Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Hexagonal Convection Patterns and Their Evolutionary Scenarios in Electroconvection Induced by a Strong Unipolar Injection

Numerical Study of Electro-Convection Between Annular Electrodes Based on a Dissociation-Injection Mechanism

Full bifurcation scenarios and pattern formation of laminar electroconvection in a cavity

Three-dimensional Electro-Convective Flows of Dielectric Liquids Between Concentric Cylinders

Numerical study of pattern formation following a convective instability in non-Boussinesq fluids

Electro-thermo-convection in a high Prandtl number fluid: Flow transition and heat transfer

Simulation of Flow and Heat Transfer in Micro Couette Flow

Flow structure and heat transfer of electro-thermo-convection in a dielectric liquid layer

Cellular flow patterns and their evolutionary scenarios in three-dimensional Rayleigh-Bénard convection

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Transition Routes of Electrokinetic Flow in a Divergent Microchannel with Bending Walls

Suppression of Electroconvective and Morphological Instabilities by an Imposed Cross Flow of the Electrolyte

Nonlinear Evolution and Secondary Island Formation of the Double Tearing Mode in a Hybrid Simulation

Numerical analyses of wire-plate electrohydrodynamic flows

An Immersed Boundary-Lattice Boltzmann Method for Electro-Thermo-convection in Complex Geometries

Application of large eddy simulation models to electroconvection turbulence study with lattice Boltzmann method

Numerical investigation on electrohydrodynamic enhancement of solid–liquid phase change in three-dimensional cavities

Electro-Osmotic Flow and Mass Transfer through a Rough Microchannel with a Modulated Charged Surface

Formation of Large-Scale Structures in Ablative Kelvin–Helmholtz Instability

Lattice Boltzmann analysis for electro–thermo-convection with a melting boundary in horizontal concentric annuli

Formation and Evolution of Target Patterns in Cahn-Hilliard Flows