ph (5%) (25 nm)/TPBi (15 nm)/Alq3 (1.2 nm)/Mg (13 nm) : Ag (1%). The optimized OLED microdisplay was prepared by the vacuum coating system, and the photoelectric performances of the OLED device were characterized by a spectral testing system consisting of the Photo Research PR655 spectrometer and Keithley 2400 program-controlled power supply. The effect of the microcavity structure on OLED device performances was studied. The results show that the variation of the film thickness of each organic functional layer has an important effect on the performances of OLED microdisplay, such as brightness and color coordinate, and the OLED microdisplay reaches a higher brightness of 3342 cd/m2 under the normal working voltage at 5.0 V after the structure is optimized, with CIE coordinate (0.28, 0.37), which is closer to the energy point of standard white light.

Simulation and Optimization for the Optical Performance of Top-Emitting OLED

Optical Design For Improving Optical Properties Of Top-Emitting Organic Light Emitting Diodes

Accurate Optical Optimization of Light-Emitting Diodes with Consideration of Coupling Between Purcell Factor and Transmittance Coefficient

Improved Light Outcoupling and Mode Analysis of Top-Emitting OLEDs on Periodically Corrugated Substrates

Simulation on Light Extraction Efficiency of Photonic-crystal-slab Based OLED with FDTD Method

Numerical analysis of nanostructures for enhanced light extraction from OLEDs

Mesoscopic Optical Structure to Enhance the Out-Coupling Efficiency of Blue Top OLED

Light Outcoupling Integrated Photonic Crystals for OLEDs

Light Extraction Efficiency in OLED with Sub-wavelength Structures

Thin-film Encapsulation for Top-Emitting Organic Light-Emitting Diode with Inverted Structure

Improving Light Outcoupling Efficiency for OLEDs with Microlens Array Fabricated on Transparent Substrate

Research on the High Light Out-Coupling Efficiency Deep-Blue Top-Emitting Organic Light-Emitting Diode through FDTD Optical Simulation

Reflective 3D pixel configuration for enhancing efficiency of OLED displays

Optical design of organic light emitting diodes

Efficient and Rigorous Modeling of Light Emission in Planar Multilayer Organic Light-Emitting Diodes

Enhancement of Light Extraction of Green Top-Emitting Organic Light-Emitting Diodes with Refractive Index Gradually Changed Coupling Layers

Analysis and Structure Optimization of Nanostructure-Embedded Organic Light-Emitting Diodes

Research of the Light Extraction Efficiency in OLED with Hexagon Lattice Based Nanometer Structure

High Light-Extraction-efficiency OLED Based on Photonic Crystal Slab Structures with Taper Unit Cells

Recent Advances in OLED Optical Design

Design Simulation and Preparation of White OLED Microdisplay Based on Microcavity Structure Optimization