Abstract:Underwater autonomous vehicles (UAVs) actuated by smart actuators have attracted increasing attention. A miniature macro fiber composite (MFC)-actuated robot fish inspired by koi fish is developed. A cantilever mechanism is designed to transfer the dynamic micro thrust of the robot fish. Three design indexes, namely the bending stiffness, the ratio of the bending stiffness to the torsional stiffness, and the natural frequency of the cantilever transducer are proposed. Thus, a simple and effective method to determine the structural parameters of the cantilever-based micro thrust force measurement system is presented. Calibration results demonstrated that the parameters of the proposed cantilever transducer match well with the designed indexes. Dynamic variation mechanisms of the micro thrust force associated with the swimming behaviors of the robot fish are well captured using the proposed measurement system. Experimental results show that the MFC-actuated robot fish obtains the biggest mean thrust of 1.73 mN in the case of the largest oscillating velocity. The maximum instant thrust grows with the increment of the oscillating frequency, and achieves its maximum of 7.35 mN in the case of 10 Hz. While the maximum instant drag first decreases then increases as the actuation frequency increases, and obtains its minimum of -2.62 mN in the case of the maximum oscillating velocity. On the contrary, variations of the thrust pattern/oscillating period are reversed to those of the maximum instant drag. Computational fluid dynamics results demonstrate that variations of the instant thrust are fully determined by the distribution and intensity of the concentrated pressure regions induced by the oscillating caudal fin. The cycle-averaged velocity fields are closely related to the mean thrust generated by the MFC-actuated robot fish. As a result, the fluid-structure interaction mechanisms associated with the thrust variations of the MFC-actuated robot fish are revealed. This study may be useful for the design and realization of UAVs actuated by smart actuators.

Design of A Thrust-Vectoring Tailcone Based on 3-Rrrr Parallel Manipulator for Small-Size Autonomous Underwater Vehicles

Computational Fluid Dynamics Study of Autonomous Underwater Vehicle with Vectorial Thrusters

Kinematic analysis and advanced control of a vectored thruster based on 3RRUR parallel manipulator for micro-size AUVs

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

TJ-FlyingFish: an Unmanned Morphable Aerial-Aquatic Vehicle System

A Minimal Thrust Vectoring Rotor with Six Degree of Freedom: Design and Analysis

Locating, Trajectory Planning and Control of an Underwater Propeller Cleaning Manipulator

Cantilever-based Micro Thrust Measurement and Pressure Field Distribution of Biomimetic Robot Fish Actuated by Macro Fiber Composites (mfcs) Actuators

The Design and Application of a Vectored Thruster for a Negative Lift-Shaped AUV

Research on an Autonomous Underwater Helicopter with Less Thrusters

Development of an Autonomous Underwater Helicopter with High Maneuverability

A 3-DOF caudal fin for precise maneuvering of thunniform-inspired unmanned underwater vehicles

Trajectory tracking control of vectored thruster autonomous underwater vehicles based on deep reinforcement learning

Hydrodynamic Performance Of A Flapping Wing Based Auv-A Numerical Study

Simulation and experimental validation ofan autonomous underwater vehicle equipped with multi-vectored thrusters

A high maneuvering motion strategy and stable control method for tandem twin-rotor aerial-aquatic vehicles near the water surface

Design, Modelling and Hovering Control of a Tail-Sitter with Single Thrust-Vectored Propeller.

Maneuverability design and analysis of an autonomous underwater vehicle for deep-sea hydrothermal plume survey

Maneuverability analysis of thrust vectoring ducted propeller with deflector

Hydrodynamic analysis and manipulation control on a streamlined I-AUV