Abstract:Polymeric dielectric composites have been widely used in the fields of sensing and energy storage fields because of their excellent properties. However, the performance of dielectric composites is not sufficiently aligned with the requirements of application due to low thermal conductivity. Therefore, the investigations of the new methods as the design of structure and modification of the fillers to prepare excellent comprehensive performance of materials have attracted great attention. In this work, Poly(vinylidene fluoride) (PVDF) is used as matrix to prepare dielectric materials due to its high dielectric permittivity and favorable flexibility. Boron nitride (BN) with high thermal conductivity and a wide band gap is adopted as fillers. Meanwhile, the modified BN (m-BN) was prepared by coating with polydopamine (PDA) to improve the compatibility between the matrix and the fillers. The multi-layer polymeric composites based on PVDF and m-BN was fabricated via layer by layer spin coating technique. The morphology of fracture surface of PVDF/m-BN composites was investigated by scanning electron microscope. Clear interfaces can be observed in the PVDF/m-BN composites. The influence of both structures and m-BN concentration on the dielectric properties and thermal conductivity of nanocomposites were also discussed. Compared with single-layer, multi-layer exhibited obvious improvement in dielectric constant. The dielectric constant of sandwich-layer nanocomposites with 10 wt% m-BN loading reached 16, which is 30% higher than that of single layer. These enhancements may be attributed to Maxwell-Wagner interfacial polarization, which was generated from the multi-layer structure. In addition, the thermal conductivity of sandwich layer is 4 folds of single layer and the breakdown strength of the composites has increased by 30% due to the well-organized m-BN. Therefore, this works offers a new method for the potential usage of sandwich-structural PVDF nanocomposites in electric power field.

Tunable Wave Absorption Properties of Β-Mno2 Nanorods and Their Application in Dielectric Composites

Synthesis and mechanism investigation of wide-bandwidth Ni@MnO2 NS foam microwave absorbent

Achieving Excellent Electromagnetic Wave Absorption Capabilities by Construction of MnO Nanorods on Porous Carbon Composites Derived from Natural Wood via A Simple Route

Preparation of MnO2@CNFs Composites and Their Tunable Microwave Absorption Properties

Preparation of MnO<sub>2</sub>@CNFs composites and their tunable microwave absorption properties

Sandwich-structural PVDF Nanocomposites with High Thermal Conductivity and Excellent Dielectric Properties

One-dimensional MnO@N-doped carbon nanotubes as robust dielectric loss electromagnetic wave absorbers

Enhanced Microwave Absorption Properties of Novel Hierarchical Core-Shell Δ/α MnO2 Composites

Enhanced microwave absorption properties of epoxy composites containing graphite nanosheets@Fe3O4 decorated comb-like Mn0(2) nanoparticles

Enhanced Electromagnetic Wave Absorbing Nickel (Oxide)-Carbon Nanocomposites

Enhanced Microwave Absorption Properties of Epoxy Composites Containing Graphite Nanosheets@fe3o4 Decorated Comb-Like MnO2 Nanoparticles

Low-temperature synthesis of manganese oxide–carbon nanotube-enhanced microwave-absorbing nanocomposites

In Situ Fabrication of Flower-Like Metallopolymeric Superstructure on Nd2Fe14B Template for Enhanced Microwave Absorption

Controllable synthesis of Fe3O4-based magneto-dielectric ternary nanocomposites and their enhanced microwave absorption properties

MOFs Derived Co@C@MnO Nanorods with Enhanced Interfacial Polarization for Boosting the Electromagnetic Wave Absorption.

Fabrication of multiple core-shell structures MnO@HsGDY@NC@HsGDY hybrid nanofibers for enhanced microwave absorption

Structural, Magnetic, and Electrical Investigations of PVA/Ni Ferrite/(MoS 2 ) x Nanocomposites

Surface-Functionalized MWNTs with Emeraldine Base: Preparation and Improving Dielectric Properties of Polymer Nanocomposites

Layered-structure N-doped Expanded-Graphite/boron Nitride Composites Towards High Performance of Microwave Absorption

Morphology Design of Co-electrospinning MnO-VN/C Nanofibers for Enhancing the Microwave Absorption Performances.

Construction of Nb2CTx/α-MnO2 composites by electrostatic self-assembly for controllable impedance matching and enhanced electromagnetic absorption