Abstract:Formaldehyde is an important carcinogen commonly found indoors. Its indoor sources have been intensively investigated. But study on outdoor formaldehyde concentration, which is potentially an important source to indoors, remains scarce. This study attempts to characterize temporal and spatial distribution of the atmospheric formaldehyde concentration in Chinese cities. Diurnal variation of ambient formaldehyde was examined in 6 cities and peak hours were identified between 12:00 pm and 3:00 pm. Consequently, outdoor formaldehyde concentrations were measured in the peak hours in 30 cities during the summer months of Jul.-Aug., 2022. The formaldehyde concentrations in the peak hours fell into a range of 0.005–0.087 mg/m3 (median value is 0.027 mg/m3), 87.7% of which have exceeded the chronic reference exposure criteria of 0.009 mg/m3 set by Office of Environmental Health Hazard Assessment. Health risk analysis suggests that exposure to ambient formaldehyde could cause a median carcinogenic risk of 1.9 × 10−5 (3.17×10−6–6.13×10−5), higher than threshold limit of 10−6. Pearson correlation analysis of the 30 cities shows that ambient summertime atmospheric formaldehyde concentrations of the city are positively correlated with its Gross Domestic Product (r = 0.48). We also found that the outdoor formaldehyde concentrations in urban areas (median: 0.017 mg/m3) is slightly higher than those in suburban areas (median: 0.013 mg/m3). Results here prove that outdoor formaldehyde is ubiquitous in Chinese cities and reduces effectiveness of ventilation in dilution indoor concentrations. Neglecting it would underestimate air cleaner capacity needed by a factor of about two. It should be accounted for in health analysis and air quality engineering control design of built environment in the future.

Can Carbon Dioxide Be a Good Indicator for Formaldehyde in Residences?-Monte Carlo Modeling for a Whole Year

An Investigation of Formaldehyde Concentration in Residences and the Development of a Model for the Prediction of Its Emission Rates

Long-term Variations of Indoor Formaldehyde Concentration and Emission Characteristics of Building Materials in Chinese Residences

Comprehensive Influence of Environmental Factors on the Emission Rate of Formaldehyde and VOCs in Building Materials: Correlation Development and Exposure Assessment

Monte Carlo Simulation to Control Indoor Pollutants from Indoor and Outdoor Sources for Residential Buildings in Tianjin, China

Indoor Formaldehyde in Real Buildings: Emission Source Identification, Overall Emission Rate Estimation, Concentration Increase and Decay Patterns

Simulation of Formaldehyde Distribution Characteristics under Different Indoor Conditions and Optimization of Monitoring Methods

Indoor Air Formaldehyde Measurement Analysis and Its Prediction Model

Development of a Physics-Based Model for Analyzing Formaldehyde Emissions from Building Material under Coupling Effects of Temperature and Humidity

Long-term Monitoring of Indoor CO2 and PM2.5 in Chinese Homes: Concentrations and Their Relationships with Outdoor Environments

Seasonal and diurnal patterns of outdoor formaldehyde and impacts on indoor environments and health

A 2D Covalent Organic Framework As a Sensor for Detecting Formaldehyde

Ventilation of Indoor Formaldehyde and Estimation of Its Emission and Air Exchange Rate

Ambient Formaldehyde Concentrations in Summer in 30 Chinese Cities and Impacts on Air Cleaning of Built Environment

Investigation of indoor air quality in coal-heating rural residential buildings in Northern China based on longtime monitoring

A Colorimetric Chemical Sensing Platform for Real-Time Monitoring of Indoor Formaldehyde

Laboratory Performance Evaluation of a Low-Cost Electrochemical Formaldehyde Sensor

Indoor air quality analysis of residential buildings in northeast China based on field measurements and longtime monitoring

Investigation of Indoor Formaldehyde Pollution in Newly Decorative Residences

Formaldehyde concentration and its influencing factors in residential homes after decoration at Hangzhou, China

Performance Analysis of Indoor Smart Environmental Control Factors: Using Temperature to Control the Rate of Formaldehyde Emission